include/configs/stmark2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Sysam stmark2 board configuration
   4  *
   5  * (C) Copyright 2017  Angelo Dureghello <angelo@sysam.it>
   6  */
   7
   8 #ifndef __STMARK2_CONFIG_H
   9 #define __STMARK2_CONFIG_H
  10
  11 #define CONFIG_HOSTNAME                 "stmark2"
  12
  13 #define CONFIG_MCFUART
  14 #define CONFIG_SYS_UART_PORT            0
  15 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  16
  17 #define LDS_BOARD_TEXT                                          \
  18         board/sysam/stmark2/sbf_dram_init.o (.text*)
  19
  20 #define CONFIG_TIMESTAMP
  21
  22 #define CONFIG_BOOTCOMMAND                                      \
  23         "sf probe 0:1 50000000; "                               \
  24         "sf read ${loadaddr} 0x100000 ${kern_size}; "           \
  25         "bootm ${loadaddr}"
  26
  27 #define CONFIG_EXTRA_ENV_SETTINGS                               \
  28         "kern_size=0x700000\0"                                  \
  29         "loadaddr=0x40001000\0"                                 \
  30                 "-(rootfs)\0"                                   \
  31         "update_uboot=loady ${loadaddr}; "                      \
  32                 "sf probe 0:1 50000000; "                       \
  33                 "sf erase 0 0x80000; "                          \
  34                 "sf write ${loadaddr} 0 ${filesize}\0"          \
  35         "update_kernel=loady ${loadaddr}; "                     \
  36                 "setenv kern_size ${filesize}; saveenv; "       \
  37                 "sf probe 0:1 50000000; "                       \
  38                 "sf erase 0x100000 0x700000; "                  \
  39                 "sf write ${loadaddr} 0x100000 ${filesize}\0"   \
  40         "update_rootfs=loady ${loadaddr}; "                     \
  41                 "sf probe 0:1 50000000; "                       \
  42                 "sf erase 0x00800000 0x100000; "                \
  43                 "sf write ${loadaddr} 0x00800000 ${filesize}\0" \
  44         ""
  45
  46 /* Realtime clock */
  47 #undef CONFIG_MCFRTC
  48 #define CONFIG_RTC_MCFRRTC
  49 #define CONFIG_SYS_MCFRRTC_BASE         0xFC0A8000
  50
  51 /* spi not partitions */
  52 #define CONFIG_JFFS2_DEV                "nor0"
  53
  54 /* Timer */
  55 #define CONFIG_MCFTMR
  56
  57 /* DSPI and Serial Flash */
  58 #define CONFIG_CF_DSPI
  59 #define CONFIG_SERIAL_FLASH
  60
  61 #define CONFIG_SYS_SBFHDR_SIZE          0x7
  62
  63 /* Input, PCI, Flexbus, and VCO */
  64 #define CONFIG_EXTRA_CLOCK
  65
  66 #define CONFIG_PRAM                     2048    /* 2048 KB */
  67 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
  68
  69 /* Print Buffer Size */
  70 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  71                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  72 #define CONFIG_SYS_MAXARGS              16
  73 /* Boot Argument Buffer Size    */
  74 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  75
  76 #define CONFIG_SYS_MBAR                 0xFC000000
  77
  78 /*
  79  * Definitions for initial stack pointer and data area (in internal SRAM)
  80  */
  81 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
  82 /* End of used area in internal SRAM */
  83 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  84 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
  85 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - \
  86                                         GENERATED_GBL_DATA_SIZE) - 32)
  87 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  88 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
  89
  90 /*
  91  * Start addresses for the final memory configuration
  92  * (Set up by the startup code)
  93  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  94  */
  95 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  96 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
  97
  98 #define CONFIG_SYS_DRAM_TEST
  99
 100 #if defined(CONFIG_CF_SBF)
 101 #define CONFIG_SERIAL_BOOT
 102 #endif
 103
 104 #if defined(CONFIG_SERIAL_BOOT)
 105 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_TEXT_BASE + 0x400)
 106 #else
 107 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
 108 #endif
 109
 110 #define CONFIG_SYS_BOOTPARAMS_LEN       (64 * 1024)
 111 /* Reserve 256 kB for Monitor */
 112 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 113 /* Reserve 256 kB for malloc() */
 114 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 115
 116 /*
 117  * For booting Linux, the board info and command line data
 118  * have to be in the first 8 MB of memory, since this is
 119  * the maximum mapped by the Linux kernel during initialization ??
 120  */
 121 /* Initial Memory map for Linux */
 122 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + \
 123                                         (CONFIG_SYS_SDRAM_SIZE << 20))
 124
 125 /* Configuration for environment
 126  * Environment is embedded in u-boot in the second sector of the flash
 127  */
 128
 129 #if defined(CONFIG_CF_SBF)
 130 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
 131 #endif
 132
 133 /* Cache Configuration */
 134 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 135                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 136 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 137                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 138 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 139 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 140 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 141                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 142                                          CF_ACR_EN | CF_ACR_SM_ALL)
 143 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 144                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 145 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 146                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 147                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 148
 149 #define CACR_STATUS                     (CONFIG_SYS_INIT_RAM_ADDR + \
 150                                         CONFIG_SYS_INIT_RAM_SIZE - 12)
 151
 152 #ifdef CONFIG_MCFFEC
 153 #define CONFIG_MII_INIT                 1
 154 #define CONFIG_SYS_DISCOVER_PHY
 155 #define CONFIG_SYS_RX_ETH_BUFFER        8
 156 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 157 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 158 #ifndef CONFIG_SYS_DISCOVER_PHY
 159 #define FECDUPLEX                       FULL
 160 #define FECSPEED                        _100BASET
 161 #else
 162 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 163 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 164 #endif
 165 #endif /* CONFIG_SYS_DISCOVER_PHY */
 166 #endif
 167 #endif /* __STMARK2_CONFIG_H */