include/configs/stm32mp1.h

   1 /* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
   2 /*
   3  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
   4  *
   5  * Configuration settings for the STM32MP15x CPU
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10 #include <linux/sizes.h>
  11 #include <asm/arch/stm32.h>
  12
  13 #ifndef CONFIG_STM32MP1_TRUSTED
  14 /* PSCI support */
  15 #define CONFIG_ARMV7_PSCI_1_0
  16 #define CONFIG_ARMV7_SECURE_BASE                STM32_SYSRAM_BASE
  17 #define CONFIG_ARMV7_SECURE_MAX_SIZE            STM32_SYSRAM_SIZE
  18 #endif
  19
  20 /*
  21  * Configuration of the external SRAM memory used by U-Boot
  22  */
  23 #define CONFIG_SYS_SDRAM_BASE                   STM32_DDR_BASE
  24 #define CONFIG_SYS_INIT_SP_ADDR                 CONFIG_SYS_TEXT_BASE
  25
  26 #ifdef CONFIG_STM32MP1_OPTEE
  27 #define CONFIG_SYS_MEM_TOP_HIDE                 SZ_32M
  28 #endif /* CONFIG_STM32MP1_OPTEE */
  29
  30 /*
  31  * Console I/O buffer size
  32  */
  33 #define CONFIG_SYS_CBSIZE                       SZ_1K
  34
  35 /*
  36  * Needed by "loadb"
  37  */
  38 #define CONFIG_SYS_LOAD_ADDR                    STM32_DDR_BASE
  39
  40 /* ATAGs */
  41 #define CONFIG_CMDLINE_TAG
  42 #define CONFIG_SETUP_MEMORY_TAGS
  43 #define CONFIG_INITRD_TAG
  44
  45 /* Extend size of kernel image for uncompression */
  46 #define CONFIG_SYS_BOOTM_LEN                    SZ_32M
  47
  48 /* SPL support */
  49 #ifdef CONFIG_SPL
  50 /* SPL use DDR */
  51 #define CONFIG_SPL_BSS_START_ADDR       0xC0200000
  52 #define CONFIG_SPL_BSS_MAX_SIZE         0x00100000
  53 #define CONFIG_SYS_SPL_MALLOC_START     0xC0300000
  54 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00100000
  55
  56 /* limit SYSRAM usage to first 128 KB */
  57 #define CONFIG_SPL_MAX_SIZE             0x00020000
  58 #define CONFIG_SPL_STACK                (STM32_SYSRAM_BASE + \
  59                                          STM32_SYSRAM_SIZE)
  60 #endif /* #ifdef CONFIG_SPL */
  61
  62 #define CONFIG_SYS_MEMTEST_START        STM32_DDR_BASE
  63 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_64M)
  64 #define CONFIG_SYS_MEMTEST_SCRATCH      (CONFIG_SYS_MEMTEST_END + 4)
  65
  66 /*MMC SD*/
  67 #define CONFIG_SYS_MMC_MAX_DEVICE       3
  68
  69 /* NAND support */
  70 #define CONFIG_SYS_NAND_ONFI_DETECTION
  71 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  72
  73 /* Ethernet need */
  74 #ifdef CONFIG_DWC_ETH_QOS
  75 #define CONFIG_SYS_NONCACHED_MEMORY     (1 * SZ_1M)     /* 1M */
  76 #define CONFIG_SERVERIP                 192.168.1.1
  77 #define CONFIG_BOOTP_SERVERIP
  78 #define CONFIG_SYS_AUTOLOAD             "no"
  79 #endif
  80
  81 /* Dynamic MTD partition support */
  82 #if defined(CONFIG_STM32_QSPI) || defined(CONFIG_NAND_STM32_FMC2)
  83 #define CONFIG_SYS_MTDPARTS_RUNTIME
  84 #endif
  85
  86 #define CONFIG_SET_DFU_ALT_INFO
  87
  88 #ifdef CONFIG_DM_VIDEO
  89 #define CONFIG_VIDEO_BMP_RLE8
  90 #define CONFIG_BMP_16BPP
  91 #define CONFIG_BMP_24BPP
  92 #define CONFIG_BMP_32BPP
  93 #endif
  94
  95 /*****************************************************************************/
  96 #ifdef CONFIG_DISTRO_DEFAULTS
  97 /*****************************************************************************/
  98
  99 #if !defined(CONFIG_SPL_BUILD)
 100
 101 #define BOOT_TARGET_DEVICES(func) \
 102         func(MMC, mmc, 1) \
 103         func(UBIFS, ubifs, 0) \
 104         func(MMC, mmc, 0) \
 105         func(MMC, mmc, 2) \
 106         func(PXE, pxe, na)
 107
 108 /*
 109  * bootcmd for stm32mp1:
 110  * for serial/usb: execute the stm32prog command
 111  * for mmc boot (eMMC, SD card), boot only on the same device
 112  * for nand boot, boot with on ubifs partition on nand
 113  * for nor boot, use the default order
 114  */
 115 #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
 116         "echo \"Boot over ${boot_device}${boot_instance}!\";" \
 117         "if test ${boot_device} = serial || test ${boot_device} = usb;" \
 118         "then stm32prog ${boot_device} ${boot_instance}; " \
