1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Soeren Moch <smoch@web.de>
5 * Configuration settings for the TBS2910 MatrixARM board.
8 #ifndef __TBS2910_CONFIG_H
9 #define __TBS2910_CONFIG_H
11 #include "mx6_common.h"
13 /* General configuration */
15 /* Physical Memory Map */
16 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
18 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
19 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
21 #define CONFIG_SYS_BOOTMAPSZ 0x10000000
24 #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
27 #define CONFIG_IMX_HDMI
28 #define CONFIG_IMX_VIDEO_SKIP
32 #define CONFIG_PCI_SCAN_SHOW
33 #define CONFIG_PCIE_IMX
34 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
38 #ifdef CONFIG_CMD_SATA
39 #define CONFIG_DWC_AHSATA_PORT_ID 0
40 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
42 #define CONFIG_SYS_64BIT_LBA
47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
48 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
49 #ifdef CONFIG_CMD_USB_MASS_STORAGE
50 #define CONFIG_USBD_HS
51 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
52 #endif /* CONFIG_CMD_USB */
54 #define CONFIG_EXTRA_ENV_SETTINGS \
56 "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
57 "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
58 "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
59 "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
60 "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
61 "${bootargs_mmc3}\0" \
62 "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
63 "rdinit=/sbin/init enable_wait_mode=off\0" \
64 "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
65 "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
66 "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
67 "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
68 "run bootargs_upd; " \
69 "bootm 0x10800000 0x10d00000\0" \
72 "fdt_addr_r=0x18000000\0" \
73 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
74 "kernel_addr_r=0x12000000\0" \
75 "pxefile_addr_r=0x10100000\0" \
76 "ramdisk_addr_r=0x18080000\0" \
77 "scriptaddr=0x10000000\0" \
78 "set_con_serial=setenv stdout serial; " \
79 "setenv stderr serial\0" \
80 "set_con_hdmi=setenv stdout serial,vidconsole; " \
81 "setenv stderr serial,vidconsole\0" \
82 "stderr=serial,vidconsole\0" \
83 "stdin=serial,usbkbd\0" \
84 "stdout=serial,vidconsole\0"
86 /* Enable distro boot */
87 #define BOOT_TARGET_DEVICES(func) \
94 #include <config_distro_bootcmd.h>
96 #endif /* __TBS2910_CONFIG_H * */