1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Soeren Moch <smoch@web.de>
5 * Configuration settings for the TBS2910 MatrixARM board.
8 #ifndef __TBS2910_CONFIG_H
9 #define __TBS2910_CONFIG_H
11 #include "mx6_common.h"
13 /* General configuration */
15 #define CONFIG_MACH_TYPE 3980
17 #define CONFIG_SYS_HZ 1000
19 /* Physical Memory Map */
20 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
22 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
23 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
24 #define CONFIG_SYS_INIT_SP_OFFSET \
25 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
26 #define CONFIG_SYS_INIT_SP_ADDR \
27 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
29 #define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
31 #define CONFIG_SYS_BOOTMAPSZ 0x10000000
34 #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
37 #define CONFIG_IMX_HDMI
38 #define CONFIG_IMX_VIDEO_SKIP
42 #define CONFIG_PCI_SCAN_SHOW
43 #define CONFIG_PCIE_IMX
44 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
48 #ifdef CONFIG_CMD_SATA
49 #define CONFIG_SYS_SATA_MAX_DEVICE 1
50 #define CONFIG_DWC_AHSATA_PORT_ID 0
51 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
53 #define CONFIG_SYS_64BIT_LBA
58 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
59 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
60 #ifdef CONFIG_CMD_USB_MASS_STORAGE
61 #define CONFIG_USBD_HS
62 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
63 #endif /* CONFIG_CMD_USB */
65 #define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */
67 #define CONFIG_EXTRA_ENV_SETTINGS \
69 "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
70 "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
71 "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
72 "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
73 "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
74 "${bootargs_mmc3}\0" \
75 "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
76 "rdinit=/sbin/init enable_wait_mode=off\0" \
77 "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
78 "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
79 "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
80 "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
81 "run bootargs_upd; " \
82 "bootm 0x10800000 0x10d00000\0" \
85 "fdt_addr_r=0x18000000\0" \
86 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
87 "kernel_addr_r=0x12000000\0" \
88 "pxefile_addr_r=0x10100000\0" \
89 "ramdisk_addr_r=0x18080000\0" \
90 "scriptaddr=0x10000000\0" \
91 "set_con_serial=setenv stdout serial; " \
92 "setenv stderr serial\0" \
93 "set_con_hdmi=setenv stdout serial,vidconsole; " \
94 "setenv stderr serial,vidconsole\0" \
95 "stderr=serial,vidconsole\0" \
96 "stdin=serial,usbkbd\0" \
97 "stdout=serial,vidconsole\0"
99 /* Enable distro boot */
100 #define BOOT_TARGET_DEVICES(func) \
104 func(SATA, sata, 0) \
107 #include <config_distro_bootcmd.h>
109 #endif /* __TBS2910_CONFIG_H * */