include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* General configuration */
  15 #define CONFIG_SYS_THUMB_BUILD
  16
  17 #define CONFIG_MACH_TYPE                3980
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20
  21 #define CONFIG_SYS_LONGHELP
  22 #define CONFIG_SYS_HUSH_PARSER
  23 #define CONFIG_SYS_PROMPT               "Matrix U-Boot> "
  24 #define CONFIG_BOOTDELAY                3
  25 #define CONFIG_AUTO_COMPLETE
  26 #define CONFIG_CMDLINE_EDITING
  27 #define CONFIG_SYS_MAXARGS              16
  28 #define CONFIG_SYS_CBSIZE               1024
  29 #define CONFIG_SYS_HZ                   1000
  30
  31 /* Physical Memory Map */
  32 #define CONFIG_NR_DRAM_BANKS            1
  33 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  34
  35 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  36 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  37 #define CONFIG_SYS_INIT_SP_OFFSET \
  38         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  39 #define CONFIG_SYS_INIT_SP_ADDR \
  40         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  41
  42 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  43
  44 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  45 #define CONFIG_SYS_MEMTEST_END \
  46         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  47
  48 #define CONFIG_SYS_TEXT_BASE            0x80000000
  49 #define CONFIG_SYS_BOOTMAPSZ            0x6C000000
  50 #define CONFIG_SYS_LOAD_ADDR            0x10800000
  51
  52 /* Serial console */
  53 #define CONFIG_MXC_UART
  54 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  55 #define CONFIG_BAUDRATE                 115200
  56
  57 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  58 #define CONFIG_CONSOLE_MUX
  59 #define CONFIG_CONS_INDEX               1
  60
  61 /* *** Command definition *** */
  62 #define CONFIG_CMD_BMODE
  63 #define CONFIG_CMD_SETEXPR
  64 #define CONFIG_CMD_MEMTEST
  65 #define CONFIG_CMD_TIME
  66
  67 /* Filesystems / image support */
  68 #define CONFIG_CMD_EXT4
  69 #define CONFIG_CMD_FAT
  70 #define CONFIG_DOS_PARTITION
  71 #define CONFIG_EFI_PARTITION
  72 #define CONFIG_CMD_FS_GENERIC
  73
  74 #define CONFIG_OF_LIBFDT
  75 #define CONFIG_CMD_BOOTZ
  76 #define CONFIG_SUPPORT_RAW_INITRD
  77 #define CONFIG_FIT
  78
  79 /* MMC */
  80 #define CONFIG_FSL_ESDHC
  81 #define CONFIG_FSL_USDHC
  82 #define CONFIG_SYS_FSL_USDHC_NUM        3
  83 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  84
  85 #define CONFIG_MMC
  86 #define CONFIG_CMD_MMC
  87 #define CONFIG_GENERIC_MMC
  88 #define CONFIG_SUPPORT_EMMC_BOOT
  89 #define CONFIG_BOUNCE_BUFFER
  90
  91 /* Ethernet */
  92 #define CONFIG_FEC_MXC
  93 #define CONFIG_CMD_PING
  94 #define CONFIG_CMD_DHCP
  95 #define CONFIG_CMD_MII
  96 #define CONFIG_CMD_NET
  97 #define CONFIG_FEC_MXC
  98 #define CONFIG_MII
  99 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 100 #define CONFIG_FEC_XCV_TYPE             RGMII
 101 #define CONFIG_ETHPRIME                 "FEC"
 102 #define CONFIG_FEC_MXC_PHYADDR          4
 103 #define CONFIG_PHYLIB
 104 #define CONFIG_PHY_ATHEROS
 105
 106 /* Framebuffer */
 107 #define CONFIG_VIDEO
 108 #ifdef CONFIG_VIDEO
 109 #define CONFIG_VIDEO_IPUV3
 110 #define CONFIG_IPUV3_CLK                260000000
 111 #define CONFIG_CFB_CONSOLE
 112 #define CONFIG_CFB_CONSOLE_ANSI
 113 #define CONFIG_VIDEO_SW_CURSOR
 114 #define CONFIG_VGA_AS_SINGLE_DEVICE
 115 #define CONFIG_VIDEO_BMP_RLE8
 116 #define CONFIG_IMX_HDMI
 117 #define CONFIG_IMX_VIDEO_SKIP
 118 #define CONFIG_CMD_HDMIDETECT
 119 #endif
 120
 121 /* PCI */
 122 #define CONFIG_CMD_PCI
 123 #ifdef CONFIG_CMD_PCI
 124 #define CONFIG_PCI
 125 #define CONFIG_PCI_PNP
 126 #define CONFIG_PCI_SCAN_SHOW
 127 #define CONFIG_PCIE_IMX
 128 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 129 #endif
 130
 131 /* SATA */
 132 #define CONFIG_CMD_SATA
 133 #ifdef CONFIG_CMD_SATA
 134 #define CONFIG_DWC_AHSATA
 135 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 136 #define CONFIG_DWC_AHSATA_PORT_ID       0
 137 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 138 #define CONFIG_LBA48
