2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_THEADORABLE_H
8 #define _CONFIG_THEADORABLE_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
17 * for DDR ECC byte filling in the SPL before loading the main
20 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
23 * Commands configuration
27 * The debugging version enables USB support via defconfig.
28 * This version should also enable all other non-production
29 * interfaces / features.
33 #define CONFIG_SYS_I2C
34 #define CONFIG_SYS_I2C_MVTWSI
35 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
36 #define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE
37 #define CONFIG_SYS_I2C_SLAVE 0x0
38 #define CONFIG_SYS_I2C_SPEED 100000
40 /* USB/EHCI configuration */
41 #define CONFIG_EHCI_IS_TDI
42 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
44 /* SPI NOR flash default params, used by sf commands */
45 #define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */
46 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
48 /* Environment in SPI NOR flash */
49 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
50 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
51 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
52 #define CONFIG_ENV_OVERWRITE
54 #define CONFIG_PHY_MARVELL /* there is a marvell phy */
55 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
57 #define CONFIG_SYS_ALT_MEMTEST
58 #define CONFIG_PREBOOT
60 /* Keep device tree and initrd in lower memory so the kernel can access them */
61 #define CONFIG_EXTRA_ENV_SETTINGS \
62 "fdt_high=0x10000000\0" \
63 "initrd_high=0x10000000\0"
66 #define CONFIG_SYS_SATA_MAX_DEVICE 1
71 #ifndef CONFIG_SPL_BUILD
72 #define CONFIG_PCI_MVEBU
76 /* Enable LCD and reserve 512KB from top of memory*/
77 #define CONFIG_SYS_MEM_TOP_HIDE 0x80000
79 /* FPGA programming support */
80 #define CONFIG_FPGA_STRATIX_V
85 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
86 #define BOOTCOUNT_ADDR 0x1000
89 * mv-common.h should be defined after CMD configs since it used them
90 * to enable certain macros
92 #include "mv-common.h"
95 * Memory layout while starting into the bin_hdr via the
98 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
99 * 0x4000.4030 bin_hdr start address
100 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
101 * 0x4007.fffc BootROM stack top
103 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
104 * L2 cache thus cannot be used.
108 /* Defines for SPL */
109 #define CONFIG_SPL_TEXT_BASE 0x40004030
110 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
112 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
113 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
115 #ifdef CONFIG_SPL_BUILD
116 #define CONFIG_SYS_MALLOC_SIMPLE
119 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
120 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
122 /* SPL related SPI defines */
123 #define CONFIG_SPL_SPI_LOAD
124 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000
125 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
127 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
128 #define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */
130 #endif /* _CONFIG_THEADORABLE_H */