include/configs/taurus.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards
   4  * (C) Copyright 2013 Siemens AG
   5  *
   6  * Based on:
   7  * U-Boot file: include/configs/at91sam9260ek.h
   8  *
   9  * (C) Copyright 2007-2008
  10  * Stelian Pop <stelian@popies.net>
  11  * Lead Tech Design <www.leadtechdesign.com>
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 /*
  18  * SoC must be defined first, before hardware.h is included.
  19  * In this case SoC is defined in boards.cfg.
  20  */
  21 #include <asm/hardware.h>
  22 #include <linux/sizes.h>
  23
  24 /*
  25  * Warning: changing CONFIG_SYS_TEXT_BASE requires
  26  * adapting the initial boot program.
  27  * Since the linker has to swallow that define, we must use a pure
  28  * hex number here!
  29  */
  30
  31 /* ARM asynchronous clock */
  32 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  33 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* main clock xtal */
  34
  35 /* Misc CPU related */
  36 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  37 #define CONFIG_SETUP_MEMORY_TAGS
  38 #define CONFIG_INITRD_TAG
  39
  40 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
  41
  42 /* general purpose I/O */
  43 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  44 #define CONFIG_AT91_GPIO
  45 #define CONFIG_AT91_GPIO_PULLUP 1       /* keep pullups on peripheral pins */
  46
  47 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  48 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  49
  50 /*
  51  * SDRAM: 1 bank, min 32, max 128 MB
  52  * Initialized before u-boot gets started.
  53  */
  54 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
  55 #define CONFIG_SYS_SDRAM_SIZE           (128 * SZ_1M)
  56
  57 /*
  58  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
  59  * leaving the correct space for initial global data structure above
  60  * that address while providing maximum stack area below.
  61  */
  62 #define CONFIG_SYS_INIT_SP_ADDR \
  63         (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
  64
  65 /* NAND flash */
  66 #ifdef CONFIG_CMD_NAND
  67 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  68 #define CONFIG_SYS_NAND_BASE            ATMEL_BASE_CS3
  69 #define CONFIG_SYS_NAND_DBW_8
  70 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  71 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  72 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PC14
  73 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PC13
  74 #endif
  75
  76 /* Ethernet */
  77 #define CONFIG_MACB
  78 #define CONFIG_RMII
  79 #define CONFIG_AT91_WANTS_COMMON_PHY
  80
  81 /* USB */
  82 #if defined(CONFIG_BOARD_TAURUS)
  83 #define CONFIG_USB_ATMEL
  84 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
  85 #define CONFIG_USB_OHCI_NEW
  86 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  87 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000
  88 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9260"
  89 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
  90
  91 /* USB DFU support */
  92
  93 #define CONFIG_USB_GADGET_AT91
  94
  95 /* DFU class support */
  96 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (SZ_1M)
  97 #define DFU_MANIFEST_POLL_TIMEOUT       25000
  98 #endif
  99
 100 /* SPI EEPROM */
 101 #define TAURUS_SPI_MASK (1 << 4)
 102
 103 #if defined(CONFIG_SPL_BUILD)
 104 /* SPL related */
 105 #endif
 106
 107 /* load address */
 108 #define CONFIG_SYS_LOAD_ADDR                    0x22000000
 109
 110 /* bootstrap in spi flash , u-boot + env + linux in nandflash */
 111 #define CONFIG_ENV_OFFSET_REDUND        0x180000
 112
 113 #ifndef CONFIG_SPL_BUILD
 114 #if defined(CONFIG_BOARD_AXM)
 115 #define CONFIG_EXTRA_ENV_SETTINGS \
 116         "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
 117                 "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \
 118         "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \
 119         "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \
 120         "boot_retries=0\0" \
 121         "ethact=macb0\0" \
 122         "flash_nfs=run nand_kernel;run nfsargs;run addip;" \
 123                 "upgrade_available;bootm ${kernel_ram};reset\0" \
 124         "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \
 125                 "bootm ${kernel_ram};reset\0" \
