include/configs/ti_armv7_keystone2.h

   1 /*
   2  * Common configuration header file for all Keystone II EVM platforms
   3  *
   4  * (C) Copyright 2012-2014
   5  *     Texas Instruments Incorporated, <www.ti.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_KS2_EVM_H
  11 #define __CONFIG_KS2_EVM_H
  12
  13 #define CONFIG_SOC_KEYSTONE
  14
  15 /* U-Boot Build Configuration */
  16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is a 2nd stage loader */
  17
  18 /* SoC Configuration */
  19 #define CONFIG_ARCH_CPU_INIT
  20 #define CONFIG_SYS_ARCH_TIMER
  21 #define CONFIG_SPL_TARGET               "u-boot-spi.gph"
  22 #define CONFIG_SYS_DCACHE_OFF
  23
  24 /* Memory Configuration */
  25 #define CONFIG_NR_DRAM_BANKS            2
  26 #define CONFIG_SYS_LPAE_SDRAM_BASE      0x800000000
  27 #define CONFIG_MAX_RAM_BANK_SIZE        (2 << 30)       /* 2GB */
  28 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE - \
  29                                         GENERATED_GBL_DATA_SIZE)
  30
  31 #ifdef CONFIG_SYS_MALLOC_F_LEN
  32 #define SPL_MALLOC_F_SIZE       CONFIG_SYS_MALLOC_F_LEN
  33 #else
  34 #define SPL_MALLOC_F_SIZE       0
  35 #endif
  36
  37 /* SPL SPI Loader Configuration */
  38 #define CONFIG_SPL_PAD_TO               65536
  39 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_PAD_TO - 8)
  40 #define CONFIG_SPL_BSS_START_ADDR       (CONFIG_SPL_TEXT_BASE + \
  41                                         CONFIG_SPL_MAX_SIZE)
  42 #define CONFIG_SPL_BSS_MAX_SIZE         (32 * 1024)
  43 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  44                                         CONFIG_SPL_BSS_MAX_SIZE)
  45 #define CONFIG_SYS_SPL_MALLOC_SIZE      (32 * 1024)
  46 #define KEYSTONE_SPL_STACK_SIZE         (8 * 1024)
  47 #define CONFIG_SPL_STACK                (CONFIG_SYS_SPL_MALLOC_START + \
  48                                         CONFIG_SYS_SPL_MALLOC_SIZE + \
  49                                         SPL_MALLOC_F_SIZE + \
  50                                         KEYSTONE_SPL_STACK_SIZE - 4)
  51 #define CONFIG_SPL_SPI_LOAD
  52 #define CONFIG_SYS_SPI_U_BOOT_OFFS      CONFIG_SPL_PAD_TO
  53
  54 /* SRAM scratch space entries  */
  55 #define SRAM_SCRATCH_SPACE_ADDR CONFIG_SPL_STACK + 0x8
  56
  57 #define TI_SRAM_SCRATCH_BOARD_EEPROM_START      (SRAM_SCRATCH_SPACE_ADDR)
  58 #define TI_SRAM_SCRATCH_BOARD_EEPROM_END        (SRAM_SCRATCH_SPACE_ADDR + 0x200)
  59 #define KEYSTONE_SRAM_SCRATCH_SPACE_END         (TI_SRAM_SCRATCH_BOARD_EEPROM_END)
  60
  61 /* UART Configuration */
  62 #define CONFIG_SYS_NS16550_MEM32
  63 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
  64 #define CONFIG_SYS_NS16550_SERIAL
  65 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  66 #endif
  67 #define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
  68 #define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
  69 #define CONFIG_CONS_INDEX               1
  70
  71 #ifndef CONFIG_SOC_K2G
  72 #define CONFIG_SYS_NS16550_CLK          ks_clk_get_rate(KS2_CLK1_6)
  73 #else
  74 #define CONFIG_SYS_NS16550_CLK          ks_clk_get_rate(uart_pll_clk) / 2
  75 #endif
  76
  77 /* SPI Configuration */
  78 #define CONFIG_SYS_SPI_CLK              ks_clk_get_rate(KS2_CLK1_6)
  79 #define CONFIG_SF_DEFAULT_SPEED         30000000
  80 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  81 #define CONFIG_SYS_SPI0
  82 #define CONFIG_SYS_SPI_BASE             KS2_SPI0_BASE
  83 #define CONFIG_SYS_SPI0_NUM_CS          4
  84 #define CONFIG_SYS_SPI1
  85 #define CONFIG_SYS_SPI1_BASE            KS2_SPI1_BASE
  86 #define CONFIG_SYS_SPI1_NUM_CS          4
  87 #define CONFIG_SYS_SPI2
  88 #define CONFIG_SYS_SPI2_BASE            KS2_SPI2_BASE
  89 #define CONFIG_SYS_SPI2_NUM_CS          4
  90 #ifdef CONFIG_SPL_BUILD
  91 #undef CONFIG_DM_SPI
  92 #undef CONFIG_DM_SPI_FLASH
  93 #endif
  94
  95 /* Network Configuration */
  96 #define CONFIG_PHY_MARVELL
  97 #define CONFIG_MII
  98 #define CONFIG_BOOTP_DEFAULT
  99 #define CONFIG_BOOTP_DNS
 100 #define CONFIG_BOOTP_DNS2
 101 #define CONFIG_BOOTP_SEND_HOSTNAME
 102 #define CONFIG_NET_RETRY_COUNT          32
 103 #define CONFIG_SYS_SGMII_REFCLK_MHZ     312
 104 #define CONFIG_SYS_SGMII_LINERATE_MHZ   1250
 105 #define CONFIG_SYS_SGMII_RATESCALE      2
 106
 107 /* Keyston Navigator Configuration */
 108 #define CONFIG_TI_KSNAV
 109 #define CONFIG_KSNAV_QM_BASE_ADDRESS            KS2_QM_BASE_ADDRESS
