Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
[platform/kernel/u-boot.git] / include / configs / t4qds.h
1 /*
2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22
23 /*
24  * Corenet DS style board configuration file
25  */
26 #ifndef __CONFIG_H
27 #define __CONFIG_H
28
29 #ifdef CONFIG_RAMBOOT_PBL
30 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
31 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
32 #define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
33 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
34 #endif
35
36 #define CONFIG_CMD_REGINFO
37
38 /* High Level Configuration Options */
39 #define CONFIG_BOOKE
40 #define CONFIG_E500                     /* BOOKE e500 family */
41 #define CONFIG_E500MC                   /* BOOKE e500mc family */
42 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
43 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
44 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
45 #define CONFIG_MP                       /* support multiple processors */
46
47 #ifndef CONFIG_SYS_TEXT_BASE
48 #define CONFIG_SYS_TEXT_BASE    0xeff80000
49 #endif
50
51 #ifndef CONFIG_RESET_VECTOR_ADDRESS
52 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
53 #endif
54
55 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
56 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
57 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
58 #define CONFIG_PCI                      /* Enable PCI/PCIE */
59 #define CONFIG_PCIE1                    /* PCIE controler 1 */
60 #define CONFIG_PCIE2                    /* PCIE controler 2 */
61 #define CONFIG_PCIE3                    /* PCIE controler 3 */
62 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
63 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
64
65 #define CONFIG_SYS_SRIO
66 #define CONFIG_SRIO1                    /* SRIO port 1 */
67 #define CONFIG_SRIO2                    /* SRIO port 2 */
68
69 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
70
71 #define CONFIG_ENV_OVERWRITE
72
73 #ifdef CONFIG_SYS_NO_FLASH
74 #define CONFIG_ENV_IS_NOWHERE
75 #else
76 #define CONFIG_FLASH_CFI_DRIVER
77 #define CONFIG_SYS_FLASH_CFI
78 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
79 #endif
80
81 #ifndef CONFIG_SYS_NO_FLASH
82 #if defined(CONFIG_SPIFLASH)
83 #define CONFIG_SYS_EXTRA_ENV_RELOC
84 #define CONFIG_ENV_IS_IN_SPI_FLASH
85 #define CONFIG_ENV_SPI_BUS              0
86 #define CONFIG_ENV_SPI_CS               0
87 #define CONFIG_ENV_SPI_MAX_HZ           10000000
88 #define CONFIG_ENV_SPI_MODE             0
89 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
90 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
91 #define CONFIG_ENV_SECT_SIZE            0x10000
92 #elif defined(CONFIG_SDCARD)
93 #define CONFIG_SYS_EXTRA_ENV_RELOC
94 #define CONFIG_ENV_IS_IN_MMC
95 #define CONFIG_SYS_MMC_ENV_DEV          0
96 #define CONFIG_ENV_SIZE                 0x2000
97 #define CONFIG_ENV_OFFSET               (512 * 1097)
98 #elif defined(CONFIG_NAND)
99 #define CONFIG_SYS_EXTRA_ENV_RELOC
100 #define CONFIG_ENV_IS_IN_NAND
101 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
102 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
103 #else
104 #define CONFIG_ENV_IS_IN_FLASH
105 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
106 #define CONFIG_ENV_SIZE         0x2000
107 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
108 #endif
109 #else /* CONFIG_SYS_NO_FLASH */
110 #define CONFIG_ENV_SIZE                0x2000
111 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
112 #endif
113
114
115
116 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
117 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
118
119 #ifndef __ASSEMBLY__
120 unsigned long get_board_sys_clk(void);
121 unsigned long get_board_ddr_clk(void);
122 #endif
123
124 /*
125  * These can be toggled for performance analysis, otherwise use default.
