include/configs/tbs2910.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   4  *
   5  * Configuration settings for the TBS2910 MatrixARM board.
   6  */
   7
   8 #ifndef __TBS2910_CONFIG_H
   9 #define __TBS2910_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* General configuration */
  14
  15 #define CONFIG_MACH_TYPE                3980
  16
  17 #define CONFIG_SYS_HZ                   1000
  18
  19 #define CONFIG_IMX_THERMAL
  20
  21 /* Physical Memory Map */
  22 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  23
  24 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  25 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  26 #define CONFIG_SYS_INIT_SP_OFFSET \
  27         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  28 #define CONFIG_SYS_INIT_SP_ADDR \
  29         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  30
  31 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  32
  33 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  34 #define CONFIG_SYS_MEMTEST_END \
  35         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  36
  37 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  38
  39 /* Serial console */
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  42
  43 /* Filesystems / image support */
  44
  45 /* MMC */
  46 #define CONFIG_SYS_FSL_USDHC_NUM        3
  47 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  48 #define CONFIG_SUPPORT_EMMC_BOOT
  49
  50 /* Ethernet */
  51 #define CONFIG_FEC_MXC
  52 #define CONFIG_FEC_MXC
  53 #define CONFIG_MII
  54 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  55 #define CONFIG_FEC_XCV_TYPE             RGMII
  56 #define CONFIG_ETHPRIME                 "FEC"
  57 #define CONFIG_FEC_MXC_PHYADDR          4
  58 #define CONFIG_PHY_ATHEROS
  59
  60 /* Framebuffer */
  61 #ifdef CONFIG_VIDEO
  62 #define CONFIG_VIDEO_IPUV3
  63 #define CONFIG_VIDEO_BMP_RLE8
  64 #define CONFIG_IMX_HDMI
  65 #define CONFIG_IMX_VIDEO_SKIP
  66 #endif
  67
  68 /* PCI */
  69 #ifdef CONFIG_CMD_PCI
  70 #define CONFIG_PCI_SCAN_SHOW
  71 #define CONFIG_PCIE_IMX
  72 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  73 #endif
  74
  75 /* SATA */
  76 #ifdef CONFIG_CMD_SATA
  77 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  78 #define CONFIG_DWC_AHSATA_PORT_ID       0
  79 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  80 #define CONFIG_LBA48
  81 #endif
  82
  83 /* USB */
  84 #ifdef CONFIG_CMD_USB
  85 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  86 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  87 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  88 #ifdef CONFIG_CMD_USB_MASS_STORAGE
  89 #define CONFIG_USBD_HS
  90 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
  91 #ifdef CONFIG_USB_KEYBOARD
  92 #define CONFIG_PREBOOT \
  93         "usb start; " \
  94         "if hdmidet; then " \
  95                 "run set_con_hdmi; " \
  96         "else " \
  97                 "run set_con_serial; " \
  98         "fi;"
  99 #endif /* CONFIG_USB_KEYBOARD */
 100 #endif /* CONFIG_CMD_USB      */
 101
 102 /* RTC */
 103 #ifdef CONFIG_CMD_DATE
 104 #define CONFIG_RTC_DS1307
 105 #define CONFIG_SYS_RTC_BUS_NUM          2
 106 #endif
 107
 108 /* I2C */
 109 #ifdef CONFIG_CMD_I2C
 110 #define CONFIG_SYS_I2C
 111 #define CONFIG_SYS_I2C_MXC
 112 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 113 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 114 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 115 #define CONFIG_SYS_I2C_SPEED            100000
 116 #define CONFIG_I2C_EDID
 117 #endif
 118
 119 /* Environment organization */
 120 #define CONFIG_SYS_MMC_ENV_DEV          2 /* overwritten on SD boot */
 121 #define CONFIG_SYS_MMC_ENV_PART         1 /* overwritten on SD boot */
 122 #define CONFIG_ENV_SIZE                 (8 * 1024)
 123 #define CONFIG_ENV_OFFSET               (384 * 1024)
 124 #define CONFIG_ENV_OVERWRITE
 125
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 128         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 129                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 130         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 131         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 132                         "${bootargs_mmc3}\0" \
 133         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 134                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 135         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 136                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
 137         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 138         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 139                         "run bootargs_upd; " \
 140                         "bootm 0x10800000 0x10d00000\0" \
 141         "console=ttymxc0\0" \
 142         "fan=gpio set 92\0" \
 143         "set_con_serial=setenv stdout serial; " \
 144                         "setenv stderr serial;\0" \
 145         "set_con_hdmi=setenv stdout serial,vga; " \
 146                         "setenv stderr serial,vga;\0" \
 147         "stderr=serial,vga;\0" \
 148         "stdin=serial,usbkbd;\0" \
 149         "stdout=serial,vga;\0"
 150
 151 #define CONFIG_BOOTCOMMAND \
 152         "mmc rescan; " \
 153         "if run bootcmd_up1; then " \
 154                 "run bootcmd_up2; " \
 155         "else " \
 156                 "run bootcmd_mmc; " \
 157         "fi"
 158
 159 #endif                         /* __TBS2910_CONFIG_H * */