 139 #define CONFIG_LIBATA
 140 #endif
 141
 142 /* USB */
 143 #define CONFIG_CMD_USB
 144 #ifdef CONFIG_CMD_USB
 145 #define CONFIG_USB_EHCI
 146 #define CONFIG_USB_EHCI_MX6
 147 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 148 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 149 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 150 #define CONFIG_USB_STORAGE
 151 #define CONFIG_CMD_USB_MASS_STORAGE
 152 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 153 #define CONFIG_CI_UDC
 154 #define CONFIG_USBD_HS
 155 #define CONFIG_USB_GADGET
 156 #define CONFIG_USB_GADGET_MASS_STORAGE
 157 #define CONFIG_USB_GADGET_DUALSPEED
 158 #define CONFIG_USB_GADGET_VBUS_DRAW     0
 159 #define CONFIG_USBDOWNLOAD_GADGET
 160 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 161 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 162 #define CONFIG_G_DNL_MANUFACTURER       "TBS"
 163 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 164 #define CONFIG_USB_KEYBOARD
 165 #ifdef CONFIG_USB_KEYBOARD
 166 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 167 #define CONFIG_SYS_STDIO_DEREGISTER
 168 #define CONFIG_PREBOOT \
 169         "if hdmidet; then " \
 170                 "usb start; " \
 171                 "run set_con_usb_hdmi; " \
 172         "else " \
 173                 "run set_con_serial; " \
 174         "fi;"
 175 #endif /* CONFIG_USB_KEYBOARD */
 176 #endif /* CONFIG_CMD_USB      */
 177
 178 /* RTC */
 179 #define CONFIG_CMD_DATE
 180 #ifdef CONFIG_CMD_DATE
 181 #define CONFIG_CMD_I2C
 182 #define CONFIG_RTC_DS1307
 183 #define CONFIG_SYS_RTC_BUS_NUM          2
 184 #endif
 185
 186 /* I2C */
 187 #define CONFIG_CMD_I2C
 188 #ifdef CONFIG_CMD_I2C
 189 #define CONFIG_SYS_I2C
 190 #define CONFIG_SYS_I2C_MXC
 191 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 192 #define CONFIG_SYS_I2C_SPEED            100000
 193 #define CONFIG_I2C_EDID
 194 #endif
 195
 196 /* Fuses */
 197 #define CONFIG_CMD_FUSE
 198 #ifdef CONFIG_CMD_FUSE
 199 #define CONFIG_MXC_OCOTP
 200 #endif
 201
 202 #ifndef CONFIG_SYS_DCACHE_OFF
 203 #define CONFIG_CMD_CACHE
 204 #endif
 205
 206 /* Environment organization */
 207 #define CONFIG_ENV_IS_IN_MMC
 208 #define CONFIG_SYS_MMC_ENV_DEV          2
 209 #define CONFIG_SYS_MMC_ENV_PART         1
 210 #define CONFIG_ENV_SIZE                 (8 * 1024)
 211 #define CONFIG_ENV_OFFSET               (384 * 1024)
 212 #define CONFIG_ENV_OVERWRITE
 213
 214 #define CONFIG_EXTRA_ENV_SETTINGS \
 215         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 216         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 217                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 218         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 219         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 220                         "${bootargs_mmc3}\0" \
 221         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 222                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 223         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 224                         "mmc read 0x10800000 0x800 0x4000; bootm\0" \
 225         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 226         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 227                         "run bootargs_upd; " \
 228                         "bootm 0x10800000 0x10d00000\0" \
 229         "console=ttymxc0\0" \
 230         "fan=gpio set 92\0" \
 231         "set_con_serial=setenv stdin serial; " \
 232                         "setenv stdout serial; " \
 233                         "setenv stderr serial;\0" \
 234         "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
 235                         "setenv stdout serial,vga; " \
 236                         "setenv stderr serial,vga;\0"
 237
 238 #define CONFIG_BOOTCOMMAND \
 239         "mmc rescan; " \
 240         "if run bootcmd_up1; then " \
 241                 "run bootcmd_up2; " \
 242         "else " \
 243                 "run bootcmd_mmc; " \
 244         "fi"
 245
 246 #endif                         /* __TBS2910_CONFIG_H * */