126  */
127 #define CONFIG_SYS_CACHE_STASHING
128 #define CONFIG_BTB                      /* toggle branch predition */
129 #define CONFIG_DDR_ECC
130 #ifdef CONFIG_DDR_ECC
131 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
132 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
133 #endif
134
135 #define CONFIG_ENABLE_36BIT_PHYS
136
137 #ifdef CONFIG_PHYS_64BIT
138 #define CONFIG_ADDR_MAP
139 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
140 #endif
141
142 #if 0
143 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
144 #endif
145 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
146 #define CONFIG_SYS_MEMTEST_END          0x00400000
147 #define CONFIG_SYS_ALT_MEMTEST
148 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
149
150 /*
151  *  Config the L3 Cache as L3 SRAM
152  */
153 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
154
155 #ifdef CONFIG_PHYS_64BIT
156 #define CONFIG_SYS_DCSRBAR              0xf0000000
157 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
158 #endif
159
160 /* EEPROM */
161 #define CONFIG_ID_EEPROM
162 #define CONFIG_SYS_I2C_EEPROM_NXID
163 #define CONFIG_SYS_EEPROM_BUS_NUM       0
164 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
165 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
166
167 /*
168  * DDR Setup
169  */
170 #define CONFIG_VERY_BIG_RAM
171 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
172 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
173
174 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
175 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
176 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
177 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
178
179 #define CONFIG_DDR_SPD
180 #define CONFIG_FSL_DDR3
181
182 #define CONFIG_SYS_SPD_BUS_NUM  0
183 #define SPD_EEPROM_ADDRESS1     0x51
184 #define SPD_EEPROM_ADDRESS2     0x52
185 #define SPD_EEPROM_ADDRESS3     0x53
186 #define SPD_EEPROM_ADDRESS4     0x54
187 #define SPD_EEPROM_ADDRESS5     0x55
188 #define SPD_EEPROM_ADDRESS6     0x56
189 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
190 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
191
192 /*
193  * IFC Definitions
194  */
195 #define CONFIG_SYS_FLASH_BASE   0xe0000000
196 #ifdef CONFIG_PHYS_64BIT
197 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
198 #else
199 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
200 #endif
201
202 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
203 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
204                                 + 0x8000000) | \
205                                 CSPR_PORT_SIZE_16 | \
206                                 CSPR_MSEL_NOR | \
207                                 CSPR_V)
208 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
209 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
210                                 CSPR_PORT_SIZE_16 | \
211                                 CSPR_MSEL_NOR | \
212                                 CSPR_V)
213 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
214 /* NOR Flash Timing Params */
215 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
216
217 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
218                                 FTIM0_NOR_TEADC(0x5) | \
219                                 FTIM0_NOR_TEAHC(0x5))
220 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
221                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
222                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
223 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
224                                 FTIM2_NOR_TCH(0x4) | \
225                                 FTIM2_NOR_TWPH(0x0E) | \
226                                 FTIM2_NOR_TWP(0x1c))
227 #define CONFIG_SYS_NOR_FTIM3    0x0
228
229 #define CONFIG_SYS_FLASH_QUIET_TEST
230 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
231
232 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
233 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
234 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
235 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
236
237 #define CONFIG_SYS_FLASH_EMPTY_INFO
238 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
239                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
240
241 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
242 #define QIXIS_BASE                      0xffdf0000
243 #define QIXIS_LBMAP_SWITCH              6
244 #define QIXIS_LBMAP_MASK                0x0f
245 #define QIXIS_LBMAP_SHIFT               0
246 #define QIXIS_LBMAP_DFLTBANK            0x00
247 #define QIXIS_LBMAP_ALTBANK             0x04
248 #define QIXIS_RST_CTL_RESET             0x83
249 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
250 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
251 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
252 #ifdef CONFIG_PHYS_64BIT
253 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
254 #else
255 #define QIXIS_BASE_PHYS         QIXIS_BASE
256 #endif
257
258 #define CONFIG_SYS_CSPR3_EXT    (0xf)
259 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
260                                 | CSPR_PORT_SIZE_8 \
261                                 | CSPR_MSEL_GPCM \
262                                 | CSPR_V)
263 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
264 #define CONFIG_SYS_CSOR3        0x0
265 /* QIXIS Timing parameters for IFC CS3 */
266 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
267                                         FTIM0_GPCM_TEADC(0x0e) | \
268                                         FTIM0_GPCM_TEAHC(0x0e))
269 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
270                                         FTIM1_GPCM_TRAD(0x3f))
271 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
272                                         FTIM2_GPCM_TCH(0x0) | \
273                                         FTIM2_GPCM_TWP(0x1f))
274 #define CONFIG_SYS_CS3_FTIM3            0x0
275
276 /* NAND Flash on IFC */
277 #define CONFIG_NAND_FSL_IFC
278 #define CONFIG_SYS_NAND_BASE            0xff800000
279 #ifdef CONFIG_PHYS_64BIT
280 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
281 #else
282 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
283 #endif
284
285 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
286 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
287                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
288                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
289                                 | CSPR_V)
290 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
291
292 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
