include/configs/t4qds.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #ifdef CONFIG_RAMBOOT_PBL
  30 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  32 #define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
  33 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
  34 #endif
  35
  36 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  37 /* Set 1M boot space */
  38 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  39 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  40                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  41 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  42 #define CONFIG_SYS_NO_FLASH
  43 #endif
  44
  45 #define CONFIG_CMD_REGINFO
  46
  47 /* High Level Configuration Options */
  48 #define CONFIG_BOOKE
  49 #define CONFIG_E500                     /* BOOKE e500 family */
  50 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  51 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  52 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  53 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  54 #define CONFIG_MP                       /* support multiple processors */
  55
  56 #ifndef CONFIG_SYS_TEXT_BASE
  57 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  58 #endif
  59
  60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  61 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  62 #endif
  63
  64 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  65 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  66 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  67 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  68 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  69 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  70 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  71 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  72 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  73
  74 #define CONFIG_SYS_SRIO
  75 #define CONFIG_SRIO1                    /* SRIO port 1 */
  76 #define CONFIG_SRIO2                    /* SRIO port 2 */
  77 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  78
  79 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  80
  81 #define CONFIG_ENV_OVERWRITE
  82
  83 #ifdef CONFIG_SYS_NO_FLASH
  84 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  85 #define CONFIG_ENV_IS_NOWHERE
  86 #endif
  87 #else
  88 #define CONFIG_FLASH_CFI_DRIVER
  89 #define CONFIG_SYS_FLASH_CFI
  90 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  91 #endif
  92
  93 #if defined(CONFIG_SPIFLASH)
  94 #define CONFIG_SYS_EXTRA_ENV_RELOC
  95 #define CONFIG_ENV_IS_IN_SPI_FLASH
  96 #define CONFIG_ENV_SPI_BUS              0
  97 #define CONFIG_ENV_SPI_CS               0
  98 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  99 #define CONFIG_ENV_SPI_MODE             0
 100 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 101 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 102 #define CONFIG_ENV_SECT_SIZE            0x10000
 103 #elif defined(CONFIG_SDCARD)
 104 #define CONFIG_SYS_EXTRA_ENV_RELOC
 105 #define CONFIG_ENV_IS_IN_MMC
 106 #define CONFIG_SYS_MMC_ENV_DEV          0
 107 #define CONFIG_ENV_SIZE                 0x2000
 108 #define CONFIG_ENV_OFFSET               (512 * 1097)
 109 #elif defined(CONFIG_NAND)
 110 #define CONFIG_SYS_EXTRA_ENV_RELOC
 111 #define CONFIG_ENV_IS_IN_NAND
 112 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 113 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 114 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 115 #define CONFIG_ENV_IS_IN_REMOTE
 116 #define CONFIG_ENV_ADDR         0xffe20000
 117 #define CONFIG_ENV_SIZE         0x2000
 118 #elif defined(CONFIG_ENV_IS_NOWHERE)
 119 #define CONFIG_ENV_SIZE         0x2000
 120 #else
 121 #define CONFIG_ENV_IS_IN_FLASH
 122 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 123 #define CONFIG_ENV_SIZE         0x2000
 124 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 125 #endif
 126
 127 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 128 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 129
 130 #ifndef __ASSEMBLY__
 131 unsigned long get_board_sys_clk(void);
 132 unsigned long get_board_ddr_clk(void);
 133 #endif
 134
 135 /*
 136  * These can be toggled for performance analysis, otherwise use default.
