MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig
[platform/kernel/u-boot.git] / include / configs / stm32mp15_st_common.h
1 /* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
4  *
5  * Configuration settings for the STMicroelectronics STM32MP15x boards
6  */
7
8 #ifndef __CONFIG_STM32MP15_ST_COMMON_H__
9 #define __CONFIG_STM32MP15_ST_COMMON_H__
10
11 #define STM32MP_BOARD_EXTRA_ENV \
12         "console=ttySTM0\0"
13
14 #include <configs/stm32mp15_common.h>
15
16 /* uart with on-board st-link */
17 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, \
18                                          230400, 460800, 921600, \
19                                          1000000, 2000000 }
20
21 #ifdef CONFIG_EXTRA_ENV_SETTINGS
22 /*
23  * default bootcmd for stm32mp1 STMicroelectronics boards:
24  * for serial/usb: execute the stm32prog command
25  * for mmc boot (eMMC, SD card), distro boot on the same mmc device
26  * for nand or spi-nand boot, distro boot with ubifs on UBI partition
27  * for nor boot, distro boot on SD card = mmc0 ONLY !
28  */
29 #define ST_STM32MP1_BOOTCMD "bootcmd_stm32mp=" \
30         "echo \"Boot over ${boot_device}${boot_instance}!\";" \
31         "if test ${boot_device} = serial || test ${boot_device} = usb;" \
32         "then stm32prog ${boot_device} ${boot_instance}; " \
33         "else " \
34                 "run env_check;" \
35                 "if test ${boot_device} = mmc;" \
36                 "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
37                 "if test ${boot_device} = nand ||" \
38                   " test ${boot_device} = spi-nand ;" \
39                 "then env set boot_targets ubifs0; fi;" \
40                 "if test ${boot_device} = nor;" \
41                 "then env set boot_targets mmc0; fi;" \
42                 "run distro_bootcmd;" \
43         "fi;\0"
44
45 #undef CONFIG_EXTRA_ENV_SETTINGS
46 #define CONFIG_EXTRA_ENV_SETTINGS \
47         STM32MP_MEM_LAYOUT \
48         ST_STM32MP1_BOOTCMD \
49         STM32MP_PARTS_DEFAULT \
50         BOOTENV \
51         STM32MP_EXTRA \
52         STM32MP_BOARD_EXTRA_ENV
53
54 #endif
55 #endif