293                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
294                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
295                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
296                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
297                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
298                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
299
300 #define CONFIG_SYS_NAND_ONFI_DETECTION
301
302 /* ONFI NAND Flash mode0 Timing Params */
303 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
304                                         FTIM0_NAND_TWP(0x18)   | \
305                                         FTIM0_NAND_TWCHT(0x07) | \
306                                         FTIM0_NAND_TWH(0x0a))
307 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
308                                         FTIM1_NAND_TWBE(0x39)  | \
309                                         FTIM1_NAND_TRR(0x0e)   | \
310                                         FTIM1_NAND_TRP(0x18))
311 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
312                                         FTIM2_NAND_TREH(0x0a) | \
313                                         FTIM2_NAND_TWHRE(0x1e))
314 #define CONFIG_SYS_NAND_FTIM3           0x0
315
316 #define CONFIG_SYS_NAND_DDR_LAW         11
317
318 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
319 #define CONFIG_SYS_MAX_NAND_DEVICE      1
320 #define CONFIG_MTD_NAND_VERIFY_WRITE
321 #define CONFIG_CMD_NAND
322
323 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
324
325 #if defined(CONFIG_NAND)
326 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
327 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
328 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
329 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
330 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
331 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
332 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
333 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
334 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
335 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
336 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
337 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
338 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
339 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
340 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
341 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
342 #else
343 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
344 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
345 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
346 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
347 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
348 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
349 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
350 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
351 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
352 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
353 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
354 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
355 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
356 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
357 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
358 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
359 #endif
360 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
361 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
362 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
363 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
364 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
365 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
366 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
367 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
368
369 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
370
371 #if defined(CONFIG_RAMBOOT_PBL)
372 #define CONFIG_SYS_RAMBOOT
373 #endif
374
375 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
376 #define CONFIG_MISC_INIT_R
377
378 #define CONFIG_HWCONFIG
379
380 /* define to use L1 as initial stack */
381 #define CONFIG_L1_INIT_RAM
382 #define CONFIG_SYS_INIT_RAM_LOCK
383 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
384 #ifdef CONFIG_PHYS_64BIT
385 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
386 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
387 /* The assembler doesn't like typecast */
388 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
389         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
390           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
391 #else
392 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
393 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
394 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
395 #endif
396 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
397
398 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
399                                         GENERATED_GBL_DATA_SIZE)
400 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
401
402 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
403 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
404
405 /* Serial Port - controlled on board with jumper J8
406  * open - index 2
407  * shorted - index 1
408  */
409 #define CONFIG_CONS_INDEX       1
410 #define CONFIG_SYS_NS16550
411 #define CONFIG_SYS_NS16550_SERIAL
412 #define CONFIG_SYS_NS16550_REG_SIZE     1
413 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
414
415 #define CONFIG_SYS_BAUDRATE_TABLE       \
416         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
417
418 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
419 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
420 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
421 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
422
423 /* Use the HUSH parser */
424 #define CONFIG_SYS_HUSH_PARSER
425 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
426
427 /* pass open firmware flat tree */
428 #define CONFIG_OF_LIBFDT
429 #define CONFIG_OF_BOARD_SETUP
430 #define CONFIG_OF_STDOUT_VIA_ALIAS
431
432 /* new uImage format support */
433 #define CONFIG_FIT
434 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
435
436 /* I2C */
437 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
438 #define CONFIG_HARD_I2C         /* I2C with hardware support */
439 #define CONFIG_I2C_MULTI_BUS
440 #define CONFIG_I2C_CMD_TREE
441 #define CONFIG_SYS_I2C_SPEED            100000  /* I2C speed */
442 #define CONFIG_SYS_I2C_SLAVE            0x7F
443 #define CONFIG_SYS_I2C_OFFSET           0x118000
