include/configs/tbs2910.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   4  *
   5  * Configuration settings for the TBS2910 MatrixARM board.
   6  */
   7
   8 #ifndef __TBS2910_CONFIG_H
   9 #define __TBS2910_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* General configuration */
  14
  15 /* Physical Memory Map */
  16 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  17
  18 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  19 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  20 #define CONFIG_SYS_INIT_SP_OFFSET \
  21         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  22 #define CONFIG_SYS_INIT_SP_ADDR \
  23         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  24
  25 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  26
  27 /* Serial console */
  28 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  29
  30 /* Framebuffer */
  31 #define CONFIG_IMX_HDMI
  32 #define CONFIG_IMX_VIDEO_SKIP
  33
  34 /* PCI */
  35 #ifdef CONFIG_CMD_PCI
  36 #define CONFIG_PCI_SCAN_SHOW
  37 #define CONFIG_PCIE_IMX
  38 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  39 #endif
  40
  41 /* SATA */
  42 #ifdef CONFIG_CMD_SATA
  43 #define CONFIG_DWC_AHSATA_PORT_ID       0
  44 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  45 #define CONFIG_LBA48
  46 #define CONFIG_SYS_64BIT_LBA
  47 #endif
  48
  49 /* USB */
  50 #ifdef CONFIG_CMD_USB
  51 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  52 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  53 #ifdef CONFIG_CMD_USB_MASS_STORAGE
  54 #define CONFIG_USBD_HS
  55 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
  56 #endif /* CONFIG_CMD_USB      */
  57
  58 #define CONFIG_EXTRA_ENV_SETTINGS \
  59         BOOTENV \
  60         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
  61         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
  62                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
  63         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
  64         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
  65                         "${bootargs_mmc3}\0" \
  66         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
  67                         "rdinit=/sbin/init enable_wait_mode=off\0" \
  68         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
  69                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
  70         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
  71         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
  72                         "run bootargs_upd; " \
  73                         "bootm 0x10800000 0x10d00000\0" \
  74         "console=ttymxc0\0" \
  75         "fan=gpio set 92\0" \
  76         "fdt_addr_r=0x18000000\0" \
  77         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
  78         "kernel_addr_r=0x12000000\0" \
  79         "pxefile_addr_r=0x10100000\0" \
  80         "ramdisk_addr_r=0x18080000\0" \
  81         "scriptaddr=0x10000000\0" \
  82         "set_con_serial=setenv stdout serial; " \
  83                         "setenv stderr serial\0" \
  84         "set_con_hdmi=setenv stdout serial,vidconsole; " \
  85                         "setenv stderr serial,vidconsole\0" \
  86         "stderr=serial,vidconsole\0" \
  87         "stdin=serial,usbkbd\0" \
  88         "stdout=serial,vidconsole\0"
  89
  90 /* Enable distro boot */
  91 #define BOOT_TARGET_DEVICES(func) \
  92         func(MMC, mmc, 0) \
  93         func(MMC, mmc, 1) \
  94         func(MMC, mmc, 2) \
  95         func(SATA, sata, 0) \
  96         func(USB, usb, 0)
  97
  98 #include <config_distro_bootcmd.h>
  99
 100 #endif                         /* __TBS2910_CONFIG_H * */