Merge git://git.denx.de/u-boot-fsl-qoriq
[platform/kernel/u-boot.git] / include / configs / titanium.h
1 /*
2  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
3  *
4  * Configuration settings for the ProjectionDesign / Barco
5  * Titanium board.
6  *
7  * Based on mx6qsabrelite.h which is:
8  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_H
14 #define __CONFIG_H
15
16 #include "mx6_common.h"
17
18 #define CONFIG_MX6Q
19
20 /* Provide the MACH_TYPE value that the vendor kernel requires. */
21 #define CONFIG_MACH_TYPE                3769
22
23 /* Size of malloc() pool */
24 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
25
26 #define CONFIG_MISC_INIT_R
27
28 #define CONFIG_MXC_UART
29 #define CONFIG_MXC_UART_BASE            UART1_BASE
30
31 /* I2C Configs */
32 #define CONFIG_SYS_I2C
33 #define CONFIG_SYS_I2C_MXC
34 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
35 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
36 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
37 #define CONFIG_SYS_I2C_SPEED            100000
38
39 /* MMC Configs */
40 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
41 #define CONFIG_SYS_FSL_USDHC_NUM        1
42
43 #define CONFIG_FEC_MXC
44 #define CONFIG_MII
45 #define IMX_FEC_BASE                    ENET_BASE_ADDR
46 #define CONFIG_FEC_XCV_TYPE             RGMII
47 #define CONFIG_FEC_MXC_PHYADDR          4
48 #define CONFIG_PHYLIB
49 #define CONFIG_PHY_MICREL
50 #define CONFIG_PHY_MICREL_KSZ9021
51
52 /* USB Configs */
53 #define CONFIG_MXC_USB_PORT     1
54 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
55 #define CONFIG_MXC_USB_FLAGS    0
56
57 #define CONFIG_SYS_MEMTEST_START        0x10000000
58 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (500 << 20))
59
60 #define CONFIG_HOSTNAME                 titanium
61 #define CONFIG_UBI_PART                 ubi
62 #define CONFIG_UBIFS_VOLUME             rootfs0
63
64 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
65 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
66                                 "512k(env2),-(ubi)"
67
68 #define CONFIG_EXTRA_ENV_SETTINGS \
69         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
70         "kernel_fs=/boot/uImage\0"                                      \
71         "kernel_addr=11000000\0"                                        \
72         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
73                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
74         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
75         "dtb_addr=12800000\0"                                           \
76         "script=boot.scr\0" \
77         "uimage=uImage\0" \
78         "console=ttymxc0\0" \
79         "baudrate=115200\0" \
80         "fdt_high=0xffffffff\0"   \
81         "initrd_high=0xffffffff\0" \
82         "mmcdev=0\0" \
83         "mmcpart=1\0" \
84         "uimage=uImage\0" \
85         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
86                 " ${script}\0" \
87         "bootscript=echo Running bootscript from mmc ...; source\0" \
88         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
89         "mmcroot=/dev/mmcblk0p2\0" \
90         "mmcargs=setenv bootargs console=${console},${baudrate} " \
91                 "root=${mmcroot} rootwait rw\0" \
92         "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
93                 " ${uimage}; bootm\0" \
94         "addip=setenv bootargs ${bootargs} "                            \
95                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
96                 ":${hostname}:${netdev}:off panic=1\0"                  \
97         "addcon=setenv bootargs ${bootargs} console=ttymxc0,"           \
98                 "${baudrate}\0"                                         \
99         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
100         "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"       \
101         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
102                 "nfsroot=${serverip}:${rootpath}\0"                     \
103         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
104         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
105         "boot_vol=0\0"                                                  \
106         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
107         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
108         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
109                 " ${filesize}\0"                                        \
110         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
111         "init_ubi=nand erase.part ubi;ubi part ${part};"                \
112                 "ubi create ${vol} c800000\0"                           \
113         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
114         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
115         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
116                 " addcon addmtd;"                                       \
117                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
118         "ubifsargs=set bootargs ubi.mtd=ubi "                           \
119                 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"         \
120         "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"   \
121         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
122                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
123         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
124                 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"           \
125         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
126         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
127         "net_nfs=run load_dtb load_kernel; "                            \
128                 "run nfsargs addip addcon addmtd;"                      \
129                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
130         "delenv=env default -a -f; saveenv; reset\0"
131
132 #define CONFIG_BOOTCOMMAND              "run nand_ubifs"
133
134 /* Print Buffer Size */
135 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
136                                          sizeof(CONFIG_SYS_PROMPT) + 16)
137
138 /* Physical Memory Map */
139 #define CONFIG_NR_DRAM_BANKS            1
140 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
141 #define PHYS_SDRAM_SIZE                 (512 << 20)
142
143 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
144 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
145 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
146
147 #define CONFIG_SYS_INIT_SP_OFFSET \
148         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
149 #define CONFIG_SYS_INIT_SP_ADDR \
150         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
151
152 /* Enable NAND support */
153 #define CONFIG_CMD_NAND
154 #define CONFIG_CMD_NAND_TRIMFFS
155
156 #ifdef CONFIG_CMD_NAND
157
158 /* NAND stuff */
159 #define CONFIG_NAND_MXS
160 #define CONFIG_SYS_MAX_NAND_DEVICE      1
161 #define CONFIG_SYS_NAND_BASE            0x40000000
162 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
163 #define CONFIG_SYS_NAND_ONFI_DETECTION
164
165 /* DMA stuff, needed for GPMI/MXS NAND support */
166 #define CONFIG_APBH_DMA
167 #define CONFIG_APBH_DMA_BURST
168 #define CONFIG_APBH_DMA_BURST8
169
170 /* Environment in NAND */
171 #define CONFIG_ENV_IS_IN_NAND
172 #define CONFIG_ENV_OFFSET               (16 << 20)
173 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
174 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
175 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + (512 << 10))
176 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
177
178 #else /* CONFIG_CMD_NAND */
179
180 /* Environment in MMC */
181 #define CONFIG_ENV_SIZE                 (8 << 10)
182 #define CONFIG_ENV_IS_IN_MMC
183 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
184 #define CONFIG_SYS_MMC_ENV_DEV          0
185
186 #endif /* CONFIG_CMD_NAND */
187
188 /* UBI/UBIFS config options */
189 #define CONFIG_LZO
190 #define CONFIG_MTD_DEVICE
191 #define CONFIG_MTD_PARTITIONS
192 #define CONFIG_RBTREE
193 #define CONFIG_CMD_MTDPARTS
194 #define CONFIG_CMD_UBIFS
195
196 #endif                         /* __CONFIG_H */