2 * (C) Copyright 2010-2012
3 * NVIDIA Corporation <www.nvidia.com>
5 * SPDX-License-Identifier: GPL-2.0+
8 #ifndef _TEGRA_COMMON_H_
9 #define _TEGRA_COMMON_H_
10 #include <linux/sizes.h>
11 #include <linux/stringify.h>
14 * High Level Configuration Options
16 #define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
17 #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
19 #include <asm/arch/tegra.h> /* get chip and board defs */
21 /* Use the Tegra US timer on ARMv7, but the architected timer on ARMv8. */
23 #define CONFIG_SYS_TIMER_RATE 1000000
24 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
28 * Display CPU and Board information
30 #define CONFIG_DISPLAY_CPUINFO
31 #define CONFIG_DISPLAY_BOARDINFO
33 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
36 #define CONFIG_ENV_VARS_UBOOT_CONFIG
37 #define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
40 * NS16550 Configuration
42 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
45 * Common HW configuration.
46 * If this varies between SoCs later, move to tegraNN-common.h
47 * Note: This is number of devices, not max device ID.
49 #define CONFIG_SYS_MMC_MAX_DEVICE 4
52 * select serial console configuration
54 #define CONFIG_CONS_INDEX 1
56 /* allow to overwrite serial and ethaddr */
57 #define CONFIG_ENV_OVERWRITE
58 #define CONFIG_BAUDRATE 115200
60 /* turn on command-line edit/hist/auto */
61 #define CONFIG_COMMAND_HISTORY
63 /* turn on commonly used storage-related commands */
64 #define CONFIG_PARTITION_UUIDS
65 #define CONFIG_CMD_PART
67 #define CONFIG_SYS_NO_FLASH
69 #define CONFIG_CONSOLE_MUX
70 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
71 #ifndef CONFIG_SPL_BUILD
72 #define CONFIG_SYS_STDIO_DEREGISTER
76 * Increasing the size of the IO buffer as default nfsargs size is more
77 * than 256 and so it is not possible to edit it
79 #define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
80 /* Print Buffer Size */
81 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
82 sizeof(CONFIG_SYS_PROMPT) + 16)
83 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
84 /* Boot Argument Buffer Size */
85 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
87 #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
88 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
91 #ifndef CONFIG_SPL_BUILD
92 #define CONFIG_USE_ARCH_MEMCPY
96 /*-----------------------------------------------------------------------
99 #define CONFIG_NR_DRAM_BANKS 2
100 #define PHYS_SDRAM_1 NV_PA_SDRC_CS0
101 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
103 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
104 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
106 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
108 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
109 #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
110 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
111 CONFIG_SYS_INIT_RAM_SIZE - \
112 GENERATED_GBL_DATA_SIZE)
114 #define CONFIG_CMD_ENTERRCM
116 /* Defines for SPL */
117 #define CONFIG_SPL_FRAMEWORK
118 #define CONFIG_SPL_RAM_DEVICE
119 #define CONFIG_SPL_BOARD_INIT
120 #define CONFIG_SPL_NAND_SIMPLE
121 #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \
122 CONFIG_SPL_TEXT_BASE)
123 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
125 #define CONFIG_BOARD_EARLY_INIT_F
126 #define CONFIG_BOARD_LATE_INIT
128 /* Misc utility code */
129 #define CONFIG_BOUNCE_BUFFER
130 #define CONFIG_CRC32_VERIFY
132 #ifndef CONFIG_SPL_BUILD
133 #include <config_distro_defaults.h>
134 #define CONFIG_FAT_WRITE
137 #endif /* _TEGRA_COMMON_H_ */