444 #define CONFIG_SYS_I2C2_OFFSET          0x118100
445 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
446 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
447
448 #define I2C_MUX_CH_DEFAULT      0x8
449 #define I2C_MUX_CH_VOL_MONITOR  0xa
450 #define I2C_MUX_CH_VSC3316_FS   0xc
451 #define I2C_MUX_CH_VSC3316_BS   0xd
452
453 /* Voltage monitor on channel 2*/
454 #define I2C_VOL_MONITOR_ADDR            0x40
455 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
456 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
457 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
458
459 /* VSC Crossbar switches */
460 #define CONFIG_VSC_CROSSBAR
461 #define VSC3316_FSM_TX_ADDR     0x70
462 #define VSC3316_FSM_RX_ADDR     0x71
463
464 /*
465  * RapidIO
466  */
467 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
468 #ifdef CONFIG_PHYS_64BIT
469 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
470 #else
471 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
472 #endif
473 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
474
475 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
476 #ifdef CONFIG_PHYS_64BIT
477 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
478 #else
479 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
480 #endif
481 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
482
483 /*
484  * for slave u-boot IMAGE instored in master memory space,
485  * PHYS must be aligned based on the SIZE
486  */
487 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
488 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
489 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
490 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
491 /*
492  * for slave UCODE and ENV instored in master memory space,
493  * PHYS must be aligned based on the SIZE
494  */
495 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
496 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
497 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
498
499 /* slave core release by master*/
500 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
501 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
502
503 /*
504  * SRIO_PCIE_BOOT - SLAVE
505  */
506 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
507 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
508 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
509                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
510 #endif
511 /*
512  * eSPI - Enhanced SPI
513  */
514 #define CONFIG_FSL_ESPI
515 #define CONFIG_SPI_FLASH
516 #define CONFIG_SPI_FLASH_SST
517 #define CONFIG_CMD_SF
518 #define CONFIG_SF_DEFAULT_SPEED         10000000
519 #define CONFIG_SF_DEFAULT_MODE          0
520
521 /*
522  * General PCI
523  * Memory space is mapped 1-1, but I/O space must start from 0.
524  */
525
526 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
527 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
528 #ifdef CONFIG_PHYS_64BIT
529 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
530 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
531 #else
532 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
533 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
534 #endif
535 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
536 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
537 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
538 #ifdef CONFIG_PHYS_64BIT
539 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
540 #else
541 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
542 #endif
543 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
544
545 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
546 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
547 #ifdef CONFIG_PHYS_64BIT
548 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
549 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
550 #else
551 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
552 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
553 #endif
554 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
555 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
556 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
557 #ifdef CONFIG_PHYS_64BIT
558 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
559 #else
560 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
561 #endif
562 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
563
564 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
565 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
566 #ifdef CONFIG_PHYS_64BIT
567 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
568 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
569 #else
570 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
571 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
572 #endif
573 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
574 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
575 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
576 #ifdef CONFIG_PHYS_64BIT
577 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
578 #else
579 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
580 #endif
581 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
582
583 /* controller 4, Base address 203000 */
584 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
585 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
586 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
587 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
588 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
589 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
590
591 /* Qman/Bman */
592 #ifndef CONFIG_NOBQFMAN
593 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
594 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
595 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
596 #ifdef CONFIG_PHYS_64BIT
597 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
598 #else
599 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
600 #endif
601 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
602 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
603 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
604 #ifdef CONFIG_PHYS_64BIT
605 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
606 #else
607 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
608 #endif
609 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
610
611 #define CONFIG_SYS_DPAA_FMAN
612 #define CONFIG_SYS_DPAA_PME
613 #define CONFIG_SYS_PMAN
614 #define CONFIG_SYS_DPAA_DCE
615 #define CONFIG_SYS_INTERLAKEN
616
617 /* Default address of microcode for the Linux Fman driver */
618 #if defined(CONFIG_SPIFLASH)
619 /*
620  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
621  * env, so we got 0x110000.
