320d76cac607292e05e35ead46409101fb7ff5de
[platform/kernel/u-boot.git] / include / configs / titanium.h
1 /*
2  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
3  *
4  * Configuration settings for the ProjectionDesign / Barco
5  * Titanium board.
6  *
7  * Based on mx6qsabrelite.h which is:
8  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_H
14 #define __CONFIG_H
15
16 #include "mx6_common.h"
17 #include <asm/arch/imx-regs.h>
18 #include <asm/imx-common/gpio.h>
19
20 #define CONFIG_MX6
21 #define CONFIG_MX6Q
22 #define CONFIG_DISPLAY_CPUINFO
23 #define CONFIG_DISPLAY_BOARDINFO
24
25 #define MACH_TYPE_TITANIUM              3769
26 #define CONFIG_MACH_TYPE                MACH_TYPE_TITANIUM
27
28 #define CONFIG_CMDLINE_TAG
29 #define CONFIG_SETUP_MEMORY_TAGS
30 #define CONFIG_INITRD_TAG
31 #define CONFIG_REVISION_TAG
32
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
35
36 #define CONFIG_BOARD_EARLY_INIT_F
37 #define CONFIG_MISC_INIT_R
38 #define CONFIG_MXC_GPIO
39
40 #define CONFIG_MXC_UART
41 #define CONFIG_MXC_UART_BASE            UART1_BASE
42
43 /* I2C Configs */
44 #define CONFIG_CMD_I2C
45 #define CONFIG_SYS_I2C
46 #define CONFIG_SYS_I2C_MXC
47 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
48 #define CONFIG_SYS_I2C_SPEED            100000
49
50 /* MMC Configs */
51 #define CONFIG_FSL_ESDHC
52 #define CONFIG_FSL_USDHC
53 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
54 #define CONFIG_SYS_FSL_USDHC_NUM        1
55
56 #define CONFIG_MMC
57 #define CONFIG_CMD_MMC
58 #define CONFIG_GENERIC_MMC
59 #define CONFIG_BOUNCE_BUFFER
60 #define CONFIG_CMD_EXT2
61 #define CONFIG_CMD_FAT
62 #define CONFIG_DOS_PARTITION
63
64 #define CONFIG_CMD_PING
65 #define CONFIG_CMD_DHCP
66 #define CONFIG_CMD_MII
67 #define CONFIG_CMD_NET
68 #define CONFIG_FEC_MXC
69 #define CONFIG_MII
70 #define IMX_FEC_BASE                    ENET_BASE_ADDR
71 #define CONFIG_FEC_XCV_TYPE             RGMII
72 #define CONFIG_FEC_MXC_PHYADDR          4
73 #define CONFIG_PHYLIB
74 #define CONFIG_PHY_MICREL
75 #define CONFIG_PHY_MICREL_KSZ9021
76
77 /* USB Configs */
78 #define CONFIG_CMD_USB
79 #define CONFIG_CMD_FAT
80 #define CONFIG_USB_EHCI
81 #define CONFIG_USB_EHCI_MX6
82 #define CONFIG_USB_STORAGE
83 #define CONFIG_MXC_USB_PORT     1
84 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
85 #define CONFIG_MXC_USB_FLAGS    0
86
87 /* Miscellaneous commands */
88 #define CONFIG_CMD_BMODE
89
90 /* allow to overwrite serial and ethaddr */
91 #define CONFIG_ENV_OVERWRITE
92 #define CONFIG_CONS_INDEX               1
93 #define CONFIG_BAUDRATE                 115200
94
95 /* Command definition */
96 #include <config_cmd_default.h>
97
98 #undef CONFIG_CMD_IMLS
99
100 #define CONFIG_BOOTDELAY                3
101
102 #define CONFIG_LOADADDR                 0x12000000
103 #define CONFIG_SYS_TEXT_BASE            0x17800000
104
105 #define CONFIG_SYS_MEMTEST_START        0x10000000
106 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (500 << 20))
107
108 #define CONFIG_HOSTNAME                 titanium
109 #define CONFIG_UBI_PART                 ubi
110 #define CONFIG_UBIFS_VOLUME             rootfs0
111
112 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
113 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
114                                 "512k(env2),-(ubi)"
115
116 #define CONFIG_EXTRA_ENV_SETTINGS \
117         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
118         "kernel_fs=/boot/uImage\0"                                      \
119         "kernel_addr=11000000\0"                                        \
120         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
121                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
122         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
123         "dtb_addr=12800000\0"                                           \
124         "script=boot.scr\0" \
125         "uimage=uImage\0" \
126         "console=ttymxc0\0" \
127         "baudrate=115200\0" \
128         "fdt_high=0xffffffff\0"   \
129         "initrd_high=0xffffffff\0" \
130         "mmcdev=0\0" \
131         "mmcpart=1\0" \
132         "uimage=uImage\0" \
133         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
134                 " ${script}\0" \
135         "bootscript=echo Running bootscript from mmc ...; source\0" \
136         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
137         "mmcroot=/dev/mmcblk0p2\0" \
138         "mmcargs=setenv bootargs console=${console},${baudrate} " \
139                 "root=${mmcroot} rootwait rw\0" \
140         "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
141                 " ${uimage}; bootm\0" \
142         "addip=setenv bootargs ${bootargs} "                            \
143                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
144                 ":${hostname}:${netdev}:off panic=1\0"                  \
145         "addcon=setenv bootargs ${bootargs} console=ttymxc0,"           \
146                 "${baudrate}\0"                                         \
147         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
148         "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"       \
