include/configs/titanium.h

   1 /*
   2  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
   3  *
   4  * Configuration settings for the ProjectionDesign / Barco
   5  * Titanium board.
   6  *
   7  * Based on mx6qsabrelite.h which is:
   8  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18  * GNU General Public License for more details.
  19  */
  20
  21 #ifndef __CONFIG_H
  22 #define __CONFIG_H
  23
  24 #include <asm/arch/imx-regs.h>
  25 #include <asm/imx-common/gpio.h>
  26
  27 #define CONFIG_MX6
  28 #define CONFIG_MX6Q
  29 #define CONFIG_DISPLAY_CPUINFO
  30 #define CONFIG_DISPLAY_BOARDINFO
  31
  32 #define MACH_TYPE_TITANIUM              3769
  33 #define CONFIG_MACH_TYPE                MACH_TYPE_TITANIUM
  34
  35 #define CONFIG_CMDLINE_TAG
  36 #define CONFIG_SETUP_MEMORY_TAGS
  37 #define CONFIG_INITRD_TAG
  38 #define CONFIG_REVISION_TAG
  39
  40 /* Size of malloc() pool */
  41 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
  42
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_MISC_INIT_R
  45 #define CONFIG_MXC_GPIO
  46
  47 #define CONFIG_MXC_UART
  48 #define CONFIG_MXC_UART_BASE            UART1_BASE
  49
  50 /* I2C Configs */
  51 #define CONFIG_CMD_I2C
  52 #define CONFIG_I2C_MULTI_BUS
  53 #define CONFIG_I2C_MXC
  54 #define CONFIG_SYS_I2C_SPEED            100000
  55
  56 /* MMC Configs */
  57 #define CONFIG_FSL_ESDHC
  58 #define CONFIG_FSL_USDHC
  59 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  60 #define CONFIG_SYS_FSL_USDHC_NUM        1
  61
  62 #define CONFIG_MMC
  63 #define CONFIG_CMD_MMC
  64 #define CONFIG_GENERIC_MMC
  65 #define CONFIG_BOUNCE_BUFFER
  66 #define CONFIG_CMD_EXT2
  67 #define CONFIG_CMD_FAT
  68 #define CONFIG_DOS_PARTITION
  69
  70 #define CONFIG_CMD_PING
  71 #define CONFIG_CMD_DHCP
  72 #define CONFIG_CMD_MII
  73 #define CONFIG_CMD_NET
  74 #define CONFIG_FEC_MXC
  75 #define CONFIG_MII
  76 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  77 #define CONFIG_FEC_XCV_TYPE             RGMII
  78 #define CONFIG_FEC_MXC_PHYADDR          4
  79 #define CONFIG_PHYLIB
  80 #define CONFIG_PHY_MICREL
  81 #define CONFIG_PHY_MICREL_KSZ9021
  82
  83 /* USB Configs */
  84 #define CONFIG_CMD_USB
  85 #define CONFIG_CMD_FAT
  86 #define CONFIG_USB_EHCI
  87 #define CONFIG_USB_EHCI_MX6
  88 #define CONFIG_USB_STORAGE
  89 #define CONFIG_MXC_USB_PORT     1
  90 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  91 #define CONFIG_MXC_USB_FLAGS    0
  92
  93 /* Miscellaneous commands */
  94 #define CONFIG_CMD_BMODE
  95
  96 /* allow to overwrite serial and ethaddr */
  97 #define CONFIG_ENV_OVERWRITE
  98 #define CONFIG_CONS_INDEX               1
  99 #define CONFIG_BAUDRATE                 115200
 100
 101 /* Command definition */
 102 #include <config_cmd_default.h>
 103
 104 #undef CONFIG_CMD_IMLS
 105
 106 #define CONFIG_BOOTDELAY                3
 107
 108 #define CONFIG_LOADADDR                 0x12000000
 109 #define CONFIG_SYS_TEXT_BASE            0x17800000
 110
 111 #define CONFIG_SYS_MEMTEST_START        0x10000000
 112 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (500 << 20))
 113
 114 #define CONFIG_HOSTNAME                 titanium
 115 #define CONFIG_UBI_PART                 ubi
 116 #define CONFIG_UBIFS_VOLUME             rootfs0
 117
 118 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
 119 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
 120                                 "512k(env2),-(ubi)"
 121
 122 #define CONFIG_EXTRA_ENV_SETTINGS \
 123         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
 124         "kernel_fs=/boot/uImage\0"                                      \
 125         "kernel_addr=11000000\0"                                        \
 126         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
 127                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 128         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
 129         "dtb_addr=12800000\0"                                           \
 130         "script=boot.scr\0" \
 131         "uimage=uImage\0" \
 132         "console=ttymxc0\0" \
 133         "baudrate=115200\0" \
 134         "fdt_high=0xffffffff\0"   \
 135         "initrd_high=0xffffffff\0" \
 136         "mmcdev=0\0" \
 137         "mmcpart=1\0" \
 138         "uimage=uImage\0" \
 139         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
 140                 " ${script}\0" \
 141         "bootscript=echo Running bootscript from mmc ...; source\0" \
 142         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 143         "mmcroot=/dev/mmcblk0p2\0" \
 144         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 145                 "root=${mmcroot} rootwait rw\0" \
 146         "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
 147                 " ${uimage}; bootm\0" \
 148         "addip=setenv bootargs ${bootargs} "                            \
 149                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 150                 ":${hostname}:${netdev}:off panic=1\0"                  \
 151         "addcon=setenv bootargs ${bootargs} console=ttymxc0,"           \
 152                 "${baudrate}\0"                                         \
 153         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 154         "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"       \