 110 #define CONFIG_KSNAV_QM_CONF_BASE               KS2_QM_CONF_BASE
 111 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE         KS2_QM_DESC_SETUP_BASE
 112 #define CONFIG_KSNAV_QM_STATUS_RAM_BASE         KS2_QM_STATUS_RAM_BASE
 113 #define CONFIG_KSNAV_QM_INTD_CONF_BASE          KS2_QM_INTD_CONF_BASE
 114 #define CONFIG_KSNAV_QM_PDSP1_CMD_BASE          KS2_QM_PDSP1_CMD_BASE
 115 #define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE         KS2_QM_PDSP1_CTRL_BASE
 116 #define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE         KS2_QM_PDSP1_IRAM_BASE
 117 #define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE     KS2_QM_MANAGER_QUEUES_BASE
 118 #define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE    KS2_QM_MANAGER_Q_PROXY_BASE
 119 #define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE       KS2_QM_QUEUE_STATUS_BASE
 120 #define CONFIG_KSNAV_QM_LINK_RAM_BASE           KS2_QM_LINK_RAM_BASE
 121 #define CONFIG_KSNAV_QM_REGION_NUM              KS2_QM_REGION_NUM
 122 #define CONFIG_KSNAV_QM_QPOOL_NUM               KS2_QM_QPOOL_NUM
 123
 124 /* NETCP pktdma */
 125 #define CONFIG_KSNAV_PKTDMA_NETCP
 126 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE       KS2_NETCP_PDMA_CTRL_BASE
 127 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE         KS2_NETCP_PDMA_TX_BASE
 128 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM       KS2_NETCP_PDMA_TX_CH_NUM
 129 #define CONFIG_KSNAV_NETCP_PDMA_RX_BASE         KS2_NETCP_PDMA_RX_BASE
 130 #define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM       KS2_NETCP_PDMA_RX_CH_NUM
 131 #define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE      KS2_NETCP_PDMA_SCHED_BASE
 132 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE    KS2_NETCP_PDMA_RX_FLOW_BASE
 133 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM     KS2_NETCP_PDMA_RX_FLOW_NUM
 134 #define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE   KS2_NETCP_PDMA_RX_FREE_QUEUE
 135 #define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE    KS2_NETCP_PDMA_RX_RCV_QUEUE
 136 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE    KS2_NETCP_PDMA_TX_SND_QUEUE
 137
 138 /* Keystone net */
 139 #define CONFIG_DRIVER_TI_KEYSTONE_NET
 140 #define CONFIG_KSNET_MAC_ID_BASE                KS2_MAC_ID_BASE_ADDR
 141 #define CONFIG_KSNET_NETCP_BASE                 KS2_NETCP_BASE
 142 #define CONFIG_KSNET_SERDES_SGMII_BASE          KS2_SGMII_SERDES_BASE
 143 #define CONFIG_KSNET_SERDES_SGMII2_BASE         KS2_SGMII_SERDES2_BASE
 144 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII     KS2_LANES_PER_SGMII_SERDES
 145
 146 /* SerDes */
 147 #define CONFIG_TI_KEYSTONE_SERDES
 148
 149 #define CONFIG_AEMIF_CNTRL_BASE         KS2_AEMIF_CNTRL_BASE
 150
 151 /* I2C Configuration */
 152 #define CONFIG_SYS_I2C_DAVINCI
 153 #define CONFIG_SYS_DAVINCI_I2C_SPEED    100000
 154 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    0x10 /* SMBus host address */
 155 #define CONFIG_SYS_DAVINCI_I2C_SPEED1   100000
 156 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1   0x10 /* SMBus host address */
 157 #define CONFIG_SYS_DAVINCI_I2C_SPEED2   100000
 158 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2   0x10 /* SMBus host address */
 159
 160 /* EEPROM definitions */
 161 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 162 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 163 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 164 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 165 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 166
 167 /* NAND Configuration */
 168 #define CONFIG_NAND_DAVINCI
 169 #define CONFIG_KEYSTONE_RBL_NAND
 170 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE       CONFIG_ENV_OFFSET
 171 #define CONFIG_SYS_NAND_MASK_CLE                0x4000
 172 #define CONFIG_SYS_NAND_MASK_ALE                0x2000
 173 #define CONFIG_SYS_NAND_CS                      2
 174 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 175 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 176
 177 #define CONFIG_SYS_NAND_LARGEPAGE
 178 #define CONFIG_SYS_NAND_BASE_LIST               { 0x30000000, }
 179 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 180 #define CONFIG_SYS_NAND_MAX_CHIPS               1
 181 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 182 #define CONFIG_MTD_PARTITIONS
 183
 184 /* USB Configuration */
 185 #define CONFIG_USB_XHCI_KEYSTONE