149         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
150                 "nfsroot=${serverip}:${rootpath}\0"                     \
151         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
152         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
153         "boot_vol=0\0"                                                  \
154         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
155         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
156         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
157                 " ${filesize}\0"                                        \
158         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
159         "init_ubi=nand erase.part ubi;ubi part ${part};"                \
160                 "ubi create ${vol} c800000\0"                           \
161         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
162         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
163         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
164                 " addcon addmtd;"                                       \
165                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
166         "ubifsargs=set bootargs ubi.mtd=ubi "                           \
167                 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"         \
168         "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"   \
169         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
170                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
171         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
172                 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"           \
173         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
174         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
175         "net_nfs=run load_dtb load_kernel; "                            \
176                 "run nfsargs addip addcon addmtd;"                      \
177                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
178         "delenv=env default -a -f; saveenv; reset\0"
179
180 #define CONFIG_BOOTCOMMAND              "run nand_ubifs"
181
182 /* Miscellaneous configurable options */
183 #define CONFIG_SYS_LONGHELP
184 #define CONFIG_SYS_HUSH_PARSER
185 #define CONFIG_SYS_PROMPT               "Titanium > "
186 #define CONFIG_AUTO_COMPLETE
187 #define CONFIG_CMDLINE_EDITING
188 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
189
190 #define CONFIG_SYS_CBSIZE               256
191
192 /* Print Buffer Size */
193 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
194                                          sizeof(CONFIG_SYS_PROMPT) + 16)
195 #define CONFIG_SYS_MAXARGS              16
196 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
197
198 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
199
200 /* Physical Memory Map */
201 #define CONFIG_NR_DRAM_BANKS            1
202 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
203 #define PHYS_SDRAM_SIZE                 (512 << 20)
204
205 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
206 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
207 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
208
209 #define CONFIG_SYS_INIT_SP_OFFSET \
210         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
211 #define CONFIG_SYS_INIT_SP_ADDR \
212         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
213
214 /* FLASH and environment organization */
215 #define CONFIG_SYS_NO_FLASH
216
217 /* Enable NAND support */
218 #define CONFIG_CMD_NAND
219 #define CONFIG_CMD_NAND_TRIMFFS
220 #define CONFIG_CMD_TIME
221
222 #ifdef CONFIG_CMD_NAND
223
224 /* NAND stuff */
225 #define CONFIG_NAND_MXS
226 #define CONFIG_SYS_MAX_NAND_DEVICE      1
227 #define CONFIG_SYS_NAND_BASE            0x40000000
228 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
229 #define CONFIG_SYS_NAND_ONFI_DETECTION
230
231 /* DMA stuff, needed for GPMI/MXS NAND support */
232 #define CONFIG_APBH_DMA
233 #define CONFIG_APBH_DMA_BURST
234 #define CONFIG_APBH_DMA_BURST8
235
236 /* Environment in NAND */
237 #define CONFIG_ENV_IS_IN_NAND
238 #define CONFIG_ENV_OFFSET               (16 << 20)
239 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
240 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
241 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + (512 << 10))
242 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
243
244 #else /* CONFIG_CMD_NAND */
245
246 /* Environment in MMC */
247 #define CONFIG_ENV_SIZE                 (8 << 10)
248 #define CONFIG_ENV_IS_IN_MMC
249 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
250 #define CONFIG_SYS_MMC_ENV_DEV          0
251
252 #endif /* CONFIG_CMD_NAND */
253
254 /* UBI/UBIFS config options */
255 #define CONFIG_LZO
256 #define CONFIG_MTD_DEVICE
257 #define CONFIG_MTD_PARTITIONS
258 #define CONFIG_RBTREE
259 #define CONFIG_CMD_MTDPARTS
260 #define CONFIG_CMD_UBI
261 #define CONFIG_CMD_UBIFS
262
263 #define CONFIG_OF_LIBFDT
264 #define CONFIG_CMD_BOOTZ
265
266 #ifndef CONFIG_SYS_DCACHE_OFF
267 #define CONFIG_CMD_CACHE
268 #endif
269
270 #endif                         /* __CONFIG_H */