include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* General configuration */
  15 #define CONFIG_SYS_THUMB_BUILD
  16
  17 #define CONFIG_MACH_TYPE                3980
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20
  21 #define CONFIG_SYS_HZ                   1000
  22
  23 #define CONFIG_IMX_THERMAL
  24
  25 /* Physical Memory Map */
  26 #define CONFIG_NR_DRAM_BANKS            1
  27 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  28
  29 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  30 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  31 #define CONFIG_SYS_INIT_SP_OFFSET \
  32         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  33 #define CONFIG_SYS_INIT_SP_ADDR \
  34         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  35
  36 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  37
  38 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  39 #define CONFIG_SYS_MEMTEST_END \
  40         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  41
  42 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  43
  44 /* Serial console */
  45 #define CONFIG_MXC_UART
  46 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  47 #define CONFIG_BAUDRATE                 115200
  48
  49 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  50 #define CONFIG_CONSOLE_MUX
  51 #define CONFIG_CONS_INDEX               1
  52
  53 /* *** Command definition *** */
  54 #define CONFIG_CMD_BMODE
  55 #define CONFIG_CMD_PART
  56
  57 /* Filesystems / image support */
  58 #define CONFIG_EFI_PARTITION
  59 #define CONFIG_PARTITION_UUIDS
  60
  61 /* MMC */
  62 #define CONFIG_SYS_FSL_USDHC_NUM        3
  63 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  64 #define CONFIG_SUPPORT_EMMC_BOOT
  65
  66 /* Ethernet */
  67 #define CONFIG_FEC_MXC
  68 #define CONFIG_FEC_MXC
  69 #define CONFIG_MII
  70 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  71 #define CONFIG_FEC_XCV_TYPE             RGMII
  72 #define CONFIG_ETHPRIME                 "FEC"
  73 #define CONFIG_FEC_MXC_PHYADDR          4
  74 #define CONFIG_PHYLIB
  75 #define CONFIG_PHY_ATHEROS
  76
  77 /* Framebuffer */
  78 #define CONFIG_VIDEO
  79 #ifdef CONFIG_VIDEO
  80 #define CONFIG_VIDEO_IPUV3
  81 #define CONFIG_IPUV3_CLK                260000000
  82 #define CONFIG_CFB_CONSOLE
  83 #define CONFIG_CFB_CONSOLE_ANSI
  84 #define CONFIG_VIDEO_SW_CURSOR
  85 #define CONFIG_VGA_AS_SINGLE_DEVICE
  86 #define CONFIG_VIDEO_BMP_RLE8
  87 #define CONFIG_IMX_HDMI
  88 #define CONFIG_IMX_VIDEO_SKIP
  89 #define CONFIG_CMD_HDMIDETECT
  90 #endif
  91
  92 /* PCI */
  93 #define CONFIG_CMD_PCI
  94 #ifdef CONFIG_CMD_PCI
  95 #define CONFIG_PCI
  96 #define CONFIG_PCI_PNP
  97 #define CONFIG_PCI_SCAN_SHOW
  98 #define CONFIG_PCIE_IMX
  99 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 100 #endif
 101
 102 /* SATA */
 103 #define CONFIG_CMD_SATA
 104 #ifdef CONFIG_CMD_SATA
 105 #define CONFIG_DWC_AHSATA
 106 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 107 #define CONFIG_DWC_AHSATA_PORT_ID       0
 108 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 109 #define CONFIG_LBA48
 110 #define CONFIG_LIBATA
 111 #endif
 112
 113 /* USB */
 114 #ifdef CONFIG_CMD_USB
 115 #define CONFIG_USB_EHCI
 116 #define CONFIG_USB_EHCI_MX6
 117 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 118 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 119 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 120 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 121 #define CONFIG_USBD_HS
 122 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 123 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 124 #define CONFIG_USB_KEYBOARD
 125 #ifdef CONFIG_USB_KEYBOARD
 126 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 127 #define CONFIG_SYS_STDIO_DEREGISTER
 128 #define CONFIG_PREBOOT \
 129         "usb start; " \
 130         "if hdmidet; then " \
 131                 "run set_con_hdmi; " \
 132         "else " \
 133                 "run set_con_serial; " \
 134         "fi;"
 135 #endif /* CONFIG_USB_KEYBOARD */
 136 #endif /* CONFIG_CMD_USB      */
 137
 138 /* RTC */
 139 #define CONFIG_CMD_DATE
 140 #ifdef CONFIG_CMD_DATE
 141 #define CONFIG_RTC_DS1307
 142 #define CONFIG_SYS_RTC_BUS_NUM          2
 143 #endif
 144
 145 /* I2C */
 146 #ifdef CONFIG_CMD_I2C
 147 #define CONFIG_SYS_I2C
 148 #define CONFIG_SYS_I2C_MXC
 149 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 150 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 151 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 152 #define CONFIG_SYS_I2C_SPEED            100000
 153 #define CONFIG_I2C_EDID
 154 #endif
 155
 156 /* Environment organization */
 157 #define CONFIG_ENV_IS_IN_MMC
 158 #define CONFIG_SYS_MMC_ENV_DEV          2 /* overwritten on SD boot */
 159 #define CONFIG_SYS_MMC_ENV_PART         1 /* overwritten on SD boot */
 160 #define CONFIG_ENV_SIZE                 (8 * 1024)
 161 #define CONFIG_ENV_OFFSET               (384 * 1024)
 162 #define CONFIG_ENV_OVERWRITE
 163
 164 #define CONFIG_EXTRA_ENV_SETTINGS \
 165         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 166         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 167                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 168         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 169         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 170                         "${bootargs_mmc3}\0" \
 171         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 172                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 173         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 174                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
 175         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 176         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 177                         "run bootargs_upd; " \
 178                         "bootm 0x10800000 0x10d00000\0" \
 179         "console=ttymxc0\0" \
 180         "fan=gpio set 92\0" \
 181         "set_con_serial=setenv stdout serial; " \
 182                         "setenv stderr serial;\0" \
 183         "set_con_hdmi=setenv stdout serial,vga; " \
 184                         "setenv stderr serial,vga;\0" \
 185         "stderr=serial,vga;\0" \
 186         "stdin=serial,usbkbd;\0" \
 187         "stdout=serial,vga;\0"
 188
 189 #define CONFIG_BOOTCOMMAND \
 190         "mmc rescan; " \
 191         "if run bootcmd_up1; then " \
 192                 "run bootcmd_up2; " \
 193         "else " \
 194                 "run bootcmd_mmc; " \
 195         "fi"
 196
 197 #endif                         /* __TBS2910_CONFIG_H * */