 155         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 156                 "nfsroot=${serverip}:${rootpath}\0"                     \
 157         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
 158         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
 159         "boot_vol=0\0"                                                  \
 160         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
 161         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
 162         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
 163                 " ${filesize}\0"                                        \
 164         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
 165         "init_ubi=nand erase.part ubi;ubi part ${part};"                \
 166                 "ubi create ${vol} c800000\0"                           \
 167         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 168         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 169         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
 170                 " addcon addmtd;"                                       \
 171                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 172         "ubifsargs=set bootargs ubi.mtd=ubi "                           \
 173                 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"         \
 174         "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"   \
 175         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
 176                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
 177         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
 178                 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"           \
 179         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
 180         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
 181         "net_nfs=run load_dtb load_kernel; "                            \
 182                 "run nfsargs addip addcon addmtd;"                      \
 183                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 184         "delenv=env default -a -f; saveenv; reset\0"
 185
 186 #define CONFIG_BOOTCOMMAND              "run nand_ubifs"
 187
 188 /* Miscellaneous configurable options */
 189 #define CONFIG_SYS_LONGHELP
 190 #define CONFIG_SYS_HUSH_PARSER
 191 #define CONFIG_SYS_PROMPT               "Titanium > "
 192 #define CONFIG_AUTO_COMPLETE
 193 #define CONFIG_CMDLINE_EDITING
 194 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
 195
 196 #define CONFIG_SYS_CBSIZE               256
 197
 198 /* Print Buffer Size */
 199 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 200                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 201 #define CONFIG_SYS_MAXARGS              16
 202 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 203
 204 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 205 #define CONFIG_SYS_HZ                   1000
 206
 207 /* Physical Memory Map */
 208 #define CONFIG_NR_DRAM_BANKS            1
 209 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 210 #define PHYS_SDRAM_SIZE                 (512 << 20)
 211
 212 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 213 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 214 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 215
 216 #define CONFIG_SYS_INIT_SP_OFFSET \
 217         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 218 #define CONFIG_SYS_INIT_SP_ADDR \
 219         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 220
 221 /* FLASH and environment organization */
 222 #define CONFIG_SYS_NO_FLASH
 223
 224 /* Enable NAND support */
 225 #define CONFIG_CMD_NAND
 226 #define CONFIG_CMD_NAND_TRIMFFS
 227 #define CONFIG_CMD_TIME
 228
 229 #ifdef CONFIG_CMD_NAND
 230
 231 /* NAND stuff */
 232 #define CONFIG_NAND_MXS
 233 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 234 #define CONFIG_SYS_NAND_BASE            0x40000000
 235 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 236 #define CONFIG_SYS_NAND_ONFI_DETECTION
 237
 238 /* DMA stuff, needed for GPMI/MXS NAND support */
 239 #define CONFIG_APBH_DMA
 240 #define CONFIG_APBH_DMA_BURST
 241 #define CONFIG_APBH_DMA_BURST8
 242
 243 /* Environment in NAND */
 244 #define CONFIG_ENV_IS_IN_NAND
 245 #define CONFIG_ENV_OFFSET               (16 << 20)
 246 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
 247 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 248 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + (512 << 10))
 249 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 250
 251 #else /* CONFIG_CMD_NAND */
 252
 253 /* Environment in MMC */
 254 #define CONFIG_ENV_SIZE                 (8 << 10)
 255 #define CONFIG_ENV_IS_IN_MMC
 256 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 257 #define CONFIG_SYS_MMC_ENV_DEV          0
 258
 259 #endif /* CONFIG_CMD_NAND */
 260
 261 /* UBI/UBIFS config options */
 262 #define CONFIG_LZO
 263 #define CONFIG_MTD_DEVICE
 264 #define CONFIG_MTD_PARTITIONS
 265 #define CONFIG_RBTREE
 266 #define CONFIG_CMD_MTDPARTS
 267 #define CONFIG_CMD_UBI
 268 #define CONFIG_CMD_UBIFS
 269
 270 #define CONFIG_OF_LIBFDT
 271 #define CONFIG_CMD_BOOTZ
 272
 273 #ifndef CONFIG_SYS_DCACHE_OFF
 274 #define CONFIG_CMD_CACHE
 275 #endif
 276
 277 #endif                         /* __CONFIG_H */