include/configs/taishan.h

   1 /*
   2  * (C) Copyright 2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /************************************************************************
   9  * TAISHAN.h - configuration for AMCC 440GX Ref
  10  ***********************************************************************/
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*-----------------------------------------------------------------------
  16  * High Level Configuration Options
  17  *----------------------------------------------------------------------*/
  18 #define CONFIG_TAISHAN          1       /* Board is taishan             */
  19 #define CONFIG_440GX            1       /* Specifc GX support           */
  20 #define CONFIG_440              1       /* ... PPC440 family            */
  21 #define CONFIG_SYS_CLK_FREQ     33333333 /* external freq to pll        */
  22
  23 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  24
  25 /*
  26  * Include common defines/options for all AMCC eval boards
  27  */
  28 #define CONFIG_HOSTNAME         taishan
  29 #define CONFIG_USE_TTY          ttyS1
  30 #include "amcc-common.h"
  31
  32 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_pre_init          */
  33 #define CONFIG_MISC_INIT_R      1       /* Call misc_init_r             */
  34
  35 /*-----------------------------------------------------------------------
  36  * Base addresses -- Note these are effective addresses where the
  37  * actual resources get mapped (not physical addresses)
  38  *----------------------------------------------------------------------*/
  39 #define CONFIG_SYS_FLASH_BASE           0xfc000000      /* start of FLASH       */
  40 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped pci memory    */
  41 #define CONFIG_SYS_ISRAM_BASE           0xc0000000      /* internal SRAM        */
  42 #define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs    */
  43
  44 #define CONFIG_SYS_EBC0_FLASH_BASE      CONFIG_SYS_FLASH_BASE
  45 #define CONFIG_SYS_EBC1_FPGA_BASE       (CONFIG_SYS_PERIPHERAL_BASE + 0x01000000)
  46 #define CONFIG_SYS_EBC2_LCM_BASE        (CONFIG_SYS_PERIPHERAL_BASE + 0x02000000)
  47 #define CONFIG_SYS_EBC3_CONN_BASE       (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
  48
  49 #define CONFIG_SYS_GPIO_BASE            (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
  50
  51 /*-----------------------------------------------------------------------
  52  * Initial RAM & stack pointer (placed in internal SRAM)
  53  *----------------------------------------------------------------------*/
  54 #define CONFIG_SYS_TEMP_STACK_OCM       1
  55 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_ISRAM_BASE
  56 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_ISRAM_BASE  /* Initial RAM address   */
  57 #define CONFIG_SYS_INIT_RAM_SIZE        0x2000          /* Size of used area in RAM*/
  58
  59 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  60 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
  61
  62 /*-----------------------------------------------------------------------
  63  * Serial Port
  64  *----------------------------------------------------------------------*/
  65 #define CONFIG_CONS_INDEX       2       /* Use UART1                    */
  66 #define CONFIG_SYS_EXT_SERIAL_CLOCK     (1843200 * 6)   /* Ext clk @ 11.059 MHz */
  67
  68 /*-----------------------------------------------------------------------
  69  * Environment
  70  *----------------------------------------------------------------------*/
  71 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
  72
  73 /*-----------------------------------------------------------------------
  74  * FLASH related
  75  *----------------------------------------------------------------------*/
  76 #define CONFIG_SYS_FLASH_CFI
  77 #define CONFIG_FLASH_CFI_DRIVER
  78 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
  79 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
  80
  81 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
  82 #define CONFIG_SYS_MAX_FLASH_BANKS     1                    /* number of banks      */
  83 #define CONFIG_SYS_MAX_FLASH_SECT       1024                /* sectors per device   */
  84
  85 #undef  CONFIG_SYS_FLASH_CHECKSUM
  86 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
  87 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
  88
  89 #define CONFIG_ENV_SECT_SIZE    0x40000 /* size of one complete sector  */
  90 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
  91 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