 126         "flash_self_test=run nand_kernel;run setbootargs addtest;" \
 127                 "upgrade_available;bootm ${kernel_ram};reset\0" \
 128         "hostname=systemone\0" \
 129         "kernel_Off=0x00200000\0" \
 130         "kernel_Off_fallback=0x03800000\0" \
 131         "kernel_ram=0x21500000\0" \
 132         "kernel_size=0x00400000\0" \
 133         "kernel_size_fallback=0x00400000\0" \
 134         "loads_echo=1\0" \
 135         "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \
 136                 "${kernel_size}\0" \
 137         "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \
 138                 "run nfsargs;run addip;upgrade_available;" \
 139                 "bootm ${kernel_ram};reset\0" \
 140         "netdev=eth0\0" \
 141         "nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs " \
 142                 "rw nfsroot=${serverip}:${rootpath} " \
 143                 "at91sam9_wdt.wdt_timeout=16\0" \
 144         "partitionset_active=A\0" \
 145         "preboot=echo;echo Type 'run flash_self' to use kernel and root " \
 146                 "filesystem on memory;echo Type 'run flash_nfs' to use " \
 147                 "kernel from memory and root filesystem over NFS;echo Type " \
 148                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 149                 "filesystem over NFS;echo\0" \
 150         "project_dir=systemone\0" \
 151         "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0" \
 152         "rootfs=/dev/mtdblock5\0" \
 153         "rootfs_fallback=/dev/mtdblock7\0" \
 154         "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops " \
 155                 "root=${rootfs} rootfstype=jffs2 panic=7 " \
 156                 "at91sam9_wdt.wdt_timeout=16\0" \
 157         "stderr=serial\0" \
 158         "stdin=serial\0" \
 159         "stdout=serial\0" \
 160         "upgrade_available=0\0"
 161 #endif
 162 #endif /* #ifndef CONFIG_SPL_BUILD */
 163 /*
 164  * Size of malloc() pool
 165  */
 166 #define CONFIG_SYS_MALLOC_LEN \
 167         ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000)
 168
 169 /* Defines for SPL */
 170 #define CONFIG_SPL_MAX_SIZE             (31 * SZ_512)
 171 #define CONFIG_SPL_STACK                (ATMEL_BASE_SRAM1 + SZ_16K)
 172 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 173                                         CONFIG_SYS_MALLOC_LEN)
 174 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 175
 176 #define CONFIG_SPL_BSS_START_ADDR       CONFIG_SPL_MAX_SIZE
 177 #define CONFIG_SPL_BSS_MAX_SIZE         (3 * SZ_512)
 178
 179 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL  (2*32 + 14)
 180 #define CONFIG_SYS_USE_NANDFLASH        1
 181 #define CONFIG_SPL_NAND_DRIVERS
 182 #define CONFIG_SPL_NAND_BASE
 183 #define CONFIG_SPL_NAND_ECC
 184 #define CONFIG_SPL_NAND_RAW_ONLY
 185 #define CONFIG_SPL_NAND_SOFTECC
 186 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 187 #define CONFIG_SYS_NAND_U_BOOT_SIZE     SZ_512K
 188 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 189 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 190 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 191
 192 #define CONFIG_SYS_NAND_SIZE            (256 * SZ_1M)
 193 #define CONFIG_SYS_NAND_PAGE_SIZE       SZ_2K
 194 #define CONFIG_SYS_NAND_BLOCK_SIZE      (SZ_128K)
 195 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 196                                          CONFIG_SYS_NAND_PAGE_SIZE)
 197 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 198 #define CONFIG_SYS_NAND_ECCSIZE         256
 199 #define CONFIG_SYS_NAND_ECCBYTES        3
 200 #define CONFIG_SYS_NAND_OOBSIZE         64
 201 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
 202                                           48, 49, 50, 51, 52, 53, 54, 55, \
 203                                           56, 57, 58, 59, 60, 61, 62, 63, }
 204
 205 #define CONFIG_SPL_ATMEL_SIZE
 206 #define CONFIG_SYS_MASTER_CLOCK         132096000
 207 #define AT91_PLL_LOCK_TIMEOUT           1000000
 208 #define CONFIG_SYS_AT91_PLLA            0x202A3F01
 209 #define CONFIG_SYS_MCKR                 0x1300
 210 #define CONFIG_SYS_MCKR_CSS             (0x02 | CONFIG_SYS_MCKR)
 211 #define CONFIG_SYS_AT91_PLLB            0x10193F05
 212
 213 #define CONFIG_SPL_PAD_TO               CONFIG_SYS_NAND_U_BOOT_OFFS
 214 #define CONFIG_SYS_SPL_LEN              CONFIG_SPL_PAD_TO
 215
 216 #endif