 186 #define CONFIG_USB_SS_BASE                      KS2_USB_SS_BASE
 187 #define CONFIG_USB_HOST_XHCI_BASE               KS2_USB_HOST_XHCI_BASE
 188 #define CONFIG_DEV_USB_PHY_BASE                 KS2_DEV_USB_PHY_BASE
 189 #define CONFIG_USB_PHY_CFG_BASE                 KS2_USB_PHY_CFG_BASE
 190
 191 /* U-Boot general configuration */
 192 #define CONFIG_MISC_INIT_R
 193 #define CONFIG_MX_CYCLIC
 194 #define CONFIG_TIMESTAMP
 195
 196 /* EDMA3 */
 197 #define CONFIG_TI_EDMA3
 198
 199 #define KERNEL_MTD_PARTS                                                \
 200         "mtdparts="                                                     \
 201         SPI_MTD_PARTS
 202
 203 #define DEFAULT_FW_INITRAMFS_BOOT_ENV                                   \
 204         "name_fw_rd=k2-fw-initrd.cpio.gz\0"                             \
 205         "set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"            \
 206         "init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; "    \
 207                 "run set_rd_spec\0"                                     \
 208         "init_fw_rd_nfs=nfs ${rdaddr} ${nfs_root}/boot/${name_fw_rd}; " \
 209                 "run set_rd_spec\0"                                     \
 210         "init_fw_rd_ramfs=setenv rd_spec -\0"                           \
 211         "init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; " \
 212                 "run set_rd_spec\0"                                     \
 213
 214 #define DEFAULT_PMMC_BOOT_ENV                                           \
 215         "set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
 216         "dev_pmmc=0\0"                                                  \
 217         "get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0"     \
 218         "get_pmmc_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_pmmc}\0"  \
 219         "get_pmmc_ramfs=run get_pmmc_net\0"                             \
 220         "get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} "                \
 221                         "${bootdir}/${name_pmmc}\0"                     \
 222         "get_pmmc_ubi=ubifsload ${loadaddr} ${bootdir}/${name_pmmc}\0"  \
 223         "run_pmmc=rproc init; rproc list; "                             \
 224                 "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; "    \
 225                 "rproc start ${dev_pmmc}\0"                             \
 226
 227 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 228         DEFAULT_LINUX_BOOT_ENV                                          \
 229         CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS                             \
 230         "bootdir=/boot\0" \
 231         "tftp_root=/\0"                                                 \
 232         "nfs_root=/export\0"                                            \
 233         "mem_lpae=1\0"                                                  \
 234         "addr_ubi=0x82000000\0"                                         \
 235         "addr_secdb_key=0xc000000\0"                                    \
 236         "name_kern=zImage\0"                                            \
 237         "addr_mon=0x87000000\0"                                         \
 238         "addr_non_sec_mon=0x0c087fc0\0"                                 \
 239         "addr_load_sec_bm=0x0c08c000\0"                                 \
 240         "run_mon=mon_install ${addr_mon}\0"                             \
 241         "run_mon_hs=mon_install ${addr_non_sec_mon} "                   \
 242                         "${addr_load_sec_bm}\0"                         \
 243         "run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"            \
 244         "init_net=run args_all args_net\0"                              \
 245         "init_nfs=setenv autoload no; dhcp; run args_all args_net\0"    \
 246         "init_ubi=run args_all args_ubi; "                              \
 247                 "ubi part ubifs; ubifsmount ubi:rootfs;\0"                      \
 248         "get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"        \
 249         "get_fdt_nfs=nfs ${fdtaddr} ${nfs_root}/boot/${name_fdt}\0"     \
 250         "get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0"             \
 251         "get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"     \
 252         "get_kern_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_kern}\0"  \
