include/configs/synquacer.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (C) 2016-2017 Socionext Inc.
   4  */
   5 #ifndef __CONFIG_H
   6 #define __CONFIG_H
   7
   8 /* Timers for fasp(TIMCLK) */
   9 #define CONFIG_SYS_TIMERBASE            0x31080000      /* AP Timer 1 (ARM-SP804) */
  10
  11 /*
  12  * SDRAM (for initialize)
  13  */
  14 #define CONFIG_SYS_SDRAM_BASE           (0x80000000)    /* Start address of DDR3 */
  15 #define PHYS_SDRAM_SIZE                 (0x7c000000)    /* Default size (2GB - Secure memory) */
  16
  17 #define CONFIG_VERY_BIG_RAM                             /* SynQuacer supports up to 64GB */
  18 #define CONFIG_MAX_MEM_MAPPED           PHYS_SDRAM_SIZE
  19
  20 #define SQ_DRAMINFO_BASE                (0x2e00ffc0)    /* DRAM info from TF-A */
  21
  22 /*
  23  * Boot info
  24  */
  25 #define CONFIG_SYS_INIT_SP_ADDR         (0xe0000000)    /* stack of init proccess */
  26
  27 /*
  28  * Hardware drivers support
  29  */
  30
  31 /* RTC */
  32 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
  33
  34 /* Serial (pl011)       */
  35 #define UART_CLK                        (62500000)
  36 #define CONFIG_PL011_CLOCK              UART_CLK
  37 #define CONFIG_PL01x_PORTS              {(void *)(0x2a400000)}
  38
  39 /* Support MTD */
  40 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  41 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
  42 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
  43
  44 #define CONFIG_SYS_CBSIZE               1024
  45 #define CONFIG_SYS_MAXARGS              128
  46 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  47
  48 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
  49 /* #define CONFIG_SYS_PCI_64BIT         1 */
  50
  51 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                            \
  52                         "mtd nor1=u-boot.bin raw 200000 100000;"        \
  53                         "fip.bin raw 180000 78000;"                     \
  54                         "optee.bin raw 500000 100000\0"
  55
  56 /* Distro boot settings */
  57 #ifndef CONFIG_SPL_BUILD
  58 #ifdef CONFIG_CMD_USB
  59 #define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  60 #else
  61 #define BOOT_TARGET_DEVICE_USB(func)
  62 #endif
  63
  64 #ifdef CONFIG_CMD_MMC
  65 #define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0)
  66 #else
  67 #define BOOT_TARGET_DEVICE_MMC(func)
  68 #endif
  69
  70 #ifdef CONFIG_CMD_NVME
  71 #define BOOT_TARGET_DEVICE_NVME(func)   func(NVME, nvme, 0)
  72 #else
  73 #define BOOT_TARGET_DEVICE_NVME(func)
  74 #endif
  75
  76 #ifdef CONFIG_CMD_SCSI
  77 #define BOOT_TARGET_DEVICE_SCSI(func)   func(SCSI, scsi, 0) func(SCSI, scsi, 1)
  78 #else
  79 #define BOOT_TARGET_DEVICE_SCSI(func)
  80 #endif
  81
  82 #define BOOT_TARGET_DEVICES(func)       \
  83         BOOT_TARGET_DEVICE_USB(func)    \
  84         BOOT_TARGET_DEVICE_MMC(func)    \
  85         BOOT_TARGET_DEVICE_SCSI(func)   \
  86         BOOT_TARGET_DEVICE_NVME(func)   \
  87
  88 #include <config_distro_bootcmd.h>
  89 #else /* CONFIG_SPL_BUILD */
  90 #define BOOTENV
  91 #endif
  92
  93 #define CONFIG_EXTRA_ENV_SETTINGS               \
  94         "fdt_addr_r=0x9fe00000\0"               \
  95         "kernel_addr_r=0x90000000\0"            \
  96         "ramdisk_addr_r=0xa0000000\0"           \
  97         "scriptaddr=0x88000000\0"               \
  98         "pxefile_addr_r=0x88100000\0"           \
  99         DEFAULT_DFU_ALT_INFO                    \
 100         BOOTENV
 101
 102 #endif /* __CONFIG_H */