arm: spear: Add BCH4 SW support to SPEAr600 x600 board
[platform/kernel/u-boot.git] / include / configs / tb100.h
1 /*
2  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9
10 #include <linux/sizes.h>
11
12 /*
13  *  CPU configuration
14  */
15 #define CONFIG_SYS_TIMER_RATE           CONFIG_SYS_CLK_FREQ
16
17 /*
18  * Memory configuration
19  */
20 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
21
22 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
23 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
24 #define CONFIG_SYS_SDRAM_SIZE           SZ_128M
25
26 #define CONFIG_SYS_INIT_SP_ADDR         \
27         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
28
29 #define CONFIG_SYS_MALLOC_LEN           SZ_128K
30 #define CONFIG_SYS_BOOTM_LEN            SZ_32M
31 #define CONFIG_SYS_LOAD_ADDR            0x82000000
32
33 #define CONFIG_SYS_NO_FLASH
34
35 /*
36  * UART configuration
37  */
38 #define CONFIG_DW_SERIAL
39 #define CONFIG_SYS_NS16550
40 #define CONFIG_SYS_NS16550_SERIAL
41 #define CONFIG_SYS_NS16550_CLK          166666666
42 #define CONFIG_BAUDRATE                 115200
43
44 /*
45  * Ethernet PHY configuration
46  */
47 #define CONFIG_PHYLIB
48 #define CONFIG_PHY_GIGE
49
50 /*
51  * Even though the board houses Realtek RTL8211E PHY
52  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
53  * In particular "parse_status" reports link is down.
54  *
55  * Until Realtek PHY driver is fixed fall back to generic PHY driver
56  * which implements all required functionality and behaves much more stable.
57  *
58  * #define CONFIG_PHY_REALTEK
59  *
60  */
61
62 /*
63  * Ethernet configuration
64  */
65 #define ETH0_BASE_ADDRESS               0xFE100000
66 #define ETH1_BASE_ADDRESS               0xFE110000
67
68 /*
69  * Command line configuration
70  */
71 #define CONFIG_CMD_DHCP
72 #define CONFIG_CMD_ELF
73 #define CONFIG_CMD_PING
74
75 #define CONFIG_OF_LIBFDT
76
77 #define CONFIG_AUTO_COMPLETE
78 #define CONFIG_SYS_MAXARGS              16
79
80 /*
81  * Environment settings
82  */
83 #define CONFIG_ENV_IS_NOWHERE
84 #define CONFIG_ENV_SIZE                 SZ_2K
85 #define CONFIG_ENV_OFFSET               0
86
87 /*
88  * Environment configuration
89  */
90 #define CONFIG_BOOTDELAY                3
91 #define CONFIG_BOOTFILE                 "uImage"
92 #define CONFIG_BOOTARGS                 "console=ttyS0,115200n8"
93 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
94
95 /*
96  * Console configuration
97  */
98 #define CONFIG_SYS_LONGHELP
99 #define CONFIG_SYS_CBSIZE               256
100 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
101 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
102                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
103
104 #endif /* _CONFIG_TB100_H_ */