1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
5 * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
11 #include <linux/kconfig.h>
12 #include <linux/stringify.h>
15 /* #if defined(CONFIG_SPL_BUILD) */
16 /* common IMX6 SPL configuration */
21 /* place code in last 4 MiB of RAM */
23 #include "mx6_common.h"
25 #if defined(CONFIG_TQMA6S)
26 #define PHYS_SDRAM_SIZE (512u * SZ_1M)
27 #elif defined(CONFIG_TQMA6DL)
28 #define PHYS_SDRAM_SIZE (SZ_1G)
29 #elif defined(CONFIG_TQMA6Q)
30 #define PHYS_SDRAM_SIZE (SZ_1G)
35 #define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
38 #define CONFIG_I2C_MULTI_BUS
40 /* I2C EEPROM (M24C64) */
41 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */
42 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20
44 #if !defined(CONFIG_DM_PMIC)
45 #define CONFIG_POWER_PFUZE100
46 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
47 #define TQMA6_PFUZE100_I2C_BUS 2
51 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
54 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
55 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
56 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
58 #define IMX_FEC_BASE ENET_BASE_ADDR
60 #define CONFIG_ARP_TIMEOUT 200UL
62 #if defined(CONFIG_TQMA6X_MMC_BOOT)
64 #define TQMA6_UBOOT_OFFSET SZ_1K
65 #define TQMA6_UBOOT_SECTOR_START 0x2
66 #define TQMA6_UBOOT_SECTOR_COUNT 0x7fe
68 #define TQMA6_FDT_OFFSET (2 * SZ_1M)
69 #define TQMA6_FDT_SECTOR_START 0x1000
70 #define TQMA6_FDT_SECTOR_COUNT 0x800
72 #define TQMA6_KERNEL_SECTOR_START 0x2000
73 #define TQMA6_KERNEL_SECTOR_COUNT 0x2000
75 #define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
76 "uboot_start="__stringify(TQMA6_UBOOT_SECTOR_START)"\0" \
77 "uboot_size="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
78 "fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
79 "fdt_size="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
80 "kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
81 "kernel_size="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
82 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
83 "loadimage=mmc dev ${mmcdev}; " \
84 "mmc read ${loadaddr} ${kernel_start} ${kernel_size};\0" \
85 "loadfdt=mmc dev ${mmcdev}; " \
86 "mmc read ${fdt_addr} ${fdt_start} ${fdt_size};\0" \
87 "update_uboot=if tftp ${uboot}; then " \
88 "if itest ${filesize} > 0; then " \
89 "mmc dev ${mmcdev}; mmc rescan; " \
90 "setexpr blkc ${filesize} + 0x1ff; " \
91 "setexpr blkc ${blkc} / 0x200; " \
92 "if itest ${blkc} <= ${uboot_size}; then " \
93 "mmc write ${loadaddr} ${uboot_start} " \
97 "setenv filesize; setenv blkc \0" \
98 "update_kernel=run kernel_name; " \
99 "if tftp ${kernel}; then " \
100 "if itest ${filesize} > 0; then " \
101 "mmc dev ${mmcdev}; mmc rescan; " \
102 "setexpr blkc ${filesize} + 0x1ff; " \
103 "setexpr blkc ${blkc} / 0x200; " \
104 "if itest ${blkc} <= ${kernel_size}; then " \
105 "mmc write ${loadaddr} " \
106 "${kernel_start} ${blkc}; " \
110 "setenv filesize; setenv blkc \0" \
111 "update_fdt=if tftp ${fdt_file}; then " \
112 "if itest ${filesize} > 0; then " \
113 "mmc dev ${mmcdev}; mmc rescan; " \
114 "setexpr blkc ${filesize} + 0x1ff; " \
115 "setexpr blkc ${blkc} / 0x200; " \
116 "if itest ${blkc} <= ${fdt_size}; then " \
117 "mmc write ${loadaddr} ${fdt_start} ${blkc}; " \
120 "setenv filesize; setenv blkc \0" \
122 #define CONFIG_BOOTCOMMAND \
123 "run mmcboot; run netboot; run panicboot"
125 #elif defined(CONFIG_TQMA6X_SPI_BOOT)
127 #define TQMA6_UBOOT_OFFSET 0x400
128 #define TQMA6_UBOOT_SECTOR_START 0x0
129 /* max u-boot size: 512k */
130 #define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
131 #define TQMA6_UBOOT_SECTOR_COUNT 0x8
132 #define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \
133 TQMA6_UBOOT_SECTOR_COUNT)
135 #define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \
136 CONFIG_ENV_SECT_SIZE)
137 #define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE)
139 #define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */
140 #define TQMA6_FDT_SECTOR_COUNT 0x01
142 #define TQMA6_KERNEL_SECTOR_START 0x10
143 #define TQMA6_KERNEL_SECTOR_COUNT 0x60
145 #define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
147 "uboot_offset="__stringify(TQMA6_UBOOT_OFFSET)"\0" \
148 "uboot_sectors="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
149 "fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
150 "fdt_sectors="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
151 "kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
152 "kernel_sectors="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
153 "update_uboot=if tftp ${uboot}; then " \
154 "if itest ${filesize} > 0; then " \
155 "setexpr blkc ${filesize} + " \
156 __stringify(TQMA6_UBOOT_OFFSET) "; " \
157 "setexpr size ${uboot_sectors} * " \
158 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
159 "if itest ${blkc} <= ${size}; then " \
