1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Soeren Moch <smoch@web.de>
5 * Configuration settings for the TBS2910 MatrixARM board.
8 #ifndef __TBS2910_CONFIG_H
9 #define __TBS2910_CONFIG_H
11 #include "mx6_common.h"
13 /* General configuration */
15 #define CONFIG_MACH_TYPE 3980
17 #define CONFIG_SYS_HZ 1000
19 #define CONFIG_IMX_THERMAL
21 /* Physical Memory Map */
22 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
24 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
25 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
26 #define CONFIG_SYS_INIT_SP_OFFSET \
27 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
28 #define CONFIG_SYS_INIT_SP_ADDR \
29 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
31 #define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
33 #define CONFIG_SYS_BOOTMAPSZ 0x10000000
36 #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
39 #define CONFIG_VIDEO_BMP_RLE8
40 #define CONFIG_IMX_HDMI
41 #define CONFIG_IMX_VIDEO_SKIP
45 #define CONFIG_PCI_SCAN_SHOW
46 #define CONFIG_PCIE_IMX
47 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
51 #ifdef CONFIG_CMD_SATA
52 #define CONFIG_SYS_SATA_MAX_DEVICE 1
53 #define CONFIG_DWC_AHSATA_PORT_ID 0
54 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
56 #define CONFIG_SYS_64BIT_LBA
61 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
62 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
63 #ifdef CONFIG_CMD_USB_MASS_STORAGE
64 #define CONFIG_USBD_HS
65 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
66 #endif /* CONFIG_CMD_USB */
68 /* Environment organization */
69 #define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */
70 #define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */
72 #define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */
74 #define CONFIG_EXTRA_ENV_SETTINGS \
76 "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
77 "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
78 "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
79 "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
80 "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
81 "${bootargs_mmc3}\0" \
82 "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
83 "rdinit=/sbin/init enable_wait_mode=off\0" \
84 "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
85 "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
86 "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
87 "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
88 "run bootargs_upd; " \
89 "bootm 0x10800000 0x10d00000\0" \
92 "fdt_addr=0x13000000\0" \
93 "fdt_addr_r=0x13000000\0" \
94 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
95 "kernel_addr_r=0x10008000\0" \
96 "pxefile_addr_r=0x10008000\0" \
97 "ramdisk_addr_r=0x18000000\0" \
98 "scriptaddr=0x14000000\0" \
99 "set_con_serial=setenv stdout serial; " \
100 "setenv stderr serial\0" \
101 "set_con_hdmi=setenv stdout serial,vidconsole; " \
102 "setenv stderr serial,vidconsole\0" \
103 "stderr=serial,vidconsole\0" \
104 "stdin=serial,usbkbd\0" \
105 "stdout=serial,vidconsole\0"
107 /* Enable distro boot */
108 #define BOOT_TARGET_DEVICES(func) \
112 func(SATA, sata, 0) \
115 #include <config_distro_bootcmd.h>
117 #endif /* __TBS2910_CONFIG_H * */