include/configs/trats2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Samsung Electronics
   4  * Sanghee Kim <sh0130.kim@samsung.com>
   5  * Piotr Wilczek <p.wilczek@samsung.com>
   6  *
   7  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
   8  */
   9
  10 #ifndef __CONFIG_TRATS2_H
  11 #define __CONFIG_TRATS2_H
  12
  13 #include <configs/exynos4-common.h>
  14
  15 #define CONFIG_TIZEN                    /* TIZEN lib */
  16
  17 #define CONFIG_SYS_L2CACHE_OFF
  18 #ifndef CONFIG_SYS_L2CACHE_OFF
  19 #define CONFIG_SYS_L2_PL310
  20 #define CONFIG_SYS_PL310_BASE   0x10502000
  21 #endif
  22
  23 /* TRATS2 has 4 banks of DRAM */
  24 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  25 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  26 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  27
  28 #define CONFIG_BOOTCOMMAND              "run autoboot"
  29
  30 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  31                                         - GENERATED_GBL_DATA_SIZE)
  32
  33 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  34
  35 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  36
  37 /* Tizen - partitions definitions */
  38 #define PARTS_CSA               "csa-mmc"
  39 #define PARTS_BOOT              "boot"
  40 #define PARTS_QBOOT             "qboot"
  41 #define PARTS_CSC               "csc"
  42 #define PARTS_ROOT              "platform"
  43 #define PARTS_DATA              "data"
  44 #define PARTS_UMS               "ums"
  45
  46 #define PARTS_DEFAULT \
  47         "uuid_disk=${uuid_gpt_disk};" \
  48         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  49         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  50         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  51         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  52         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  53         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  54         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  55
  56 #define CONFIG_DFU_ALT \
  57         "u-boot raw 0x80 0x800;" \
  58         "/uImage ext4 0 2;" \
  59         "/modem.bin ext4 0 2;" \
  60         "/exynos4412-trats2.dtb ext4 0 2;" \
  61         ""PARTS_CSA" part 0 1;" \
  62         ""PARTS_BOOT" part 0 2;" \
  63         ""PARTS_QBOOT" part 0 3;" \
  64         ""PARTS_CSC" part 0 4;" \
  65         ""PARTS_ROOT" part 0 5;" \
  66         ""PARTS_DATA" part 0 6;" \
  67         ""PARTS_UMS" part 0 7;" \
  68         "params.bin raw 0x38 0x8;" \
  69         "/Image.itb ext4 0 2\0"
  70
  71 #define CONFIG_EXTRA_ENV_SETTINGS \
  72         "bootk=" \
  73                 "run loaduimage;" \
  74                 "if run loaddtb; then " \
  75                         "bootm 0x40007FC0 - ${fdtaddr};" \
  76                 "fi;" \
  77                 "bootm 0x40007FC0;\0" \
  78         "updatebackup=" \
  79                 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
  80                 " mmc dev 0 0\0" \
  81         "updatebootb=" \
  82                 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
  83         "mmcboot=" \
  84                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
  85                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
  86                 "run bootk\0" \
  87         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
  88         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
  89         "verify=n\0" \
  90         "rootfstype=ext4\0" \
  91         "console=console=ttySAC2,115200n8\0" \
  92         "kernelname=uImage\0" \
  93         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
  94                 "${kernelname}\0" \
  95         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
  96                 "${fdtfile}\0" \
  97         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
  98         "mmcbootpart=2\0" \
  99         "mmcrootpart=5\0" \
 100         "opts=always_resume=1\0" \
 101         "partitions=" PARTS_DEFAULT \
 102         "dfu_alt_info=" CONFIG_DFU_ALT \
 103         "uartpath=ap\0" \
 104         "usbpath=ap\0" \
 105         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 106         "consoleoff=set console console=ram; save; reset\0" \
 107         "spladdr=0x40000100\0" \
 108         "splsize=0x200\0" \
 109         "splfile=falcon.bin\0" \
 110         "spl_export=" \
 111                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 112                    "setenv spl_imgsize 0x${spl_imgsize};" \
 113                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 114                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 115                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 116                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 117                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 118                    "spl export atags 0x40007FC0;" \
 119                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 120                    "mw.l ${spl_addr_tmp} ${splsize};" \
 121                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 122                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 123                    "setenv spl_imgsize;" \
 124                    "setenv spl_imgaddr;" \
 125                    "setenv spl_addr_tmp;\0" \
 126         ENV_ITB \
 127         "fdtaddr=40800000\0" \
 128
 129 /* GPT */
 130
 131 /* Security subsystem - enable hw_rand() */
 132 #define CONFIG_EXYNOS_ACE_SHA
 133
 134 /* Common misc for Samsung */
 135 #define CONFIG_MISC_COMMON
 136
 137 /* Download menu - Samsung common */
 138 #define CONFIG_LCD_MENU
 139
 140 /* Download menu - definitions for check keys */
 141 #ifndef __ASSEMBLY__
 142
 143 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
 144 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
 145 #define KEY_PWR_STATUS_MASK             (1 << 0)
 146 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
 147 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
 148
 149 #define KEY_VOL_UP_GPIO                 EXYNOS4X12_GPIO_X22
 150 #define KEY_VOL_DOWN_GPIO               EXYNOS4X12_GPIO_X33
 151 #endif /* __ASSEMBLY__ */
 152
 153 /* LCD console */
 154 #define LCD_BPP                 LCD_COLOR16
 155
 156 /* LCD */
 157 #define CONFIG_FB_ADDR          0x52504000
 158 #define CONFIG_EXYNOS_MIPI_DSIM
 159 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 160
 161 #endif  /* __CONFIG_H */