include/configs/stmark2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Sysam stmark2 board configuration
   4  *
   5  * (C) Copyright 2017  Angelo Dureghello <angelo@sysam.it>
   6  */
   7
   8 #ifndef __STMARK2_CONFIG_H
   9 #define __STMARK2_CONFIG_H
  10
  11 #define CONFIG_HOSTNAME                 "stmark2"
  12
  13 #define CONFIG_SYS_UART_PORT            0
  14
  15 #define LDS_BOARD_TEXT                                          \
  16         board/sysam/stmark2/sbf_dram_init.o (.text*)
  17
  18 #define CONFIG_EXTRA_ENV_SETTINGS                               \
  19         "kern_size=0x700000\0"                                  \
  20         "loadaddr=0x40001000\0"                                 \
  21                 "-(rootfs)\0"                                   \
  22         "update_uboot=loady ${loadaddr}; "                      \
  23                 "sf probe 0:1 50000000; "                       \
  24                 "sf erase 0 0x80000; "                          \
  25                 "sf write ${loadaddr} 0 ${filesize}\0"          \
  26         "update_kernel=loady ${loadaddr}; "                     \
  27                 "setenv kern_size ${filesize}; saveenv; "       \
  28                 "sf probe 0:1 50000000; "                       \
  29                 "sf erase 0x100000 0x700000; "                  \
  30                 "sf write ${loadaddr} 0x100000 ${filesize}\0"   \
  31         "update_rootfs=loady ${loadaddr}; "                     \
  32                 "sf probe 0:1 50000000; "                       \
  33                 "sf erase 0x00800000 0x100000; "                \
  34                 "sf write ${loadaddr} 0x00800000 ${filesize}\0" \
  35         ""
  36
  37 /* Realtime clock */
  38 #define CONFIG_RTC_MCFRRTC
  39 #define CONFIG_SYS_MCFRRTC_BASE         0xFC0A8000
  40
  41 #define CONFIG_SYS_SBFHDR_SIZE          0x7
  42
  43 /* Input, PCI, Flexbus, and VCO */
  44 #define CONFIG_EXTRA_CLOCK
  45
  46 #define CONFIG_PRAM                     2048    /* 2048 KB */
  47
  48 #define CONFIG_SYS_MBAR                 0xFC000000
  49
  50 /*
  51  * Definitions for initial stack pointer and data area (in internal SRAM)
  52  */
  53 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
  54 /* End of used area in internal SRAM */
  55 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  56 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
  57 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - \
  58                                         GENERATED_GBL_DATA_SIZE) - 32)
  59 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  60 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
  61
  62 /*
  63  * Start addresses for the final memory configuration
  64  * (Set up by the startup code)
  65  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  66  */
  67 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  68 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
  69
  70 #define CONFIG_SYS_DRAM_TEST
  71
  72 #if defined(CONFIG_CF_SBF)
  73 #define CONFIG_SERIAL_BOOT
  74 #endif
  75
  76 #define CONFIG_SYS_BOOTPARAMS_LEN       (64 * 1024)
  77 /* Reserve 256 kB for Monitor */
  78 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
  79
  80 /*
  81  * For booting Linux, the board info and command line data
  82  * have to be in the first 8 MB of memory, since this is
  83  * the maximum mapped by the Linux kernel during initialization ??
  84  */
  85 /* Initial Memory map for Linux */
  86 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + \
  87                                         (CONFIG_SYS_SDRAM_SIZE << 20))
  88
  89 /* Configuration for environment
  90  * Environment is embedded in u-boot in the second sector of the flash
  91  */
  92
  93 /* Cache Configuration */
  94 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
  95                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
  96 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
  97                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
  98 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
  99 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 100 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 101                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 102                                          CF_ACR_EN | CF_ACR_SM_ALL)
 103 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 104                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 105 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 106                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 107                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 108
 109 #define CACR_STATUS                     (CONFIG_SYS_INIT_RAM_ADDR + \
 110                                         CONFIG_SYS_INIT_RAM_SIZE - 12)
 111
 112 #ifdef CONFIG_MCFFEC
 113 #define CONFIG_SYS_DISCOVER_PHY
 114 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 115 #ifndef CONFIG_SYS_DISCOVER_PHY
 116 #define FECDUPLEX                       FULL
 117 #define FECSPEED                        _100BASET
 118 #endif /* CONFIG_SYS_DISCOVER_PHY */
 119 #endif
 120 #endif /* __STMARK2_CONFIG_H */