include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* General configuration */
  15 #define CONFIG_SYS_THUMB_BUILD
  16
  17 #define CONFIG_MACH_TYPE                3980
  18
  19 #define CONFIG_SYS_HZ                   1000
  20
  21 #define CONFIG_IMX_THERMAL
  22
  23 /* Physical Memory Map */
  24 #define CONFIG_NR_DRAM_BANKS            1
  25 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  26
  27 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  28 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  29 #define CONFIG_SYS_INIT_SP_OFFSET \
  30         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  31 #define CONFIG_SYS_INIT_SP_ADDR \
  32         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  33
  34 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  35
  36 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  37 #define CONFIG_SYS_MEMTEST_END \
  38         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  39
  40 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  41
  42 /* Serial console */
  43 #define CONFIG_MXC_UART
  44 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  45 #define CONFIG_BAUDRATE                 115200
  46
  47 #define CONFIG_CONS_INDEX               1
  48
  49 /* *** Command definition *** */
  50 #define CONFIG_CMD_BMODE
  51
  52 /* Filesystems / image support */
  53
  54 /* MMC */
  55 #define CONFIG_SYS_FSL_USDHC_NUM        3
  56 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  57 #define CONFIG_SUPPORT_EMMC_BOOT
  58
  59 /* Ethernet */
  60 #define CONFIG_FEC_MXC
  61 #define CONFIG_FEC_MXC
  62 #define CONFIG_MII
  63 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  64 #define CONFIG_FEC_XCV_TYPE             RGMII
  65 #define CONFIG_ETHPRIME                 "FEC"
  66 #define CONFIG_FEC_MXC_PHYADDR          4
  67 #define CONFIG_PHYLIB
  68 #define CONFIG_PHY_ATHEROS
  69
  70 /* Framebuffer */
  71 #ifdef CONFIG_VIDEO
  72 #define CONFIG_VIDEO_IPUV3
  73 #define CONFIG_IPUV3_CLK                260000000
  74 #define CONFIG_VIDEO_BMP_RLE8
  75 #define CONFIG_IMX_HDMI
  76 #define CONFIG_IMX_VIDEO_SKIP
  77 #define CONFIG_CMD_HDMIDETECT
  78 #endif
  79
  80 /* PCI */
  81 #define CONFIG_CMD_PCI
  82 #ifdef CONFIG_CMD_PCI
  83 #define CONFIG_PCI_SCAN_SHOW
  84 #define CONFIG_PCIE_IMX
  85 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  86 #endif
  87
  88 /* SATA */
  89 #define CONFIG_CMD_SATA
  90 #ifdef CONFIG_CMD_SATA
  91 #define CONFIG_DWC_AHSATA
  92 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  93 #define CONFIG_DWC_AHSATA_PORT_ID       0
  94 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  95 #define CONFIG_LBA48
  96 #define CONFIG_LIBATA
  97 #endif
  98
  99 /* USB */
 100 #ifdef CONFIG_CMD_USB
 101 #define CONFIG_USB_EHCI
 102 #define CONFIG_USB_EHCI_MX6
 103 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 104 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 105 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 106 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 107 #define CONFIG_USBD_HS
 108 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 109 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 110 #ifdef CONFIG_USB_KEYBOARD
 111 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 112 #define CONFIG_PREBOOT \
 113         "usb start; " \
 114         "if hdmidet; then " \
 115                 "run set_con_hdmi; " \
 116         "else " \
 117                 "run set_con_serial; " \
 118         "fi;"
 119 #endif /* CONFIG_USB_KEYBOARD */
 120 #endif /* CONFIG_CMD_USB      */
 121
 122 /* RTC */
 123 #define CONFIG_CMD_DATE
 124 #ifdef CONFIG_CMD_DATE
 125 #define CONFIG_RTC_DS1307
 126 #define CONFIG_SYS_RTC_BUS_NUM          2
 127 #endif
 128
 129 /* I2C */
 130 #ifdef CONFIG_CMD_I2C
 131 #define CONFIG_SYS_I2C
 132 #define CONFIG_SYS_I2C_MXC
 133 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 134 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 135 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 136 #define CONFIG_SYS_I2C_SPEED            100000
 137 #define CONFIG_I2C_EDID
 138 #endif
 139
 140 /* Environment organization */
 141 #define CONFIG_ENV_IS_IN_MMC
 142 #define CONFIG_SYS_MMC_ENV_DEV          2 /* overwritten on SD boot */
 143 #define CONFIG_SYS_MMC_ENV_PART         1 /* overwritten on SD boot */
 144 #define CONFIG_ENV_SIZE                 (8 * 1024)
 145 #define CONFIG_ENV_OFFSET               (384 * 1024)
 146 #define CONFIG_ENV_OVERWRITE
 147
 148 #define CONFIG_EXTRA_ENV_SETTINGS \
 149         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 150         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 151                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 152         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 153         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 154                         "${bootargs_mmc3}\0" \
 155         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 156                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 157         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 158                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
 159         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 160         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 161                         "run bootargs_upd; " \
 162                         "bootm 0x10800000 0x10d00000\0" \
 163         "console=ttymxc0\0" \
 164         "fan=gpio set 92\0" \
 165         "set_con_serial=setenv stdout serial; " \
 166                         "setenv stderr serial;\0" \
 167         "set_con_hdmi=setenv stdout serial,vga; " \
 168                         "setenv stderr serial,vga;\0" \
 169         "stderr=serial,vga;\0" \
 170         "stdin=serial,usbkbd;\0" \
 171         "stdout=serial,vga;\0"
 172
 173 #define CONFIG_BOOTCOMMAND \
 174         "mmc rescan; " \
 175         "if run bootcmd_up1; then " \
 176                 "run bootcmd_up2; " \
 177         "else " \
 178                 "run bootcmd_mmc; " \
 179         "fi"
 180
 181 #endif                         /* __TBS2910_CONFIG_H * */