include/configs/trats.h

   1 /*
   2  * Copyright (C) 2011 Samsung Electronics
   3  * Heungjun Kim <riverful.kim@samsung.com>
   4  *
   5  * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_TRATS_H
  11 #define __CONFIG_TRATS_H
  12
  13 #include <configs/exynos4-dt.h>
  14
  15 #define CONFIG_SYS_PROMPT       "Trats # "      /* Monitor Command Prompt */
  16
  17 #define CONFIG_TRATS
  18
  19 #undef CONFIG_DEFAULT_DEVICE_TREE
  20 #define CONFIG_DEFAULT_DEVICE_TREE      exynos4210-trats
  21
  22 #define CONFIG_TIZEN                    /* TIZEN lib */
  23
  24 #define CONFIG_SYS_L2CACHE_OFF
  25 #ifndef CONFIG_SYS_L2CACHE_OFF
  26 #define CONFIG_SYS_L2_PL310
  27 #define CONFIG_SYS_PL310_BASE   0x10502000
  28 #endif
  29
  30 /* TRATS has 4 banks of DRAM */
  31 #define CONFIG_NR_DRAM_BANKS            4
  32 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  33 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  34 #define CONFIG_SYS_TEXT_BASE            0x63300000
  35 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  36
  37 /* memtest works on */
  38 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  39 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5000000)
  40 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
  41
  42 #define CONFIG_SYS_TEXT_BASE            0x63300000
  43
  44 #include <linux/sizes.h>
  45 /* Size of malloc() pool */
  46 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (80 * SZ_1M))
  47
  48 /* select serial console configuration */
  49 #define CONFIG_SERIAL2
  50 #define CONFIG_BAUDRATE                 115200
  51
  52 /* Console configuration */
  53 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  55
  56 /* MACH_TYPE_TRATS macro will be removed once added to mach-types */
  57 #define MACH_TYPE_TRATS                 3928
  58 #define CONFIG_MACH_TYPE                MACH_TYPE_TRATS
  59
  60 #define CONFIG_BOOTARGS                 "Please use defined boot"
  61 #define CONFIG_BOOTCOMMAND              "run mmcboot"
  62 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
  63
  64 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  65                                         - GENERATED_GBL_DATA_SIZE)
  66
  67 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  68
  69 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  70
  71 #define CONFIG_BOOTBLOCK                "10"
  72 #define CONFIG_ENV_COMMON_BOOT          "${console} ${meminfo}"
  73
  74 #define CONFIG_ENV_IS_IN_MMC
  75 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  76 #define CONFIG_ENV_SIZE                 4096
  77 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  78
  79 #define CONFIG_ENV_OVERWRITE
  80
  81 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  82 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  83
  84 /* Tizen - partitions definitions */
  85 #define PARTS_CSA               "csa-mmc"
  86 #define PARTS_BOOT              "boot"
  87 #define PARTS_QBOOT             "qboot"
  88 #define PARTS_CSC               "csc"
  89 #define PARTS_ROOT              "platform"
  90 #define PARTS_DATA              "data"
  91 #define PARTS_UMS               "ums"
  92
  93 #define PARTS_DEFAULT \
  94         "uuid_disk=${uuid_gpt_disk};" \
  95         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  96         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  97         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  98         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  99         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
 100         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
 101         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
 102
 103 #define CONFIG_DFU_ALT \
 104         "u-boot raw 0x80 0x400;" \
 105         "uImage ext4 0 2;" \
 106         "modem.bin ext4 0 2;" \
 107         "exynos4210-trats.dtb ext4 0 2;" \
 108         ""PARTS_CSA" part 0 1;" \
 109         ""PARTS_BOOT" part 0 2;" \
 110         ""PARTS_QBOOT" part 0 3;" \
 111         ""PARTS_CSC" part 0 4;" \
 112         ""PARTS_ROOT" part 0 5;" \
 113         ""PARTS_DATA" part 0 6;" \
 114         ""PARTS_UMS" part 0 7;" \
 115         "params.bin raw 0x38 0x8\0"
 116
 117 #define CONFIG_EXTRA_ENV_SETTINGS \
 118         "bootk=" \
 119                 "run loaduimage;" \
 120                 "if run loaddtb; then " \
 121                         "bootm 0x40007FC0 - ${fdtaddr};" \
 122                 "fi;" \
 123                 "bootm 0x40007FC0;\0" \
 124         "updatemmc=" \
 125                 "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
 126                 "mmc boot 0 1 1 0\0" \
 127         "updatebackup=" \
 128                 "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
 129                 "mmc boot 0 1 1 0\0" \
 130         "updatebootb=" \
 131                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
 132         "lpj=lpj=3981312\0" \
 133         "nfsboot=" \
 134                 "setenv bootargs root=/dev/nfs rw " \
 135                 "nfsroot=${nfsroot},nolock,tcp " \
 136                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
 137                 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
