1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2011-2012 Freescale Semiconductor, Inc.
7 * Corenet DS style board configuration file
12 /* High Level Configuration Options */
13 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
15 #ifndef CONFIG_RESET_VECTOR_ADDRESS
16 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
19 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
20 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
21 #define CONFIG_PCIE1 /* PCIE controller 1 */
22 #define CONFIG_PCIE2 /* PCIE controller 2 */
23 #define CONFIG_PCIE3 /* PCIE controller 3 */
24 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
25 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
27 #define CONFIG_SYS_SRIO
28 #define CONFIG_SRIO1 /* SRIO port 1 */
29 #define CONFIG_SRIO2 /* SRIO port 2 */
32 * These can be toggled for performance analysis, otherwise use default.
34 #define CONFIG_SYS_CACHE_STASHING
35 #define CONFIG_BTB /* toggle branch predition */
37 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
38 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef
41 #define CONFIG_ENABLE_36BIT_PHYS
44 * Config the L3 Cache as L3 SRAM
46 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000
47 #define CONFIG_SYS_L3_SIZE (512 << 10)
48 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
49 #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
50 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
51 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10)
52 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
54 #define CONFIG_SYS_DCSRBAR 0xf0000000
55 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
60 #define CONFIG_VERY_BIG_RAM
61 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
62 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
64 #define CONFIG_DIMM_SLOTS_PER_CTLR 2
65 #define CONFIG_CHIP_SELECTS_PER_CTRL 4
67 #define CONFIG_DDR_SPD
72 #define CONFIG_SYS_FLASH_BASE 0xe0000000
73 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
75 #ifdef CONFIG_SPL_BUILD
76 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
78 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
81 #define CONFIG_HWCONFIG
83 /* define to use L1 as initial stack */
84 #define CONFIG_L1_INIT_RAM
85 #define CONFIG_SYS_INIT_RAM_LOCK
86 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
87 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
88 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
89 /* The assembler doesn't like typecast */
90 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
91 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
92 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
93 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
95 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
96 GENERATED_GBL_DATA_SIZE)
97 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
99 #define CONFIG_SYS_MONITOR_LEN (768 * 1024)
100 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
102 /* Serial Port - controlled on board with jumper J8
106 #define CONFIG_SYS_NS16550_SERIAL
107 #define CONFIG_SYS_NS16550_REG_SIZE 1
108 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
110 #define CONFIG_SYS_BAUDRATE_TABLE \
111 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
113 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
114 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
115 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
116 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
119 #define CONFIG_SYS_I2C
120 #define CONFIG_SYS_I2C_FSL
121 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
122 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
123 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
124 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
129 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
130 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
131 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
133 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
134 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
135 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
139 * Memory space is mapped 1-1, but I/O space must start from 0.
142 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
143 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
144 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
145 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
146 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
147 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
148 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
149 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
150 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
152 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
153 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
154 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
155 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
156 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
157 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
158 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
159 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
160 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
162 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
163 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
164 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
165 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
166 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
167 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
168 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
169 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
170 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
172 /* controller 4, Base address 203000 */
173 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
174 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
175 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
176 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
177 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
178 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
181 #define CONFIG_PCI_INDIRECT_BRIDGE
183 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
184 #endif /* CONFIG_PCI */
187 #ifdef CONFIG_FSL_SATA_V2
188 #define CONFIG_SYS_SATA_MAX_DEVICE 2
190 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
191 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
193 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
194 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
199 #ifdef CONFIG_FMAN_ENET
200 #define CONFIG_ETHPRIME "FM1@DTSEC1"
206 #define CONFIG_LOADS_ECHO /* echo on for serial download */
207 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
210 * Miscellaneous configurable options
212 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
215 * For booting Linux, the board info and command line data
216 * have to be in the first 64 MB of memory, since this is
217 * the maximum mapped by the Linux kernel during initialization.
219 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
220 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
222 #ifdef CONFIG_CMD_KGDB
223 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
227 * Environment Configuration
229 #define CONFIG_ROOTPATH "/opt/nfsroot"
230 #define CONFIG_BOOTFILE "uImage"
231 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
233 /* default location for tftp and bootm */
234 #define CONFIG_LOADADDR 1000000
236 #define CONFIG_HVBOOT \
237 "setenv bootargs config-addr=0x60000000; " \
238 "bootm 0x01000000 - 0x00f00000"
240 #endif /* __CONFIG_H */