 137  */
 138 #define CONFIG_SYS_CACHE_STASHING
 139 #define CONFIG_BTB                      /* toggle branch predition */
 140 #define CONFIG_DDR_ECC
 141 #ifdef CONFIG_DDR_ECC
 142 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 143 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 144 #endif
 145
 146 #define CONFIG_ENABLE_36BIT_PHYS
 147
 148 #ifdef CONFIG_PHYS_64BIT
 149 #define CONFIG_ADDR_MAP
 150 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 151 #endif
 152
 153 #if 0
 154 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 155 #endif
 156 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 157 #define CONFIG_SYS_MEMTEST_END          0x00400000
 158 #define CONFIG_SYS_ALT_MEMTEST
 159 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 160
 161 /*
 162  *  Config the L3 Cache as L3 SRAM
 163  */
 164 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 165
 166 #ifdef CONFIG_PHYS_64BIT
 167 #define CONFIG_SYS_DCSRBAR              0xf0000000
 168 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 169 #endif
 170
 171 /* EEPROM */
 172 #define CONFIG_ID_EEPROM
 173 #define CONFIG_SYS_I2C_EEPROM_NXID
 174 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 175 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 176 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 177
 178 /*
 179  * DDR Setup
 180  */
 181 #define CONFIG_VERY_BIG_RAM
 182 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 183 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 184
 185 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 186 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 187 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 188 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 189
 190 #define CONFIG_DDR_SPD
 191 #define CONFIG_FSL_DDR3
 192
 193 #define CONFIG_SYS_SPD_BUS_NUM  0
 194 #define SPD_EEPROM_ADDRESS1     0x51
 195 #define SPD_EEPROM_ADDRESS2     0x52
 196 #define SPD_EEPROM_ADDRESS3     0x53
 197 #define SPD_EEPROM_ADDRESS4     0x54
 198 #define SPD_EEPROM_ADDRESS5     0x55
 199 #define SPD_EEPROM_ADDRESS6     0x56
 200 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 201 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 202
 203 /*
 204  * IFC Definitions
 205  */
 206 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 207 #ifdef CONFIG_PHYS_64BIT
 208 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 209 #else
 210 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 211 #endif
 212
 213 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 214 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 215                                 + 0x8000000) | \
 216                                 CSPR_PORT_SIZE_16 | \
 217                                 CSPR_MSEL_NOR | \
 218                                 CSPR_V)
 219 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 220 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 221                                 CSPR_PORT_SIZE_16 | \
 222                                 CSPR_MSEL_NOR | \
 223                                 CSPR_V)
 224 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 225 /* NOR Flash Timing Params */
 226 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 227
 228 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 229                                 FTIM0_NOR_TEADC(0x5) | \
 230                                 FTIM0_NOR_TEAHC(0x5))
 231 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 232                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 233                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 234 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 235                                 FTIM2_NOR_TCH(0x4) | \
 236                                 FTIM2_NOR_TWPH(0x0E) | \
 237                                 FTIM2_NOR_TWP(0x1c))
 238 #define CONFIG_SYS_NOR_FTIM3    0x0
 239
 240 #define CONFIG_SYS_FLASH_QUIET_TEST
 241 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 242
 243 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 244 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 245 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 246 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 247
 248 #define CONFIG_SYS_FLASH_EMPTY_INFO
 249 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 250                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 251
 252 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 253 #define QIXIS_BASE                      0xffdf0000
 254 #define QIXIS_LBMAP_SWITCH              6
 255 #define QIXIS_LBMAP_MASK                0x0f
 256 #define QIXIS_LBMAP_SHIFT               0
 257 #define QIXIS_LBMAP_DFLTBANK            0x00
 258 #define QIXIS_LBMAP_ALTBANK             0x04
 259 #define QIXIS_RST_CTL_RESET             0x83
 260 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 261 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 262 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 263 #ifdef CONFIG_PHYS_64BIT
 264 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 265 #else
 266 #define QIXIS_BASE_PHYS         QIXIS_BASE
 267 #endif
 268
 269 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 270 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 271                                 | CSPR_PORT_SIZE_8 \
 272                                 | CSPR_MSEL_GPCM \
 273                                 | CSPR_V)
 274 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 275 #define CONFIG_SYS_CSOR3        0x0
 276 /* QIXIS Timing parameters for IFC CS3 */
 277 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 278                                         FTIM0_GPCM_TEADC(0x0e) | \
 279                                         FTIM0_GPCM_TEAHC(0x0e))
 280 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 281                                         FTIM1_GPCM_TRAD(0x3f))
 282 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 283                                         FTIM2_GPCM_TCH(0x0) | \
 284                                         FTIM2_GPCM_TWP(0x1f))
 285 #define CONFIG_SYS_CS3_FTIM3            0x0
 286
 287 /* NAND Flash on IFC */
 288 #define CONFIG_NAND_FSL_IFC
 289 #define CONFIG_SYS_NAND_BASE            0xff800000
 290 #ifdef CONFIG_PHYS_64BIT
 291 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 292 #else
 293 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 294 #endif
 295
 296 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 297 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 298                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 299                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 300                                 | CSPR_V)
 301 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 302
 303 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 304                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 305                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 306                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 307                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 308                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 309                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 310
