include/configs/tbs2910.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   4  *
   5  * Configuration settings for the TBS2910 MatrixARM board.
   6  */
   7
   8 #ifndef __TBS2910_CONFIG_H
   9 #define __TBS2910_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* General configuration */
  14
  15 #define CONFIG_MACH_TYPE                3980
  16
  17 #define CONFIG_SYS_HZ                   1000
  18
  19 #define CONFIG_IMX_THERMAL
  20
  21 /* Physical Memory Map */
  22 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  23
  24 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  25 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  26 #define CONFIG_SYS_INIT_SP_OFFSET \
  27         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  28 #define CONFIG_SYS_INIT_SP_ADDR \
  29         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  30
  31 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  32
  33 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  34 #define CONFIG_SYS_MEMTEST_END \
  35         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  36
  37 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  38
  39 /* Serial console */
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  42
  43 /* Ethernet */
  44 #define CONFIG_FEC_MXC
  45 #define CONFIG_FEC_MXC
  46 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  47 #define CONFIG_FEC_XCV_TYPE             RGMII
  48 #define CONFIG_ETHPRIME                 "FEC"
  49 #define CONFIG_FEC_MXC_PHYADDR          4
  50 #define CONFIG_PHY_ATHEROS
  51
  52 /* Framebuffer */
  53 #ifdef CONFIG_VIDEO
  54 #define CONFIG_VIDEO_BMP_RLE8
  55 #define CONFIG_IMX_HDMI
  56 #define CONFIG_IMX_VIDEO_SKIP
  57 #endif
  58
  59 /* PCI */
  60 #ifdef CONFIG_CMD_PCI
  61 #define CONFIG_PCI_SCAN_SHOW
  62 #define CONFIG_PCIE_IMX
  63 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  64 #endif
  65
  66 /* SATA */
  67 #ifdef CONFIG_CMD_SATA
  68 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  69 #define CONFIG_DWC_AHSATA_PORT_ID       0
  70 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  71 #define CONFIG_LBA48
  72 #define CONFIG_SYS_64BIT_LBA
  73 #endif
  74
  75 /* USB */
  76 #ifdef CONFIG_CMD_USB
  77 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  78 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  79 #ifdef CONFIG_CMD_USB_MASS_STORAGE
  80 #define CONFIG_USBD_HS
  81 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
  82 #ifdef CONFIG_USB_KEYBOARD
  83 #define CONFIG_USE_PREBOOT
  84 #define CONFIG_PREBOOT \
  85         "usb start; " \
  86         "if hdmidet; then " \
  87                 "run set_con_hdmi; " \
  88         "else " \
  89                 "run set_con_serial; " \
  90         "fi"
  91 #endif /* CONFIG_USB_KEYBOARD */
  92 #endif /* CONFIG_CMD_USB      */
  93
  94 /* Environment organization */
  95 #define CONFIG_SYS_MMC_ENV_DEV          2 /* overwritten on SD boot */
  96 #define CONFIG_SYS_MMC_ENV_PART         1 /* overwritten on SD boot */
  97 #define CONFIG_ENV_SIZE                 (8 * 1024)
  98 #define CONFIG_ENV_OFFSET               (384 * 1024)
  99 #define CONFIG_ENV_OVERWRITE
 100
 101 #define CONFIG_BOARD_SIZE_LIMIT         392192 /* (CONFIG_ENV_OFFSET - 1024) */
 102
 103 #define CONFIG_EXTRA_ENV_SETTINGS \
 104         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 105         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 106                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 107         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 108         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 109                         "${bootargs_mmc3}\0" \
 110         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 111                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 112         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 113                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
 114         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 115         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 116                         "run bootargs_upd; " \
 117                         "bootm 0x10800000 0x10d00000\0" \
 118         "console=ttymxc0\0" \
 119         "fan=gpio set 92\0" \
 120         "set_con_serial=setenv stdout serial; " \
 121                         "setenv stderr serial\0" \
 122         "set_con_hdmi=setenv stdout serial,vga; " \
 123                         "setenv stderr serial,vga\0" \
 124         "stderr=serial,vga\0" \
 125         "stdin=serial,usbkbd\0" \
 126         "stdout=serial,vga\0"
 127
 128 #define CONFIG_BOOTCOMMAND \
 129         "mmc rescan; " \
 130         "if run bootcmd_up1; then " \
 131                 "run bootcmd_up2; " \
 132         "else " \
 133                 "run bootcmd_mmc; " \
 134         "fi"
 135
 136 #endif                         /* __TBS2910_CONFIG_H * */