622  */
623 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
624 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
625 #elif defined(CONFIG_SDCARD)
626 /*
627  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
628  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
629  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
630  */
631 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
632 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
633 #elif defined(CONFIG_NAND)
634 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
635 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
636 #else
637 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
638 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
639 #endif
640 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
641 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
642 #endif /* CONFIG_NOBQFMAN */
643
644 #ifdef CONFIG_SYS_DPAA_FMAN
645 #define CONFIG_FMAN_ENET
646 #define CONFIG_PHYLIB_10G
647 #define CONFIG_PHY_VITESSE
648 #define CONFIG_PHY_TERANETICS
649 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
650 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
651 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
652 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
653 #define FM1_10GEC1_PHY_ADDR     0x0
654 #define FM1_10GEC2_PHY_ADDR     0x1
655 #define FM2_10GEC1_PHY_ADDR     0x2
656 #define FM2_10GEC2_PHY_ADDR     0x3
657 #endif
658
659 #ifdef CONFIG_PCI
660 #define CONFIG_NET_MULTI
661 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
662 #define CONFIG_E1000
663
664 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
665 #define CONFIG_DOS_PARTITION
666 #endif  /* CONFIG_PCI */
667
668 /* SATA */
669 #ifdef CONFIG_FSL_SATA_V2
670 #define CONFIG_LIBATA
671 #define CONFIG_FSL_SATA
672
673 #define CONFIG_SYS_SATA_MAX_DEVICE      2
674 #define CONFIG_SATA1
675 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
676 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
677 #define CONFIG_SATA2
678 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
679 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
680
681 #define CONFIG_LBA48
682 #define CONFIG_CMD_SATA
683 #define CONFIG_DOS_PARTITION
684 #define CONFIG_CMD_EXT2
685 #endif
686
687 #ifdef CONFIG_FMAN_ENET
688 #define CONFIG_MII              /* MII PHY management */
689 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
690 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
691 #endif
692
693 /*
694  * Environment
695  */
696 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
697 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
698
699 /*
700  * Command line configuration.
701  */
702 #include <config_cmd_default.h>
703
704 #define CONFIG_CMD_DHCP
705 #define CONFIG_CMD_ELF
706 #define CONFIG_CMD_ERRATA
707 #define CONFIG_CMD_GREPENV
708 #define CONFIG_CMD_IRQ
709 #define CONFIG_CMD_I2C
710 #define CONFIG_CMD_MII
711 #define CONFIG_CMD_PING
712 #define CONFIG_CMD_SETEXPR
713
714 #ifdef CONFIG_PCI
715 #define CONFIG_CMD_PCI
716 #define CONFIG_CMD_NET
717 #endif
718
719 /*
720 * USB
721 */
722 #define CONFIG_CMD_USB
723 #define CONFIG_USB_STORAGE
724 #define CONFIG_USB_EHCI
725 #define CONFIG_USB_EHCI_FSL
726 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
727 #define CONFIG_CMD_EXT2
728 #define CONFIG_HAS_FSL_DR_USB
729
730 #define CONFIG_MMC
731
732 #ifdef CONFIG_MMC
733 #define CONFIG_FSL_ESDHC
734 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
735 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
736 #define CONFIG_CMD_MMC
737 #define CONFIG_GENERIC_MMC
738 #define CONFIG_CMD_EXT2
739 #define CONFIG_CMD_FAT
740 #define CONFIG_DOS_PARTITION
741 #endif
742
743 /*
744  * Miscellaneous configurable options
745  */
746 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
747 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
748 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
749 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
750 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
751 #ifdef CONFIG_CMD_KGDB
752 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
753 #else
754 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
755 #endif
756 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
757 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
758 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
759 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
760
761 /*
762  * For booting Linux, the board info and command line data
763  * have to be in the first 64 MB of memory, since this is
764  * the maximum mapped by the Linux kernel during initialization.
765  */
766 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
767 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
768
769 #ifdef CONFIG_CMD_KGDB
770 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
771 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
772 #endif
773
774 /*
775  * Environment Configuration
776  */
777 #define CONFIG_ROOTPATH         "/opt/nfsroot"
778 #define CONFIG_BOOTFILE         "uImage"
779 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
780
781 /* default location for tftp and bootm */
782 #define CONFIG_LOADADDR         1000000
783
784 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
785
786 #define CONFIG_BAUDRATE 115200
787
788 #define __USB_PHY_TYPE  utmi
789
790 /*
791  * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
792  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
793  * cacheline interleaving. It can be cacheline, page, bank, superbank.
794  * See doc/README.fsl-ddr for details.
