include/configs/synquacer.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (C) 2016-2017 Socionext Inc.
   4  */
   5 #ifndef __CONFIG_H
   6 #define __CONFIG_H
   7
   8 /* Timers for fasp(TIMCLK) */
   9 #define CONFIG_SYS_TIMERBASE            0x31080000      /* AP Timer 1 (ARM-SP804) */
  10
  11 /*
  12  * SDRAM (for initialize)
  13  */
  14 #define CONFIG_SYS_SDRAM_BASE           (0x80000000)    /* Start address of DDR3 */
  15 #define PHYS_SDRAM_SIZE                 (0x7c000000)    /* Default size (2GB - Secure memory) */
  16
  17 #define CONFIG_VERY_BIG_RAM                             /* SynQuacer supports up to 64GB */
  18 #define CONFIG_MAX_MEM_MAPPED           PHYS_SDRAM_SIZE
  19
  20 #define SQ_DRAMINFO_BASE                (0x2e00ffc0)    /* DRAM info from TF-A */
  21
  22 /*
  23  * Boot info
  24  */
  25 #define CONFIG_SYS_INIT_SP_ADDR         (0xe0000000)    /* stack of init proccess */
  26
  27 /*
  28  * Hardware drivers support
  29  */
  30
  31 /* RTC */
  32 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
  33
  34 /* Serial (pl011)       */
  35 #define UART_CLK                        (62500000)
  36 #define CONFIG_PL011_CLOCK              UART_CLK
  37 #define CONFIG_PL01x_PORTS              {(void *)(0x2a400000)}
  38
  39 /* Support MTD */
  40 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
  41 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
  42
  43 #define CONFIG_SYS_CBSIZE               1024
  44
  45 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
  46
  47 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                            \
  48                         "mtd nor1=u-boot.bin raw 200000 100000;"        \
  49                         "fip.bin raw 180000 78000;"                     \
  50                         "optee.bin raw 500000 100000\0"
  51
  52 /* GUIDs for capsule updatable firmware images */
  53 #define DEVELOPERBOX_UBOOT_IMAGE_GUID \
  54         EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
  55                  0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
  56
  57 #define DEVELOPERBOX_FIP_IMAGE_GUID \
  58         EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
  59                  0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
  60
  61 #define DEVELOPERBOX_OPTEE_IMAGE_GUID \
  62         EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
  63                  0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
  64
  65 /* Distro boot settings */
  66 #ifndef CONFIG_SPL_BUILD
  67 #ifdef CONFIG_CMD_USB
  68 #define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  69 #else
  70 #define BOOT_TARGET_DEVICE_USB(func)
  71 #endif
  72
  73 #ifdef CONFIG_CMD_MMC
  74 #define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0)
  75 #else
  76 #define BOOT_TARGET_DEVICE_MMC(func)
  77 #endif
  78
  79 #ifdef CONFIG_CMD_NVME
  80 #define BOOT_TARGET_DEVICE_NVME(func)   func(NVME, nvme, 0)
  81 #else
  82 #define BOOT_TARGET_DEVICE_NVME(func)
  83 #endif
  84
  85 #ifdef CONFIG_CMD_SCSI
  86 #define BOOT_TARGET_DEVICE_SCSI(func)   func(SCSI, scsi, 0) func(SCSI, scsi, 1)
  87 #else
  88 #define BOOT_TARGET_DEVICE_SCSI(func)
  89 #endif
  90
  91 #define BOOT_TARGET_DEVICES(func)       \
  92         BOOT_TARGET_DEVICE_USB(func)    \
  93         BOOT_TARGET_DEVICE_MMC(func)    \
  94         BOOT_TARGET_DEVICE_SCSI(func)   \
  95         BOOT_TARGET_DEVICE_NVME(func)   \
  96
  97 #include <config_distro_bootcmd.h>
  98 #else /* CONFIG_SPL_BUILD */
  99 #define BOOTENV
 100 #endif
 101
 102 #define CONFIG_EXTRA_ENV_SETTINGS               \
 103         "fdt_addr_r=0x9fe00000\0"               \
 104         "kernel_addr_r=0x90000000\0"            \
 105         "ramdisk_addr_r=0xa0000000\0"           \
 106         "scriptaddr=0x88000000\0"               \
 107         "pxefile_addr_r=0x88100000\0"           \
 108         DEFAULT_DFU_ALT_INFO                    \
 109         BOOTENV
 110
 111 #endif /* __CONFIG_H */