1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Copyright (C) 2016-2017 Socionext Inc.
8 /* Timers for fasp(TIMCLK) */
9 #define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */
12 * SDRAM (for initialize)
14 #define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
15 #define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
17 #define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */
18 #define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
20 #define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */
25 #define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */
28 * Hardware drivers support
32 #define CONFIG_SYS_I2C_RTC_ADDR 0x51
35 #define UART_CLK (62500000)
36 #define CONFIG_PL011_CLOCK UART_CLK
37 #define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
40 #define CONFIG_SYS_FLASH_BASE (0x08000000)
41 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
43 #define CONFIG_SYS_CBSIZE 1024
44 #define CONFIG_SYS_MAXARGS 128
45 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
47 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
49 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
50 "mtd nor1=u-boot.bin raw 200000 100000;" \
51 "fip.bin raw 180000 78000;" \
52 "optee.bin raw 500000 100000\0"
54 /* GUIDs for capsule updatable firmware images */
55 #define DEVELOPERBOX_UBOOT_IMAGE_GUID \
56 EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
57 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
59 #define DEVELOPERBOX_FIP_IMAGE_GUID \
60 EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
61 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
63 #define DEVELOPERBOX_OPTEE_IMAGE_GUID \
64 EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
65 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
67 /* Distro boot settings */
68 #ifndef CONFIG_SPL_BUILD
70 #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
72 #define BOOT_TARGET_DEVICE_USB(func)
76 #define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0)
78 #define BOOT_TARGET_DEVICE_MMC(func)
81 #ifdef CONFIG_CMD_NVME
82 #define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0)
84 #define BOOT_TARGET_DEVICE_NVME(func)
87 #ifdef CONFIG_CMD_SCSI
88 #define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1)
90 #define BOOT_TARGET_DEVICE_SCSI(func)
93 #define BOOT_TARGET_DEVICES(func) \
94 BOOT_TARGET_DEVICE_USB(func) \
95 BOOT_TARGET_DEVICE_MMC(func) \
96 BOOT_TARGET_DEVICE_SCSI(func) \
97 BOOT_TARGET_DEVICE_NVME(func) \
99 #include <config_distro_bootcmd.h>
100 #else /* CONFIG_SPL_BUILD */
104 #define CONFIG_EXTRA_ENV_SETTINGS \
105 "fdt_addr_r=0x9fe00000\0" \
106 "kernel_addr_r=0x90000000\0" \
107 "ramdisk_addr_r=0xa0000000\0" \
108 "scriptaddr=0x88000000\0" \
109 "pxefile_addr_r=0x88100000\0" \
110 DEFAULT_DFU_ALT_INFO \
113 #endif /* __CONFIG_H */