 253         "get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"          \
 254         "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"       \
 255         "get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0"    \
 256         "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"    \
 257         "get_fit_net=dhcp ${fit_loadaddr} ${tftp_root}"                 \
 258                                                 "/${fit_bootfile}\0"    \
 259         "get_fit_nfs=nfs ${fit_loadaddr} ${nfs_root}/boot/${fit_bootfile}\0"\
 260         "get_fit_ubi=ubifsload ${fit_loadaddr} ${bootdir}/${fit_bootfile}\0"\
 261         "get_fit_mmc=load mmc ${bootpart} ${fit_loadaddr} "             \
 262                                         "${bootdir}/${fit_bootfile}\0"  \
 263         "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"   \
 264         "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
 265         "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
 266                 "sf write ${loadaddr} 0 ${filesize}\0"          \
 267         "burn_uboot_nand=nand erase 0 0x100000; "                       \
 268                 "nand write ${loadaddr} 0 ${filesize}\0"                \
 269         "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "   \
 270                 KERNEL_MTD_PARTS                                        \
 271         "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
 272                 "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
 273                 "${nfs_options} ip=dhcp\0"                              \
 274         "nfs_options=v3,tcp,rsize=4096,wsize=4096\0"                    \
 275         "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"      \
 276         "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"   \
 277         "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"     \
 278         "get_fit_ramfs=dhcp ${fit_loadaddr} ${tftp_root}"               \
 279                                                 "/${fit_bootfile}\0"    \
 280         "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
 281         "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"       \
 282         "get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0"    \
 283         "burn_ubi=nand erase.part ubifs; "                              \
 284                 "nand write ${addr_ubi} ubifs ${filesize}\0"            \
 285         "init_ramfs=run args_all args_ramfs get_fs_ramfs\0"             \
 286         "args_ramfs=setenv bootargs ${bootargs} "                       \
 287                 "rdinit=/sbin/init rw root=/dev/ram0 "                  \
 288                 "initrd=0x808080000,80M\0"                              \
 289         "no_post=1\0"                                                   \
 290         "mtdparts=mtdparts=davinci_nand.0:"                             \
 291                 "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
 292
 293 #ifndef CONFIG_BOOTCOMMAND
 294 #ifndef CONFIG_TI_SECURE_DEVICE
 295 #define CONFIG_BOOTCOMMAND                                              \
 296         "run init_${boot}; "                                            \
 297         "run get_mon_${boot} run_mon; "                                 \
 298         "run get_kern_${boot}; "                                        \
 299         "run init_fw_rd_${boot}; "                                      \
 300         "run get_fdt_${boot}; "                                         \
 301         "run run_kern"
 302 #else
 303 #define CONFIG_BOOTCOMMAND                                              \
 304         "run run_mon_hs; "                                              \
 305         "run init_${boot}; "                                            \
 306         "run get_fit_${boot}; "                                         \
 307         "bootm ${fit_loadaddr}#${name_fdt}"
 308 #endif
 309 #endif
 310
 311 /* Now for the remaining common defines */
 312 #include <configs/ti_armv7_common.h>
 313
 314 /* we may include files below only after all above definitions */
 315 #include <asm/arch/hardware.h>
 316 #include <asm/arch/clock.h>
 317 #ifndef CONFIG_SOC_K2G
 318 #define CONFIG_SYS_HZ_CLOCK             ks_clk_get_rate(KS2_CLK1_6)
 319 #else
 320 #define CONFIG_SYS_HZ_CLOCK             get_external_clk(sys_clk)
 321 #endif
 322
 323 #endif /* __CONFIG_KS2_EVM_H */