1 /* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
3 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
5 * Configuration settings for the STM32MP15x CPU
10 #include <linux/sizes.h>
11 #include <asm/arch/stm32.h>
13 #ifndef CONFIG_TFABOOT
15 #define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
16 #define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
20 * Configuration of the external SRAM memory used by U-Boot
22 #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
23 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
26 * Console I/O buffer size
28 #define CONFIG_SYS_CBSIZE SZ_1K
31 * For booting Linux, use the first 256 MB of memory, since this is
32 * the maximum mapped by the Linux kernel during initialization.
34 #define CONFIG_SYS_BOOTMAPSZ SZ_256M
36 /* Extend size of kernel image for uncompression */
37 #define CONFIG_SYS_BOOTM_LEN SZ_32M
42 #define CONFIG_SYS_SPL_MALLOC_START 0xC0300000
43 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x01D00000
45 /* Restrict SPL to fit within SYSRAM */
46 #define STM32_SYSRAM_END (STM32_SYSRAM_BASE + STM32_SYSRAM_SIZE)
47 #define CONFIG_SPL_MAX_FOOTPRINT (STM32_SYSRAM_END - CONFIG_SPL_TEXT_BASE)
48 #define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \
50 #endif /* #ifdef CONFIG_SPL */
52 #define CONFIG_SYS_MMC_MAX_DEVICE 3
55 #define CONFIG_SYS_NAND_ONFI_DETECTION
56 #define CONFIG_SYS_MAX_NAND_DEVICE 1
59 #ifdef CONFIG_DWC_ETH_QOS
60 #define CONFIG_SERVERIP 192.168.1.1
61 #define CONFIG_BOOTP_SERVERIP
62 #define CONFIG_SYS_AUTOLOAD "no"
65 /*****************************************************************************/
66 #ifdef CONFIG_DISTRO_DEFAULTS
67 /*****************************************************************************/
69 #if !defined(CONFIG_SPL_BUILD)
72 #define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0)
73 #define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1)
74 #define BOOT_TARGET_MMC2(func) func(MMC, mmc, 2)
76 #define BOOT_TARGET_MMC0(func)
77 #define BOOT_TARGET_MMC1(func)
78 #define BOOT_TARGET_MMC2(func)
82 #define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
84 #define BOOT_TARGET_PXE(func)
87 #ifdef CONFIG_CMD_UBIFS
88 #define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0)
90 #define BOOT_TARGET_UBIFS(func)
94 #define BOOT_TARGET_USB(func) func(USB, usb, 0)
96 #define BOOT_TARGET_USB(func)
99 #define BOOT_TARGET_DEVICES(func) \
100 BOOT_TARGET_MMC1(func) \
101 BOOT_TARGET_UBIFS(func) \
102 BOOT_TARGET_MMC0(func) \
103 BOOT_TARGET_MMC2(func) \
104 BOOT_TARGET_USB(func) \
105 BOOT_TARGET_PXE(func)
108 * bootcmd for stm32mp1:
109 * for serial/usb: execute the stm32prog command
110 * for mmc boot (eMMC, SD card), boot only on the same device
111 * for nand or spi-nand boot, boot with on ubifs partition on UBI partition
112 * for nor boot, use SD card = mmc0
114 #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
115 "echo \"Boot over ${boot_device}${boot_instance}!\";" \
116 "if test ${boot_device} = serial || test ${boot_device} = usb;" \
117 "then stm32prog ${boot_device} ${boot_instance}; " \
120 "if test ${boot_device} = mmc;" \
121 "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
122 "if test ${boot_device} = nand ||" \
123 " test ${boot_device} = spi-nand ;" \
124 "then env set boot_targets ubifs0; fi;" \
125 "if test ${boot_device} = nor;" \
126 "then env set boot_targets mmc0; fi;" \
127 "run distro_bootcmd;" \
130 #ifdef CONFIG_FASTBOOT_CMD_OEM_FORMAT
131 /* eMMC default partitions for fastboot command: oem format */
132 #define PARTS_DEFAULT \
134 "name=ssbl,size=2M;" \
135 "name=bootfs,size=64MB,bootable;" \
136 "name=vendorfs,size=16M;" \
137 "name=rootfs,size=746M;" \
138 "name=userfs,size=-\0"
140 #define PARTS_DEFAULT
143 #include <config_distro_bootcmd.h>
146 * memory layout for 32M uncompressed/compressed kernel,
147 * 1M fdt, 1M script, 1M pxe and 1M for overlay
148 * and the ramdisk at the end.
150 #define CONFIG_EXTRA_ENV_SETTINGS \
151 "kernel_addr_r=0xc2000000\0" \
152 "fdt_addr_r=0xc4000000\0" \
153 "scriptaddr=0xc4100000\0" \
154 "pxefile_addr_r=0xc4200000\0" \
155 "fdtoverlay_addr_r=0xc4300000\0" \
156 "ramdisk_addr_r=0xc4400000\0" \
157 "altbootcmd=run bootcmd\0" \
158 "env_check=if env info -p -d -q; then env save; fi\0" \
162 "boot_net_usb_start=true\0"
164 #endif /* ifndef CONFIG_SPL_BUILD */
165 #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
167 #endif /* __CONFIG_H */