 311 #define CONFIG_SYS_NAND_ONFI_DETECTION
 312
 313 /* ONFI NAND Flash mode0 Timing Params */
 314 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 315                                         FTIM0_NAND_TWP(0x18)   | \
 316                                         FTIM0_NAND_TWCHT(0x07) | \
 317                                         FTIM0_NAND_TWH(0x0a))
 318 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 319                                         FTIM1_NAND_TWBE(0x39)  | \
 320                                         FTIM1_NAND_TRR(0x0e)   | \
 321                                         FTIM1_NAND_TRP(0x18))
 322 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 323                                         FTIM2_NAND_TREH(0x0a) | \
 324                                         FTIM2_NAND_TWHRE(0x1e))
 325 #define CONFIG_SYS_NAND_FTIM3           0x0
 326
 327 #define CONFIG_SYS_NAND_DDR_LAW         11
 328
 329 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 330 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 331 #define CONFIG_MTD_NAND_VERIFY_WRITE
 332 #define CONFIG_CMD_NAND
 333
 334 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 335
 336 #if defined(CONFIG_NAND)
 337 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 338 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 339 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 340 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 341 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 342 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 343 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 344 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 345 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 346 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 347 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 348 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 349 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 350 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 351 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 352 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 353 #else
 354 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 355 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 356 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 357 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 358 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 359 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 360 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 361 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 362 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 363 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 364 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 365 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 366 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 367 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 368 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 369 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 370 #endif
 371 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 372 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 373 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 374 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 375 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 376 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 377 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 378 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 379
 380 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 381
 382 #if defined(CONFIG_RAMBOOT_PBL)
 383 #define CONFIG_SYS_RAMBOOT
 384 #endif
 385
 386 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 387 #define CONFIG_MISC_INIT_R
 388
 389 #define CONFIG_HWCONFIG
 390
 391 /* define to use L1 as initial stack */
 392 #define CONFIG_L1_INIT_RAM
 393 #define CONFIG_SYS_INIT_RAM_LOCK
 394 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 395 #ifdef CONFIG_PHYS_64BIT
 396 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 397 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 398 /* The assembler doesn't like typecast */
 399 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 400         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 401           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 402 #else
 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 404 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 405 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 406 #endif
 407 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 408
 409 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 410                                         GENERATED_GBL_DATA_SIZE)
 411 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 412
 413 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 414 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 415
 416 /* Serial Port - controlled on board with jumper J8
 417  * open - index 2
 418  * shorted - index 1
 419  */
 420 #define CONFIG_CONS_INDEX       1
 421 #define CONFIG_SYS_NS16550
 422 #define CONFIG_SYS_NS16550_SERIAL
 423 #define CONFIG_SYS_NS16550_REG_SIZE     1
 424 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 425
 426 #define CONFIG_SYS_BAUDRATE_TABLE       \
 427         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 428
 429 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 430 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 431 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 432 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 433
 434 /* Use the HUSH parser */
 435 #define CONFIG_SYS_HUSH_PARSER
 436 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 437
 438 /* pass open firmware flat tree */
 439 #define CONFIG_OF_LIBFDT
 440 #define CONFIG_OF_BOARD_SETUP
 441 #define CONFIG_OF_STDOUT_VIA_ALIAS
 442
 443 /* new uImage format support */
 444 #define CONFIG_FIT
 445 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 446
 447 /* I2C */
 448 #define CONFIG_SYS_I2C
 449 #define CONFIG_SYS_I2C_FSL
 450 #define CONFIG_SYS_FSL_I2C_SPEED        100000
 451 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 452 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 453 #define CONFIG_SYS_FSL_I2C2_SPEED       100000
 454 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 455 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 456
 457 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 458 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 459
 460 #define I2C_MUX_CH_DEFAULT      0x8
 461 #define I2C_MUX_CH_VOL_MONITOR  0xa
 462 #define I2C_MUX_CH_VSC3316_FS   0xc
 463 #define I2C_MUX_CH_VSC3316_BS   0xd
 464
 465 /* Voltage monitor on channel 2*/
 466 #define I2C_VOL_MONITOR_ADDR            0x40
 467 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 468 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 469 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 470
 471 /* VSC Crossbar switches */
 472 #define CONFIG_VSC_CROSSBAR
