include/configs/synquacer.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (C) 2016-2017 Socionext Inc.
   4  */
   5 #ifndef __CONFIG_H
   6 #define __CONFIG_H
   7
   8 /* Timers for fasp(TIMCLK) */
   9 #define CFG_SYS_TIMERBASE               0x31080000      /* AP Timer 1 (ARM-SP804) */
  10
  11 /*
  12  * SDRAM (for initialize)
  13  */
  14 #define CFG_SYS_SDRAM_BASE              (0x80000000)    /* Start address of DDR3 */
  15 #define PHYS_SDRAM_SIZE                 (0x7c000000)    /* Default size (2GB - Secure memory) */
  16
  17 #define CFG_MAX_MEM_MAPPED              PHYS_SDRAM_SIZE
  18
  19 #define SQ_DRAMINFO_BASE                (0x2e00ffc0)    /* DRAM info from TF-A */
  20
  21 /*
  22  * Boot info
  23  */
  24
  25 /*
  26  * Hardware drivers support
  27  */
  28
  29 /* RTC */
  30 #define CFG_SYS_I2C_RTC_ADDR            0x51
  31
  32 /* Serial (pl011)       */
  33 #define UART_CLK                        (62500000)
  34 #define CFG_PL011_CLOCK         UART_CLK
  35 #define CFG_PL01x_PORTS         {(void *)(0x2a400000)}
  36
  37 /* Support MTD */
  38 #define CFG_SYS_FLASH_BASE              (0x08000000)
  39 #define CFG_SYS_FLASH_BANKS_LIST        {CFG_SYS_FLASH_BASE}
  40
  41 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
  42
  43 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                            \
  44                         "mtd nor1=u-boot.bin raw 200000 100000;"        \
  45                         "fip.bin raw 180000 78000;"                     \
  46                         "optee.bin raw 500000 100000\0"
  47
  48 /* GUIDs for capsule updatable firmware images */
  49 #define DEVELOPERBOX_UBOOT_IMAGE_GUID \
  50         EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
  51                  0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
  52
  53 #define DEVELOPERBOX_FIP_IMAGE_GUID \
  54         EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
  55                  0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
  56
  57 #define DEVELOPERBOX_OPTEE_IMAGE_GUID \
  58         EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
  59                  0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
  60
  61 /* Distro boot settings */
  62 #ifdef CONFIG_CMD_USB
  63 #define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  64 #else
  65 #define BOOT_TARGET_DEVICE_USB(func)
  66 #endif
  67
  68 #ifdef CONFIG_CMD_MMC
  69 #define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0)
  70 #else
  71 #define BOOT_TARGET_DEVICE_MMC(func)
  72 #endif
  73
  74 #ifdef CONFIG_CMD_NVME
  75 #define BOOT_TARGET_DEVICE_NVME(func)   func(NVME, nvme, 0)
  76 #else
  77 #define BOOT_TARGET_DEVICE_NVME(func)
  78 #endif
  79
  80 #ifdef CONFIG_CMD_SCSI
  81 #define BOOT_TARGET_DEVICE_SCSI(func)   func(SCSI, scsi, 0) func(SCSI, scsi, 1)
  82 #else
  83 #define BOOT_TARGET_DEVICE_SCSI(func)
  84 #endif
  85
  86 #define BOOT_TARGET_DEVICES(func)       \
  87         BOOT_TARGET_DEVICE_USB(func)    \
  88         BOOT_TARGET_DEVICE_MMC(func)    \
  89         BOOT_TARGET_DEVICE_SCSI(func)   \
  90         BOOT_TARGET_DEVICE_NVME(func)   \
  91
  92 #include <config_distro_bootcmd.h>
  93
  94 #define CFG_EXTRA_ENV_SETTINGS          \
  95         "fdt_addr_r=0x9fe00000\0"               \
  96         "kernel_addr_r=0x90000000\0"            \
  97         "ramdisk_addr_r=0xa0000000\0"           \
  98         "scriptaddr=0x88000000\0"               \
  99         "pxefile_addr_r=0x88100000\0"           \
 100         DEFAULT_DFU_ALT_INFO                    \
 101         BOOTENV
 102
 103 #endif /* __CONFIG_H */