795  */
796 #ifdef CONFIG_PPC_T4240
797 #define CTRL_INTLV_PREFERED 3way_4KB
798 #else
799 #define CTRL_INTLV_PREFERED cacheline
800 #endif
801
802 #define CONFIG_EXTRA_ENV_SETTINGS                               \
803         "hwconfig=fsl_ddr:"                                     \
804         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
805         "bank_intlv=auto;"                                      \
806         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
807         "netdev=eth0\0"                                         \
808         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
809         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
810         "tftpflash=tftpboot $loadaddr $uboot && "               \
811         "protect off $ubootaddr +$filesize && "                 \
812         "erase $ubootaddr +$filesize && "                       \
813         "cp.b $loadaddr $ubootaddr $filesize && "               \
814         "protect on $ubootaddr +$filesize && "                  \
815         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
816         "consoledev=ttyS0\0"                                    \
817         "ramdiskaddr=2000000\0"                                 \
818         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
819         "fdtaddr=c00000\0"                                      \
820         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
821         "bdev=sda3\0"                                           \
822         "c=ffe\0"
823
824 /* For emulation this causes u-boot to jump to the start of the proof point
825    app code automatically */
826 #define CONFIG_PROOF_POINTS                     \
827  "setenv bootargs root=/dev/$bdev rw "          \
828  "console=$consoledev,$baudrate $othbootargs;"  \
829  "cpu 1 release 0x29000000 - - -;"              \
830  "cpu 2 release 0x29000000 - - -;"              \
831  "cpu 3 release 0x29000000 - - -;"              \
832  "cpu 4 release 0x29000000 - - -;"              \
833  "cpu 5 release 0x29000000 - - -;"              \
834  "cpu 6 release 0x29000000 - - -;"              \
835  "cpu 7 release 0x29000000 - - -;"              \
836  "go 0x29000000"
837
838 #define CONFIG_HVBOOT                           \
839  "setenv bootargs config-addr=0x60000000; "     \
840  "bootm 0x01000000 - 0x00f00000"
841
842 #define CONFIG_ALU                              \
843  "setenv bootargs root=/dev/$bdev rw "          \
844  "console=$consoledev,$baudrate $othbootargs;"  \
845  "cpu 1 release 0x01000000 - - -;"              \
846  "cpu 2 release 0x01000000 - - -;"              \
847  "cpu 3 release 0x01000000 - - -;"              \
848  "cpu 4 release 0x01000000 - - -;"              \
849  "cpu 5 release 0x01000000 - - -;"              \
850  "cpu 6 release 0x01000000 - - -;"              \
851  "cpu 7 release 0x01000000 - - -;"              \
852  "go 0x01000000"
853
854 #define CONFIG_LINUX                            \
855  "setenv bootargs root=/dev/ram rw "            \
856  "console=$consoledev,$baudrate $othbootargs;"  \
857  "setenv ramdiskaddr 0x02000000;"               \
858  "setenv fdtaddr 0x00c00000;"                   \
859  "setenv loadaddr 0x1000000;"                   \
860  "bootm $loadaddr $ramdiskaddr $fdtaddr"
861
862 #define CONFIG_HDBOOT                                   \
863         "setenv bootargs root=/dev/$bdev rw "           \
864         "console=$consoledev,$baudrate $othbootargs;"   \
865         "tftp $loadaddr $bootfile;"                     \
866         "tftp $fdtaddr $fdtfile;"                       \
867         "bootm $loadaddr - $fdtaddr"
868
869 #define CONFIG_NFSBOOTCOMMAND                   \
870         "setenv bootargs root=/dev/nfs rw "     \
871         "nfsroot=$serverip:$rootpath "          \
872         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
873         "console=$consoledev,$baudrate $othbootargs;"   \
874         "tftp $loadaddr $bootfile;"             \
875         "tftp $fdtaddr $fdtfile;"               \
876         "bootm $loadaddr - $fdtaddr"
877
878 #define CONFIG_RAMBOOTCOMMAND                           \
879         "setenv bootargs root=/dev/ram rw "             \
880         "console=$consoledev,$baudrate $othbootargs;"   \
881         "tftp $ramdiskaddr $ramdiskfile;"               \
882         "tftp $loadaddr $bootfile;"                     \
883         "tftp $fdtaddr $fdtfile;"                       \
884         "bootm $loadaddr $ramdiskaddr $fdtaddr"
885
886 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
887
888 #ifdef CONFIG_SECURE_BOOT
889 #include <asm/fsl_secure_boot.h>
890 #endif
891
892 #endif  /* __CONFIG_H */