 473 #define VSC3316_FSM_TX_ADDR     0x70
 474 #define VSC3316_FSM_RX_ADDR     0x71
 475
 476 /*
 477  * RapidIO
 478  */
 479 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 480 #ifdef CONFIG_PHYS_64BIT
 481 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 482 #else
 483 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 484 #endif
 485 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 486
 487 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 488 #ifdef CONFIG_PHYS_64BIT
 489 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 490 #else
 491 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 492 #endif
 493 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 494
 495 /*
 496  * for slave u-boot IMAGE instored in master memory space,
 497  * PHYS must be aligned based on the SIZE
 498  */
 499 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 500 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 501 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 502 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 503 /*
 504  * for slave UCODE and ENV instored in master memory space,
 505  * PHYS must be aligned based on the SIZE
 506  */
 507 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 508 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 509 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 510
 511 /* slave core release by master*/
 512 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 513 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 514
 515 /*
 516  * SRIO_PCIE_BOOT - SLAVE
 517  */
 518 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 519 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 520 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 521                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 522 #endif
 523 /*
 524  * eSPI - Enhanced SPI
 525  */
 526 #define CONFIG_FSL_ESPI
 527 #define CONFIG_SPI_FLASH
 528 #define CONFIG_SPI_FLASH_SST
 529 #define CONFIG_CMD_SF
 530 #define CONFIG_SF_DEFAULT_SPEED         10000000
 531 #define CONFIG_SF_DEFAULT_MODE          0
 532
 533 /*
 534  * General PCI
 535  * Memory space is mapped 1-1, but I/O space must start from 0.
 536  */
 537
 538 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 539 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 540 #ifdef CONFIG_PHYS_64BIT
 541 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 542 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 543 #else
 544 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 545 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 546 #endif
 547 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 548 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 549 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 550 #ifdef CONFIG_PHYS_64BIT
 551 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 552 #else
 553 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 554 #endif
 555 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 556
 557 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 558 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 559 #ifdef CONFIG_PHYS_64BIT
 560 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 561 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 562 #else
 563 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 564 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 565 #endif
 566 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 567 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 568 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 569 #ifdef CONFIG_PHYS_64BIT
 570 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 571 #else
 572 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 573 #endif
 574 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 575
 576 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 577 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 578 #ifdef CONFIG_PHYS_64BIT
 579 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 580 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 581 #else
 582 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 583 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 584 #endif
 585 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 586 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 587 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 588 #ifdef CONFIG_PHYS_64BIT
 589 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 590 #else
 591 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 592 #endif
 593 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 594
 595 /* controller 4, Base address 203000 */
 596 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 597 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 598 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 599 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 600 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 601 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 602
 603 /* Qman/Bman */
 604 #ifndef CONFIG_NOBQFMAN
 605 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 606 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 607 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 608 #ifdef CONFIG_PHYS_64BIT
 609 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 610 #else
 611 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 612 #endif
 613 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 614 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 615 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 616 #ifdef CONFIG_PHYS_64BIT
 617 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 618 #else
 619 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 620 #endif
 621 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 622
 623 #define CONFIG_SYS_DPAA_FMAN
 624 #define CONFIG_SYS_DPAA_PME
 625 #define CONFIG_SYS_PMAN
 626 #define CONFIG_SYS_DPAA_DCE
 627 #define CONFIG_SYS_INTERLAKEN
 628
 629 /* Default address of microcode for the Linux Fman driver */
 630 #if defined(CONFIG_SPIFLASH)
 631 /*
 632  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 633  * env, so we got 0x110000.
 634  */
 635 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 636 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 637 #elif defined(CONFIG_SDCARD)
 638 /*
 639  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 640  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 641  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 642  */
 643 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 644 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 645 #elif defined(CONFIG_NAND)
 646 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 647 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 648 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 649 /*
 650  * Slave has no ucode locally, it can fetch this from remote. When implementing
 651  * in two corenet boards, slave's ucode could be stored in master's memory
 652  * space, the address can be mapped from slave TLB->slave LAW->
 653  * slave SRIO or PCIE outbound window->master inbound window->
 654  * master LAW->the ucode address in master's memory space.
