1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Copyright (C) 2016-2017 Socionext Inc.
8 /* Timers for fasp(TIMCLK) */
9 #define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */
12 * SDRAM (for initialize)
14 #define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
15 #define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
17 #define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */
18 #define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
20 #define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */
25 #define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */
28 * Hardware drivers support
32 #define CONFIG_SYS_I2C_RTC_ADDR 0x51
35 #define UART_CLK (62500000)
36 #define CONFIG_PL011_CLOCK UART_CLK
37 #define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
40 #define CONFIG_SYS_FLASH_BASE (0x08000000)
41 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
43 #define CONFIG_SYS_CBSIZE 1024
44 #define CONFIG_SYS_MAXARGS 128
45 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
47 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
49 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
50 "mtd nor1=u-boot.bin raw 200000 100000;" \
51 "fip.bin raw 180000 78000;" \
52 "optee.bin raw 500000 100000\0"
54 /* Distro boot settings */
55 #ifndef CONFIG_SPL_BUILD
57 #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
59 #define BOOT_TARGET_DEVICE_USB(func)
63 #define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0)
65 #define BOOT_TARGET_DEVICE_MMC(func)
68 #ifdef CONFIG_CMD_NVME
69 #define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0)
71 #define BOOT_TARGET_DEVICE_NVME(func)
74 #ifdef CONFIG_CMD_SCSI
75 #define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1)
77 #define BOOT_TARGET_DEVICE_SCSI(func)
80 #define BOOT_TARGET_DEVICES(func) \
81 BOOT_TARGET_DEVICE_USB(func) \
82 BOOT_TARGET_DEVICE_MMC(func) \
83 BOOT_TARGET_DEVICE_SCSI(func) \
84 BOOT_TARGET_DEVICE_NVME(func) \
86 #include <config_distro_bootcmd.h>
87 #else /* CONFIG_SPL_BUILD */
91 #define CONFIG_EXTRA_ENV_SETTINGS \
92 "fdt_addr_r=0x9fe00000\0" \
93 "kernel_addr_r=0x90000000\0" \
94 "ramdisk_addr_r=0xa0000000\0" \
95 "scriptaddr=0x88000000\0" \
96 "pxefile_addr_r=0x88100000\0" \
97 DEFAULT_DFU_ALT_INFO \
100 #endif /* __CONFIG_H */