include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* General configuration */
  15 #define CONFIG_SYS_THUMB_BUILD
  16
  17 #define CONFIG_MACH_TYPE                3980
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20
  21 #define CONFIG_SYS_LONGHELP
  22 #define CONFIG_SYS_HUSH_PARSER
  23 #define CONFIG_SYS_PROMPT               "Matrix U-Boot> "
  24 #define CONFIG_AUTO_COMPLETE
  25 #define CONFIG_CMDLINE_EDITING
  26 #define CONFIG_SYS_MAXARGS              16
  27 #define CONFIG_SYS_CBSIZE               1024
  28 #define CONFIG_SYS_HZ                   1000
  29
  30 /* Physical Memory Map */
  31 #define CONFIG_NR_DRAM_BANKS            1
  32 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  33
  34 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  35 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  36 #define CONFIG_SYS_INIT_SP_OFFSET \
  37         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  38 #define CONFIG_SYS_INIT_SP_ADDR \
  39         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  40
  41 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  42
  43 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  44 #define CONFIG_SYS_MEMTEST_END \
  45         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  46
  47 #define CONFIG_SYS_BOOTMAPSZ            0x6C000000
  48
  49 /* Serial console */
  50 #define CONFIG_MXC_UART
  51 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  52 #define CONFIG_BAUDRATE                 115200
  53
  54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  55 #define CONFIG_CONSOLE_MUX
  56 #define CONFIG_CONS_INDEX               1
  57
  58 /* *** Command definition *** */
  59 #define CONFIG_CMD_BMODE
  60 #define CONFIG_CMD_SETEXPR
  61 #define CONFIG_CMD_MEMTEST
  62 #define CONFIG_CMD_TIME
  63
  64 /* Filesystems / image support */
  65 #define CONFIG_CMD_EXT4
  66 #define CONFIG_CMD_FAT
  67 #define CONFIG_DOS_PARTITION
  68 #define CONFIG_EFI_PARTITION
  69 #define CONFIG_CMD_FS_GENERIC
  70
  71 #define CONFIG_OF_LIBFDT
  72 #define CONFIG_CMD_BOOTZ
  73 #define CONFIG_SUPPORT_RAW_INITRD
  74 #define CONFIG_FIT
  75
  76 /* MMC */
  77 #define CONFIG_FSL_ESDHC
  78 #define CONFIG_FSL_USDHC
  79 #define CONFIG_SYS_FSL_USDHC_NUM        3
  80 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  81
  82 #define CONFIG_MMC
  83 #define CONFIG_CMD_MMC
  84 #define CONFIG_GENERIC_MMC
  85 #define CONFIG_SUPPORT_EMMC_BOOT
  86 #define CONFIG_BOUNCE_BUFFER
  87
  88 /* Ethernet */
  89 #define CONFIG_FEC_MXC
  90 #define CONFIG_CMD_PING
  91 #define CONFIG_CMD_DHCP
  92 #define CONFIG_CMD_MII
  93 #define CONFIG_CMD_NET
  94 #define CONFIG_FEC_MXC
  95 #define CONFIG_MII
  96 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  97 #define CONFIG_FEC_XCV_TYPE             RGMII
  98 #define CONFIG_ETHPRIME                 "FEC"
  99 #define CONFIG_FEC_MXC_PHYADDR          4
 100 #define CONFIG_PHYLIB
 101 #define CONFIG_PHY_ATHEROS
 102
 103 /* Framebuffer */
 104 #define CONFIG_VIDEO
 105 #ifdef CONFIG_VIDEO
 106 #define CONFIG_VIDEO_IPUV3
 107 #define CONFIG_IPUV3_CLK                260000000
 108 #define CONFIG_CFB_CONSOLE
 109 #define CONFIG_CFB_CONSOLE_ANSI
 110 #define CONFIG_VIDEO_SW_CURSOR
 111 #define CONFIG_VGA_AS_SINGLE_DEVICE
 112 #define CONFIG_VIDEO_BMP_RLE8
 113 #define CONFIG_IMX_HDMI
 114 #define CONFIG_IMX_VIDEO_SKIP
 115 #define CONFIG_CMD_HDMIDETECT
 116 #endif
 117
 118 /* PCI */
 119 #define CONFIG_CMD_PCI
 120 #ifdef CONFIG_CMD_PCI
 121 #define CONFIG_PCI
 122 #define CONFIG_PCI_PNP
 123 #define CONFIG_PCI_SCAN_SHOW
 124 #define CONFIG_PCIE_IMX
 125 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 126 #endif
 127
 128 /* SATA */
 129 #define CONFIG_CMD_SATA
 130 #ifdef CONFIG_CMD_SATA
 131 #define CONFIG_DWC_AHSATA
 132 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 133 #define CONFIG_DWC_AHSATA_PORT_ID       0
 134 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 135 #define CONFIG_LBA48
 136 #define CONFIG_LIBATA
 137 #endif
 138
 139 /* USB */