 138                 "; run bootk\0" \
 139         "ramfsboot=" \
 140                 "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \
 141                 "${console} ${meminfo} " \
 142                 "initrd=0x43000000,8M ramdisk=8192\0" \
 143         "mmcboot=" \
 144                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 145                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 146                 "run bootk\0" \
 147         "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
 148         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 149         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
 150         "verify=n\0" \
 151         "rootfstype=ext4\0" \
 152         "console=" CONFIG_DEFAULT_CONSOLE \
 153         "meminfo=crashkernel=32M@0x50000000\0" \
 154         "nfsroot=/nfsroot/arm\0" \
 155         "bootblock=" CONFIG_BOOTBLOCK "\0" \
 156         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
 157         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 158                 "${fdtfile}\0" \
 159         "mmcdev=0\0" \
 160         "mmcbootpart=2\0" \
 161         "mmcrootpart=5\0" \
 162         "opts=always_resume=1\0" \
 163         "partitions=" PARTS_DEFAULT \
 164         "dfu_alt_info=" CONFIG_DFU_ALT \
 165         "spladdr=0x40000100\0" \
 166         "splsize=0x200\0" \
 167         "splfile=falcon.bin\0" \
 168         "spl_export=" \
 169                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 170                    "setenv spl_imgsize 0x${spl_imgsize};" \
 171                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 172                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 173                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 174                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 175                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 176                    "spl export atags 0x40007FC0;" \
 177                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 178                    "mw.l ${spl_addr_tmp} ${splsize};" \
 179                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 180                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 181                    "setenv spl_imgsize;" \
 182                    "setenv spl_imgaddr;" \
 183                    "setenv spl_addr_tmp;\0" \
 184         "fdtaddr=40800000\0" \
 185
 186 /* Falcon mode definitions */
 187 #define CONFIG_CMD_SPL
 188 #define CONFIG_SYS_SPL_ARGS_ADDR        CONFIG_SYS_SDRAM_BASE + 0x100
 189
 190 /* GPT */
 191 #define CONFIG_RANDOM_UUID
 192
 193 /* I2C */
 194 #include <asm/arch/gpio.h>
 195
 196 #define CONFIG_CMD_I2C
 197
 198 #define CONFIG_SYS_I2C
 199 #define CONFIG_SYS_I2C_S3C24X0
 200 #define CONFIG_SYS_I2C_S3C24X0_SPEED    100000
 201 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0xFE
 202 #define CONFIG_MAX_I2C_NUM              8
 203 #define CONFIG_SYS_I2C_SOFT             /* I2C bit-banged */
 204 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 205 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x7F
 206 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 207 #define CONFIG_SYS_I2C_INIT_BOARD
 208
 209 /* I2C FG */
 210 #define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1)
 211 #define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0)
 212
 213 /* POWER */
 214 #define CONFIG_POWER
 215 #define CONFIG_POWER_I2C
 216 #define CONFIG_POWER_MAX8997
 217
 218 #define CONFIG_POWER_FG
 219 #define CONFIG_POWER_FG_MAX17042
 220 #define CONFIG_POWER_MUIC
 221 #define CONFIG_POWER_MUIC_MAX8997
 222 #define CONFIG_POWER_BATTERY
 223 #define CONFIG_POWER_BATTERY_TRATS
 224
 225 /* Security subsystem - enable hw_rand() */
 226 #define CONFIG_EXYNOS_ACE_SHA
 227 #define CONFIG_LIB_HW_RAND
 228
 229 /* Common misc for Samsung */
 230 #define CONFIG_MISC_COMMON
 231
 232 #define CONFIG_MISC_INIT_R
 233
 234 /* Download menu - Samsung common */
 235 #define CONFIG_LCD_MENU
 236 #define CONFIG_LCD_MENU_BOARD
 237
 238 /* Download menu - definitions for check keys */
 239 #ifndef __ASSEMBLY__
 240 #include <power/max8997_pmic.h>
 241
 242 #define KEY_PWR_PMIC_NAME               "MAX8997_PMIC"
 243 #define KEY_PWR_STATUS_REG              MAX8997_REG_STATUS1
 244 #define KEY_PWR_STATUS_MASK             (1 << 0)
 245 #define KEY_PWR_INTERRUPT_REG           MAX8997_REG_INT1
 246 #define KEY_PWR_INTERRUPT_MASK          (1 << 0)
 247
 248 #define KEY_VOL_UP_GPIO                 exynos4_gpio_get(2, x2, 0)
 249 #define KEY_VOL_DOWN_GPIO               exynos4_gpio_get(2, x2, 1)
 250 #endif /* __ASSEMBLY__ */
 251
 252 /* LCD console */
 253 #define LCD_BPP                 LCD_COLOR16
 254 #define CONFIG_SYS_WHITE_ON_BLACK
 255
 256 /* LCD */
 257 #define CONFIG_EXYNOS_FB
 258 #define CONFIG_LCD
 259 #define CONFIG_CMD_BMP
 260 #define CONFIG_BMP_16BPP
 261 #define CONFIG_FB_ADDR          0x52504000
 262 #define CONFIG_S6E8AX0
 263 #define CONFIG_EXYNOS_MIPI_DSIM
 264 #define CONFIG_VIDEO_BMP_GZIP
 265 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  ((500 * 160 * 4) + 54)
 266
 267 #define LCD_XRES        720
 268 #define LCD_YRES        1280
 269
 270 #endif  /* __CONFIG_H */