include/configs/tbs2910.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   4  *
   5  * Configuration settings for the TBS2910 MatrixARM board.
   6  */
   7
   8 #ifndef __TBS2910_CONFIG_H
   9 #define __TBS2910_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* General configuration */
  14
  15 /* Physical Memory Map */
  16 #define CFG_SYS_SDRAM_BASE              MMDC0_ARB_BASE_ADDR
  17
  18 #define CFG_SYS_INIT_RAM_ADDR   IRAM_BASE_ADDR
  19 #define CFG_SYS_INIT_RAM_SIZE   IRAM_SIZE
  20
  21 #define CFG_SYS_BOOTMAPSZ               0x10000000
  22
  23 /* Framebuffer */
  24 #define CONFIG_IMX_HDMI
  25 #define CONFIG_IMX_VIDEO_SKIP
  26
  27 /* PCI */
  28 #ifdef CONFIG_CMD_PCI
  29 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  30 #endif
  31
  32 /* USB */
  33 #ifdef CONFIG_CMD_USB
  34 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  35 #ifdef CONFIG_CMD_USB_MASS_STORAGE
  36 #define CONFIG_USBD_HS
  37 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
  38 #endif /* CONFIG_CMD_USB      */
  39
  40 #define CONFIG_EXTRA_ENV_SETTINGS \
  41         BOOTENV \
  42         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
  43         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
  44                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
  45         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
  46         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
  47                         "${bootargs_mmc3}\0" \
  48         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
  49                         "rdinit=/sbin/init enable_wait_mode=off\0" \
  50         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
  51                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
  52         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
  53         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
  54                         "run bootargs_upd; " \
  55                         "bootm 0x10800000 0x10d00000\0" \
  56         "console=ttymxc0\0" \
  57         "fan=gpio set 92\0" \
  58         "fdt_addr_r=0x18000000\0" \
  59         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
  60         "kernel_addr_r=0x12000000\0" \
  61         "pxefile_addr_r=0x10100000\0" \
  62         "ramdisk_addr_r=0x18080000\0" \
  63         "scriptaddr=0x10000000\0" \
  64         "stderr=serial,vidconsole\0" \
  65         "stdin=serial,usbkbd\0" \
  66         "stdout=serial,vidconsole\0"
  67
  68 /* Enable distro boot */
  69 #define BOOT_TARGET_DEVICES(func) \
  70         func(MMC, mmc, 0) \
  71         func(MMC, mmc, 1) \
  72         func(MMC, mmc, 2) \
  73         func(SATA, sata, 0) \
  74         func(USB, usb, 0)
  75
  76 #include <config_distro_bootcmd.h>
  77
  78 #endif                         /* __TBS2910_CONFIG_H * */