1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Copyright (C) 2016-2017 Socionext Inc.
8 /* Timers for fasp(TIMCLK) */
9 #define CONFIG_SYS_HZ 1000 /* 1 msec */
10 #define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */
13 * SDRAM (for initialize)
15 #define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
16 #define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
18 #define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */
19 #define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
21 #define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */
26 #define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */
29 * Hardware drivers support
33 #define CONFIG_SYS_I2C_RTC_ADDR 0x51
36 #define UART_CLK (62500000)
37 #define CONFIG_SERIAL_MULTI
38 #define CONFIG_PL011_SERIAL
39 #define CONFIG_PL011_CLOCK UART_CLK
40 #define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
42 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
45 #define CONFIG_SYS_MAX_FLASH_BANKS 1
46 #define CONFIG_SYS_FLASH_BASE (0x08000000)
47 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
49 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024))
50 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE)
52 #define CONFIG_BAUDRATE 115200
53 #define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 }
55 #define CONFIG_SYS_CBSIZE 1024
56 #define CONFIG_SYS_MAXARGS 128
57 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
59 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
60 /* #define CONFIG_SYS_PCI_64BIT 1 */
62 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
63 "mtd mx66u51235f=u-boot.bin raw 200000 100000;" \
64 "fip.bin raw 180000 78000;" \
65 "optee.bin raw 500000 100000\0"
67 /* Distro boot settings */
68 #ifndef CONFIG_SPL_BUILD
70 #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
72 #define BOOT_TARGET_DEVICE_USB(func)
76 #define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0)
78 #define BOOT_TARGET_DEVICE_MMC(func)
81 #ifdef CONFIG_CMD_NVME
82 #define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0)
84 #define BOOT_TARGET_DEVICE_NVME(func)
87 #ifdef CONFIG_CMD_SCSI
88 #define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1)
90 #define BOOT_TARGET_DEVICE_SCSI(func)
93 #define BOOT_TARGET_DEVICES(func) \
94 BOOT_TARGET_DEVICE_USB(func) \
95 BOOT_TARGET_DEVICE_MMC(func) \
96 BOOT_TARGET_DEVICE_SCSI(func) \
97 BOOT_TARGET_DEVICE_NVME(func) \
99 #include <config_distro_bootcmd.h>
100 #else /* CONFIG_SPL_BUILD */
104 #define CONFIG_EXTRA_ENV_SETTINGS \
105 "fdt_addr_r=0x9fe00000\0" \
106 "kernel_addr_r=0x90000000\0" \
107 "ramdisk_addr_r=0xa0000000\0" \
108 "scriptaddr=0x88000000\0" \
109 "pxefile_addr_r=0x88100000\0" \
110 DEFAULT_DFU_ALT_INFO \
113 #endif /* __CONFIG_H */