 655  */
 656 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 657 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 658 #else
 659 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 660 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 661 #endif
 662 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 663 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 664 #endif /* CONFIG_NOBQFMAN */
 665
 666 #ifdef CONFIG_SYS_DPAA_FMAN
 667 #define CONFIG_FMAN_ENET
 668 #define CONFIG_PHYLIB_10G
 669 #define CONFIG_PHY_VITESSE
 670 #define CONFIG_PHY_TERANETICS
 671 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 672 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 673 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 674 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 675 #define FM1_10GEC1_PHY_ADDR     0x0
 676 #define FM1_10GEC2_PHY_ADDR     0x1
 677 #define FM2_10GEC1_PHY_ADDR     0x2
 678 #define FM2_10GEC2_PHY_ADDR     0x3
 679 #endif
 680
 681 #ifdef CONFIG_PCI
 682 #define CONFIG_PCI_INDIRECT_BRIDGE
 683 #define CONFIG_NET_MULTI
 684 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 685 #define CONFIG_E1000
 686
 687 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 688 #define CONFIG_DOS_PARTITION
 689 #endif  /* CONFIG_PCI */
 690
 691 /* SATA */
 692 #ifdef CONFIG_FSL_SATA_V2
 693 #define CONFIG_LIBATA
 694 #define CONFIG_FSL_SATA
 695
 696 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 697 #define CONFIG_SATA1
 698 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 699 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 700 #define CONFIG_SATA2
 701 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 702 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 703
 704 #define CONFIG_LBA48
 705 #define CONFIG_CMD_SATA
 706 #define CONFIG_DOS_PARTITION
 707 #define CONFIG_CMD_EXT2
 708 #endif
 709
 710 #ifdef CONFIG_FMAN_ENET
 711 #define CONFIG_MII              /* MII PHY management */
 712 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 713 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 714 #endif
 715
 716 /*
 717  * Environment
 718  */
 719 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 720 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 721
 722 /*
 723  * Command line configuration.
 724  */
 725 #include <config_cmd_default.h>
 726
 727 #define CONFIG_CMD_DHCP
 728 #define CONFIG_CMD_ELF
 729 #define CONFIG_CMD_ERRATA
 730 #define CONFIG_CMD_GREPENV
 731 #define CONFIG_CMD_IRQ
 732 #define CONFIG_CMD_I2C
 733 #define CONFIG_CMD_MII
 734 #define CONFIG_CMD_PING
 735 #define CONFIG_CMD_SETEXPR
 736
 737 #ifdef CONFIG_PCI
 738 #define CONFIG_CMD_PCI
 739 #define CONFIG_CMD_NET
 740 #endif
 741
 742 /*
 743 * USB
 744 */
 745 #define CONFIG_CMD_USB
 746 #define CONFIG_USB_STORAGE
 747 #define CONFIG_USB_EHCI
 748 #define CONFIG_USB_EHCI_FSL
 749 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 750 #define CONFIG_CMD_EXT2
 751 #define CONFIG_HAS_FSL_DR_USB
 752
 753 #define CONFIG_MMC
 754
 755 #ifdef CONFIG_MMC
 756 #define CONFIG_FSL_ESDHC
 757 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 758 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 759 #define CONFIG_CMD_MMC
 760 #define CONFIG_GENERIC_MMC
 761 #define CONFIG_CMD_EXT2
 762 #define CONFIG_CMD_FAT
 763 #define CONFIG_DOS_PARTITION
 764 #endif
 765
 766 /*
 767  * Miscellaneous configurable options
 768  */
 769 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 770 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 771 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 772 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 773 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 774 #ifdef CONFIG_CMD_KGDB
 775 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 776 #else
 777 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 778 #endif
 779 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 780 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 781 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 782 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 783
 784 /*
 785  * For booting Linux, the board info and command line data
 786  * have to be in the first 64 MB of memory, since this is
 787  * the maximum mapped by the Linux kernel during initialization.
 788  */
 789 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 790 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 791
 792 #ifdef CONFIG_CMD_KGDB
 793 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 794 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 795 #endif
 796
 797 /*
 798  * Environment Configuration
 799  */
 800 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 801 #define CONFIG_BOOTFILE         "uImage"
 802 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 803
 804 /* default location for tftp and bootm */
 805 #define CONFIG_LOADADDR         1000000
 806
 807 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 808
 809 #define CONFIG_BAUDRATE 115200
 810
 811 #define __USB_PHY_TYPE  utmi
 812
 813 /*
 814  * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
 815  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
 816  * cacheline interleaving. It can be cacheline, page, bank, superbank.
 817  * See doc/README.fsl-ddr for details.