  92
  93 /* Address and size of Redundant Environment Sector     */
  94 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
  95 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
  96
  97 /*-----------------------------------------------------------------------
  98  * E2PROM bootstrap configure value
  99  *----------------------------------------------------------------------*/
 100
 101 /*
 102  * 800/133/66
 103  * IIC 0~15: 86 78 11 6a 61 A7 04 62 00 00 00 00 00 00 00 00
 104  */
 105
 106 /*
 107  * 800/160/80
 108  * IIC 0~15: 86 78 c1 a6 09 67 04 63 00 00 00 00 00 00 00 00
 109  */
 110
 111 /*-----------------------------------------------------------------------
 112  * DDR SDRAM
 113  *----------------------------------------------------------------------*/
 114 #undef CONFIG_SPD_EEPROM                /* Don't use SPD EEPROM for setup       */
 115 #define CONFIG_SDRAM_BANK0      1       /* init onboard DDR SDRAM bank 0        */
 116 #define CONFIG_SYS_SDRAM0_TR0           0xC10A401A
 117 #undef CONFIG_SDRAM_ECC                 /* enable ECC support                   */
 118
 119 /*-----------------------------------------------------------------------
 120  * I2C
 121  *----------------------------------------------------------------------*/
 122 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 123
 124 #undef CONFIG_SYS_I2C_MULTI_EEPROMS
 125 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 126 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 127 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 128 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 129
 130 #define CONFIG_SYS_BOOTSTRAP_IIC_ADDR   0x50
 131
 132 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 133 #define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
 134 #define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
 135 #define CONFIG_SYS_DTT_MAX_TEMP 70
 136 #define CONFIG_SYS_DTT_LOW_TEMP -30
 137 #define CONFIG_SYS_DTT_HYSTERESIS       3
 138
 139 /*
 140  * Default environment variables
 141  */
 142 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 143         CONFIG_AMCC_DEF_ENV                                             \
 144         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 145         CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
 146         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 147         "kernel_addr=fc000000\0"                                        \
 148         "ramdisk_addr=fc180000\0"                                       \
 149         "kozio=bootm 0xffe00000\0"                                      \
 150         ""
 151
 152 /*-----------------------------------------------------------------------
 153  * Networking
 154  *----------------------------------------------------------------------*/
 155 #define CONFIG_EMAC_NR_START    2       /* start with EMAC 2 (skip 0&1) */
 156 #define CONFIG_PHY_ADDR         0xff         /* no phy on EMAC0         */
 157 #define CONFIG_PHY1_ADDR        0xff         /* no phy on EMAC1         */
 158 #define CONFIG_PHY2_ADDR        0x1
 159 #define CONFIG_PHY3_ADDR        0x3
 160 #define CONFIG_ET1011C_PHY      1
 161 #define CONFIG_HAS_ETH0
 162 #define CONFIG_HAS_ETH1
 163 #define CONFIG_HAS_ETH2
 164 #define CONFIG_HAS_ETH3
 165 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 166 #define CONFIG_PHY_RESET        1       /* reset phy upon startup         */
 167 #define CONFIG_PHY_RESET_DELAY  1000
 168
 169 /*
 170  * Commands additional to the ones defined in amcc-common.h
 171  */
 172 #define CONFIG_CMD_DTT
 173 #define CONFIG_CMD_PCI
 174
 175 /*-----------------------------------------------------------------------
 176  * PCI stuff
 177  *-----------------------------------------------------------------------
 178  */
 179 /* General PCI */
 180 #define CONFIG_PCI                      /* include pci support          */
 181 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 182 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 183 #define CONFIG_EEPRO100       1         /* include PCI EEPRO100         */
 184 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 185 #define CONFIG_SYS_PCI_TARGBASE    0x80000000   /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 186
 187 /* Board-specific PCI */
 188 #define CONFIG_SYS_PCI_TARGET_INIT              /* let board init pci target    */
 189
 190 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8   /* AMCC */
 191 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
 192
 193 #endif  /* __CONFIG_H */