 140 #define CONFIG_CMD_USB
 141 #ifdef CONFIG_CMD_USB
 142 #define CONFIG_USB_EHCI
 143 #define CONFIG_USB_EHCI_MX6
 144 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 145 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 146 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 147 #define CONFIG_USB_STORAGE
 148 #define CONFIG_CMD_USB_MASS_STORAGE
 149 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 150 #define CONFIG_CI_UDC
 151 #define CONFIG_USBD_HS
 152 #define CONFIG_USB_GADGET
 153 #define CONFIG_USB_GADGET_MASS_STORAGE
 154 #define CONFIG_USB_GADGET_DUALSPEED
 155 #define CONFIG_USB_GADGET_VBUS_DRAW     0
 156 #define CONFIG_USBDOWNLOAD_GADGET
 157 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 158 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 159 #define CONFIG_G_DNL_MANUFACTURER       "TBS"
 160 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 161 #define CONFIG_USB_KEYBOARD
 162 #ifdef CONFIG_USB_KEYBOARD
 163 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 164 #define CONFIG_SYS_STDIO_DEREGISTER
 165 #define CONFIG_PREBOOT \
 166         "if hdmidet; then " \
 167                 "usb start; " \
 168                 "run set_con_usb_hdmi; " \
 169         "else " \
 170                 "run set_con_serial; " \
 171         "fi;"
 172 #endif /* CONFIG_USB_KEYBOARD */
 173 #endif /* CONFIG_CMD_USB      */
 174
 175 /* RTC */
 176 #define CONFIG_CMD_DATE
 177 #ifdef CONFIG_CMD_DATE
 178 #define CONFIG_CMD_I2C
 179 #define CONFIG_RTC_DS1307
 180 #define CONFIG_SYS_RTC_BUS_NUM          2
 181 #endif
 182
 183 /* I2C */
 184 #define CONFIG_CMD_I2C
 185 #ifdef CONFIG_CMD_I2C
 186 #define CONFIG_SYS_I2C
 187 #define CONFIG_SYS_I2C_MXC
 188 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 189 #define CONFIG_SYS_I2C_SPEED            100000
 190 #define CONFIG_I2C_EDID
 191 #endif
 192
 193 /* Fuses */
 194 #define CONFIG_CMD_FUSE
 195 #ifdef CONFIG_CMD_FUSE
 196 #define CONFIG_MXC_OCOTP
 197 #endif
 198
 199 #ifndef CONFIG_SYS_DCACHE_OFF
 200 #define CONFIG_CMD_CACHE
 201 #endif
 202
 203 /* Environment organization */
 204 #define CONFIG_ENV_IS_IN_MMC
 205 #define CONFIG_SYS_MMC_ENV_DEV          2
 206 #define CONFIG_SYS_MMC_ENV_PART         1
 207 #define CONFIG_ENV_SIZE                 (8 * 1024)
 208 #define CONFIG_ENV_OFFSET               (384 * 1024)
 209 #define CONFIG_ENV_OVERWRITE
 210
 211 #define CONFIG_EXTRA_ENV_SETTINGS \
 212         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 213         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 214                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 215         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 216         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 217                         "${bootargs_mmc3}\0" \
 218         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 219                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 220         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 221                         "mmc read 0x10800000 0x800 0x4000; bootm\0" \
 222         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 223         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 224                         "run bootargs_upd; " \
 225                         "bootm 0x10800000 0x10d00000\0" \
 226         "console=ttymxc0\0" \
 227         "fan=gpio set 92\0" \
 228         "set_con_serial=setenv stdin serial; " \
 229                         "setenv stdout serial; " \
 230                         "setenv stderr serial;\0" \
 231         "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
 232                         "setenv stdout serial,vga; " \
 233                         "setenv stderr serial,vga;\0"
 234
 235 #define CONFIG_BOOTCOMMAND \
 236         "mmc rescan; " \
 237         "if run bootcmd_up1; then " \
 238                 "run bootcmd_up2; " \
 239         "else " \
 240                 "run bootcmd_mmc; " \
 241         "fi"
 242
 243 #endif                         /* __TBS2910_CONFIG_H * */