 818  */
 819 #ifdef CONFIG_PPC_T4240
 820 #define CTRL_INTLV_PREFERED 3way_4KB
 821 #else
 822 #define CTRL_INTLV_PREFERED cacheline
 823 #endif
 824
 825 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 826         "hwconfig=fsl_ddr:"                                     \
 827         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 828         "bank_intlv=auto;"                                      \
 829         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 830         "netdev=eth0\0"                                         \
 831         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 832         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 833         "tftpflash=tftpboot $loadaddr $uboot && "               \
 834         "protect off $ubootaddr +$filesize && "                 \
 835         "erase $ubootaddr +$filesize && "                       \
 836         "cp.b $loadaddr $ubootaddr $filesize && "               \
 837         "protect on $ubootaddr +$filesize && "                  \
 838         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 839         "consoledev=ttyS0\0"                                    \
 840         "ramdiskaddr=2000000\0"                                 \
 841         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 842         "fdtaddr=c00000\0"                                      \
 843         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 844         "bdev=sda3\0"                                           \
 845         "c=ffe\0"
 846
 847 /* For emulation this causes u-boot to jump to the start of the proof point
 848    app code automatically */
 849 #define CONFIG_PROOF_POINTS                     \
 850  "setenv bootargs root=/dev/$bdev rw "          \
 851  "console=$consoledev,$baudrate $othbootargs;"  \
 852  "cpu 1 release 0x29000000 - - -;"              \
 853  "cpu 2 release 0x29000000 - - -;"              \
 854  "cpu 3 release 0x29000000 - - -;"              \
 855  "cpu 4 release 0x29000000 - - -;"              \
 856  "cpu 5 release 0x29000000 - - -;"              \
 857  "cpu 6 release 0x29000000 - - -;"              \
 858  "cpu 7 release 0x29000000 - - -;"              \
 859  "go 0x29000000"
 860
 861 #define CONFIG_HVBOOT                           \
 862  "setenv bootargs config-addr=0x60000000; "     \
 863  "bootm 0x01000000 - 0x00f00000"
 864
 865 #define CONFIG_ALU                              \
 866  "setenv bootargs root=/dev/$bdev rw "          \
 867  "console=$consoledev,$baudrate $othbootargs;"  \
 868  "cpu 1 release 0x01000000 - - -;"              \
 869  "cpu 2 release 0x01000000 - - -;"              \
 870  "cpu 3 release 0x01000000 - - -;"              \
 871  "cpu 4 release 0x01000000 - - -;"              \
 872  "cpu 5 release 0x01000000 - - -;"              \
 873  "cpu 6 release 0x01000000 - - -;"              \
 874  "cpu 7 release 0x01000000 - - -;"              \
 875  "go 0x01000000"
 876
 877 #define CONFIG_LINUX                            \
 878  "setenv bootargs root=/dev/ram rw "            \
 879  "console=$consoledev,$baudrate $othbootargs;"  \
 880  "setenv ramdiskaddr 0x02000000;"               \
 881  "setenv fdtaddr 0x00c00000;"                   \
 882  "setenv loadaddr 0x1000000;"                   \
 883  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 884
 885 #define CONFIG_HDBOOT                                   \
 886         "setenv bootargs root=/dev/$bdev rw "           \
 887         "console=$consoledev,$baudrate $othbootargs;"   \
 888         "tftp $loadaddr $bootfile;"                     \
 889         "tftp $fdtaddr $fdtfile;"                       \
 890         "bootm $loadaddr - $fdtaddr"
 891
 892 #define CONFIG_NFSBOOTCOMMAND                   \
 893         "setenv bootargs root=/dev/nfs rw "     \
 894         "nfsroot=$serverip:$rootpath "          \
 895         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 896         "console=$consoledev,$baudrate $othbootargs;"   \
 897         "tftp $loadaddr $bootfile;"             \
 898         "tftp $fdtaddr $fdtfile;"               \
 899         "bootm $loadaddr - $fdtaddr"
 900
 901 #define CONFIG_RAMBOOTCOMMAND                           \
 902         "setenv bootargs root=/dev/ram rw "             \
 903         "console=$consoledev,$baudrate $othbootargs;"   \
 904         "tftp $ramdiskaddr $ramdiskfile;"               \
 905         "tftp $loadaddr $bootfile;"                     \
 906         "tftp $fdtaddr $fdtfile;"                       \
 907         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 908
 909 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 910
 911 #ifdef CONFIG_SECURE_BOOT
 912 #include <asm/fsl_secure_boot.h>
 913 #endif
 914
 915 #endif  /* __CONFIG_H */