Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into...
[platform/kernel/u-boot.git] / include / configs / synquacer.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (C) 2016-2017 Socionext Inc.
4  */
5 #ifndef __CONFIG_H
6 #define __CONFIG_H
7
8 /* Timers for fasp(TIMCLK) */
9 #define CONFIG_SYS_HZ                   1000            /* 1 msec */
10 #define CONFIG_SYS_TIMERBASE            0x31080000      /* AP Timer 1 (ARM-SP804) */
11
12 /*
13  * SDRAM (for initialize)
14  */
15 #define CONFIG_SYS_SDRAM_BASE           (0x80000000)    /* Start address of DDR3 */
16 #define PHYS_SDRAM_SIZE                 (0x7c000000)    /* Default size (2GB - Secure memory) */
17
18 #define CONFIG_VERY_BIG_RAM                             /* SynQuacer supports up to 64GB */
19 #define CONFIG_MAX_MEM_MAPPED           PHYS_SDRAM_SIZE
20
21 #define SQ_DRAMINFO_BASE                (0x2e00ffc0)    /* DRAM info from TF-A */
22
23 /*
24  * Boot info
25  */
26 #define CONFIG_SYS_INIT_SP_ADDR         (0xe0000000)    /* stack of init proccess */
27
28 /*
29  * Hardware drivers support
30  */
31
32 /* RTC */
33 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
34
35 /* Serial (pl011)       */
36 #define UART_CLK                        (62500000)
37 #define CONFIG_SERIAL_MULTI
38 #define CONFIG_PL011_SERIAL
39 #define CONFIG_PL011_CLOCK              UART_CLK
40 #define CONFIG_PL01x_PORTS              {(void *)(0x2a400000)}
41
42 #define CONFIG_ENV_OVERWRITE            /* ethaddr can be reprogrammed */
43
44 /* Support MTD */
45 #define CONFIG_SYS_MAX_FLASH_BANKS      1
46 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
47 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
48
49 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE + (512 * 1024))
50 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE)
51
52 #define CONFIG_BAUDRATE                 115200
53 #define CONFIG_SYS_BAUDRATE_TABLE       {115200, 19200, 38400, 57600, 9600 }
54
55 #define CONFIG_SYS_CBSIZE               1024
56 #define CONFIG_SYS_MAXARGS              128
57 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
58
59 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
60 /* #define CONFIG_SYS_PCI_64BIT         1 */
61
62 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                            \
63                         "mtd mx66u51235f=u-boot.bin raw 200000 100000;" \
64                         "fip.bin raw 180000 78000;"                     \
65                         "optee.bin raw 500000 100000\0"
66
67 /* Distro boot settings */
68 #ifndef CONFIG_SPL_BUILD
69 #ifdef CONFIG_CMD_USB
70 #define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
71 #else
72 #define BOOT_TARGET_DEVICE_USB(func)
73 #endif
74
75 #ifdef CONFIG_CMD_MMC
76 #define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0)
77 #else
78 #define BOOT_TARGET_DEVICE_MMC(func)
79 #endif
80
81 #ifdef CONFIG_CMD_NVME
82 #define BOOT_TARGET_DEVICE_NVME(func)   func(NVME, nvme, 0)
83 #else
84 #define BOOT_TARGET_DEVICE_NVME(func)
85 #endif
86
87 #ifdef CONFIG_CMD_SCSI
88 #define BOOT_TARGET_DEVICE_SCSI(func)   func(SCSI, scsi, 0) func(SCSI, scsi, 1)
89 #else
90 #define BOOT_TARGET_DEVICE_SCSI(func)
91 #endif
92
93 #define BOOT_TARGET_DEVICES(func)       \
94         BOOT_TARGET_DEVICE_USB(func)    \
95         BOOT_TARGET_DEVICE_MMC(func)    \
96         BOOT_TARGET_DEVICE_SCSI(func)   \
97         BOOT_TARGET_DEVICE_NVME(func)   \
98
99 #include <config_distro_bootcmd.h>
100 #else /* CONFIG_SPL_BUILD */
101 #define BOOTENV
102 #endif
103
104 #define CONFIG_EXTRA_ENV_SETTINGS               \
105         "fdt_addr_r=0x9fe00000\0"               \
106         "kernel_addr_r=0x90000000\0"            \
107         "ramdisk_addr_r=0xa0000000\0"           \
108         "scriptaddr=0x88000000\0"               \
109         "pxefile_addr_r=0x88100000\0"           \
110         DEFAULT_DFU_ALT_INFO                    \
111         BOOTENV
112
113 #endif /* __CONFIG_H */