 119         "else " \
 120                 "run env_check;" \
 121                 "if test ${boot_device} = mmc;" \
 122                 "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
 123                 "if test ${boot_device} = nand;" \
 124                 "then env set boot_targets ubifs0; fi;" \
 125                 "run distro_bootcmd;" \
 126         "fi;\0"
 127
 128 #include <config_distro_bootcmd.h>
 129
 130 #ifdef CONFIG_STM32MP1_OPTEE
 131 /* with OPTEE: define specific MTD partitions = teeh, teed, teex */
 132 #define STM32MP_MTDPARTS \
 133         "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),256k(teeh),256k(teed),256k(teex),-(nor_user)\0" \
 134         "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),512k(teeh),512k(teed),512k(teex),-(UBI)\0" \
 135         "mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),"\
 136                 "512k(teeh),512k(teed),512k(teex),-(UBI)\0"
 137
 138 #else /* CONFIG_STM32MP1_OPTEE */
 139 #define STM32MP_MTDPARTS \
 140         "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \
 141         "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0" \
 142         "mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0"
 143
 144 #endif /* CONFIG_STM32MP1_OPTEE */
 145
 146 #ifndef CONFIG_SYS_MTDPARTS_RUNTIME
 147 #undef STM32MP_MTDPARTS
 148 #define STM32MP_MTDPARTS
 149 #endif
 150
 151 #define STM32MP_DFU_ALT_RAM \
 152         "dfu_alt_info_ram=ram 0=" \
 153                 "uImage ram ${kernel_addr_r} 0x2000000;" \
 154                 "devicetree.dtb ram ${fdt_addr_r} 0x100000;" \
 155                 "uramdisk.image.gz ram ${ramdisk_addr_r} 0x10000000\0"
 156
 157 #ifdef CONFIG_SET_DFU_ALT_INFO
 158 #define STM32MP_DFU_ALT_INFO \
 159         "dfu_alt_info_nor0=mtd nor0=" \
 160                 "nor_fsbl1 part 1;nor_fsbl2 part 2;" \
 161                 "nor_ssbl part 3;nor_env part 4\0" \
 162         "dfu_alt_info_nand0=mtd nand0="\
 163                 "nand_fsbl part 1;nand_ssbl1 part 2;" \
 164                 "nand_ssbl2 part 3;nand_UBI partubi 4\0" \
 165         "dfu_alt_info_spi-nand0=mtd spi-nand0="\
 166                 "spi-nand_fsbl part 1;spi-nand_ssbl1 part 2;" \
 167                 "spi-nand_ssbl2 part 3;spi-nand_UBI partubi 4\0" \
 168         "dfu_alt_info_mmc0=mmc 0=" \
 169                 "sdcard_fsbl1 part 0 1;sdcard_fsbl2 part 0 2;" \
 170                 "sdcard_ssbl part 0 3;sdcard_bootfs part 0 4;" \
 171                 "sdcard_vendorfs part 0 5;sdcard_rootfs part 0 6;" \
 172                 "sdcard_userfs part 0 7\0" \
 173         "dfu_alt_info_mmc1=mmc 1=" \
 174                 "emmc_fsbl1 raw 0x0 0x200 mmcpart 1;" \
 175                 "emmc_fsbl2 raw 0x0 0x200 mmcpart 2;emmc_ssbl part 1 1;" \
 176                 "emmc_bootfs part 1 2;emmc_vendorfs part 1 3;" \
 177                 "emmc_rootfs part 1 4;emmc_userfs part 1 5\0"
 178 #else
 179 #define STM32MP_DFU_ALT_INFO
 180 #endif
 181
 182 /*
 183  * memory layout for 32M uncompressed/compressed kernel,
 184  * 1M fdt, 1M script, 1M pxe and 1M for splashimage
 185  * and the ramdisk at the end.
 186  */
 187 #define CONFIG_EXTRA_ENV_SETTINGS \
 188         "bootdelay=1\0" \
 189         "kernel_addr_r=0xc2000000\0" \
 190         "fdt_addr_r=0xc4000000\0" \
 191         "scriptaddr=0xc4100000\0" \
 192         "pxefile_addr_r=0xc4200000\0" \
 193         "splashimage=0xc4300000\0"  \
 194         "ramdisk_addr_r=0xc4400000\0" \
 195         "fdt_high=0xffffffff\0" \
 196         "initrd_high=0xffffffff\0" \
 197         "altbootcmd=run bootcmd\0" \
 198         "env_default=1\0" \
 199         "env_check=if test $env_default -eq 1;"\
 200                 " then env set env_default 0;env save;fi\0" \
 201         STM32MP_BOOTCMD \
 202         STM32MP_MTDPARTS \
 203         STM32MP_DFU_ALT_RAM \
 204         STM32MP_DFU_ALT_INFO \
 205         BOOTENV \
 206         "boot_net_usb_start=true\0"
 207
 208 #endif /* ifndef CONFIG_SPL_BUILD */
 209 #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
 210
 211 #endif /* __CONFIG_H */