161 "sf erase 0 ${size}; " \
162 "sf write ${loadaddr} ${uboot_offset} " \
166 "setenv filesize 0; setenv blkc; setenv size \0" \
167 "update_kernel=run kernel_name; if tftp ${kernel}; then " \
168 "if itest ${filesize} > 0; then " \
169 "setexpr size ${kernel_sectors} * " \
170 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
171 "setexpr offset ${kernel_start} * " \
172 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
173 "if itest ${filesize} <= ${size}; then " \
175 "sf erase ${offset} ${size}; " \
176 "sf write ${loadaddr} ${offset} " \
180 "setenv filesize 0; setenv size ; setenv offset\0" \
181 "update_fdt=if tftp ${fdt_file}; then " \
182 "if itest ${filesize} > 0; then " \
183 "setexpr size ${fdt_sectors} * " \
184 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
185 "setexpr offset ${fdt_start} * " \
186 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
187 "if itest ${filesize} <= ${size}; then " \
189 "sf erase ${offset} ${size}; " \
190 "sf write ${loadaddr} ${offset} " \
194 "setenv filesize 0; setenv size ; setenv offset\0" \
195 "loadimage=sf probe; " \
196 "setexpr size ${kernel_sectors} * " \
197 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
198 "setexpr offset ${kernel_start} * " \
199 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
200 "sf read ${loadaddr} ${offset} ${size}; " \
201 "setenv size ; setenv offset\0" \
202 "loadfdt=sf probe; " \
203 "setexpr size ${fdt_sectors} * " \
204 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
205 "setexpr offset ${fdt_start} * " \
206 __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
207 "sf read ${fdt_addr} ${offset} ${size}; " \
208 "setenv size ; setenv offset\0" \
210 #define CONFIG_BOOTCOMMAND \
211 "sf probe; run mmcboot; run netboot; run panicboot" \
215 #error "need to define boot source"
219 /* 128 MiB offset as in ARM related docu for linux suggested */
220 #define TQMA6_FDT_ADDRESS 0x18000000
222 /* set to a resonable value, changeable by user */
223 #define TQMA6_CMA_SIZE 160M
225 #define CONFIG_EXTRA_ENV_SETTINGS \
229 "boot_type=bootz\0" \
230 "kernel_name=if test \"${boot_type}\" != bootz; then " \
231 "setenv kernel ${uimage}; " \
232 "else setenv kernel ${zimage}; fi\0" \
233 "uboot=u-boot.imx\0" \
234 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
235 "fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \
236 "console=" CONSOLE_DEV "\0" \
237 "cma_size="__stringify(TQMA6_CMA_SIZE)"\0" \
238 "fdt_high=0xffffffff\0" \
239 "initrd_high=0xffffffff\0" \
241 "addcma=setenv bootargs ${bootargs} cma=${cma_size}\0" \
242 "addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
243 "addfb=setenv bootargs ${bootargs} " \
244 "imx-fbdev.legacyfb_depth=32 consoleblank=0\0" \
247 "mmcargs=run addmmc addtty addfb addcma\0" \
248 "addmmc=setenv bootargs ${bootargs} " \
249 "root=/dev/mmcblk${mmcblkdev}p${mmcpart} ${rootfsmode} " \
251 "mmcboot=echo Booting from mmc ...; " \
252 "setenv bootargs; " \
255 "if run loadfdt; then " \
256 "echo boot device tree kernel ...; " \
257 "${boot_type} ${loadaddr} - ${fdt_addr}; " \
261 "setenv bootargs \0" \
263 "rootpath=/srv/nfs/tqma6\0" \
265 "netargs=run addnfs addip addtty addfb addcma\0" \
266 "addnfs=setenv bootargs ${bootargs} " \
267 "root=/dev/nfs rw " \
268 "nfsroot=${serverip}:${rootpath},v3,tcp;\0" \
269 "addip_static=setenv bootargs ${bootargs} " \
270 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
271 "${hostname}:${netdev}:off\0" \
272 "addip_dynamic=setenv bootargs ${bootargs} ip=dhcp\0" \
273 "addip=if test \"${ipmode}\" != static; then " \
274 "run addip_dynamic; else run addip_static; fi\0" \
275 "set_getcmd=if test \"${ipmode}\" != static; then " \
276 "setenv getcmd dhcp; setenv autoload yes; " \
277 "else setenv getcmd tftp; setenv autoload no; fi\0" \
278 "netboot=echo Booting from net ...; " \
279 "run kernel_name; " \
281 "setenv bootargs; " \
283 "if ${getcmd} ${kernel}; then " \
284 "if ${getcmd} ${fdt_addr} ${fdt_file}; then " \
285 "${boot_type} ${loadaddr} - ${fdt_addr}; " \
288 "echo ... failed\0" \
289 "panicboot=echo No boot device !!! reset\0" \
290 TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
292 /* Physical Memory Map */
293 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
295 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
296 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
297 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
299 #define CONFIG_SYS_INIT_SP_OFFSET \
300 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
301 #define CONFIG_SYS_INIT_SP_ADDR \
302 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
305 * All the defines above are for the TQMa6 SoM
307 * Now include the baseboard specific configuration
310 #include "tqma6_mba6.h"
312 #include "tqma6_wru4.h"
314 #error "No baseboard for the TQMa6 defined!"
317 /* Support at least the sensor on TQMa6 SOM */
319 #endif /* __CONFIG_H */