include/configs/spear-common.h

   1 /*
   2  * (C) Copyright 2009
   3  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _SPEAR_COMMON_H
   9 #define _SPEAR_COMMON_H
  10 /*
  11  * Common configurations used for both spear3xx as well as spear6xx
  12  */
  13
  14
  15 /* U-boot Load Address */
  16 #define CONFIG_SYS_TEXT_BASE                    0x00700000
  17
  18 /* Ethernet driver configuration */
  19 #define CONFIG_MII
  20 #define CONFIG_PHYLIB
  21 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
  22 #define CONFIG_PHY_GIGE                 /* Include GbE speed/duplex detection */
  23
  24 /* USBD driver configuration */
  25 #if defined(CONFIG_SPEAR_USBTTY)
  26 #define CONFIG_DW_UDC
  27 #define CONFIG_USB_DEVICE
  28 #define CONFIG_USBD_HS
  29 #define CONFIG_USB_TTY
  30
  31 #define CONFIG_USBD_PRODUCT_NAME                "SPEAr SoC"
  32 #define CONFIG_USBD_MANUFACTURER                "ST Microelectronics"
  33
  34 #endif
  35
  36 #define CONFIG_EXTRA_ENV_USBTTY                 "usbtty=cdc_acm\0"
  37
  38 /* I2C driver configuration */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_DW
  41 #if defined(CONFIG_SPEAR600)
  42 #define CONFIG_SYS_I2C_BASE                     0xD0200000
  43 #elif defined(CONFIG_SPEAR300)
  44 #define CONFIG_SYS_I2C_BASE                     0xD0180000
  45 #elif defined(CONFIG_SPEAR310)
  46 #define CONFIG_SYS_I2C_BASE                     0xD0180000
  47 #elif defined(CONFIG_SPEAR320)
  48 #define CONFIG_SYS_I2C_BASE                     0xD0180000
  49 #endif
  50 #define CONFIG_SYS_I2C_SPEED                    400000
  51 #define CONFIG_SYS_I2C_SLAVE                    0x02
  52
  53 #define CONFIG_I2C_CHIPADDRESS                  0x50
  54
  55 /* Timer, HZ specific defines */
  56
  57 /* Flash configuration */
  58 #if defined(CONFIG_FLASH_PNOR)
  59 #define CONFIG_SPEAR_EMI
  60 #else
  61 #define CONFIG_ST_SMI
  62 #endif
  63
  64 #if defined(CONFIG_ST_SMI)
  65
  66 #define CONFIG_SYS_MAX_FLASH_BANKS              2
  67 #define CONFIG_SYS_FLASH_BASE                   0xF8000000
  68 #define CONFIG_SYS_CS1_FLASH_BASE               0xF9000000
  69 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
  70 #define CONFIG_SYS_FLASH_ADDR_BASE              {CONFIG_SYS_FLASH_BASE, \
  71                                                 CONFIG_SYS_CS1_FLASH_BASE}
  72 #define CONFIG_SYS_MAX_FLASH_SECT               128
  73
  74 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
  75 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
  76
  77 #endif
  78
  79 /*
  80  * Serial Configuration (PL011)
  81  * CONFIG_PL01x_PORTS is defined in specific files
  82  */
  83 #define CONFIG_PL011_SERIAL
  84 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
  85 #define CONFIG_CONS_INDEX                       0
  86 #define CONFIG_BAUDRATE                         115200
  87 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
  88                                                 57600, 115200 }
  89
  90 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  91
  92 /* NAND FLASH Configuration */
  93 #define CONFIG_SYS_NAND_SELF_INIT
  94 #define CONFIG_MTD_DEVICE
  95 #define CONFIG_MTD_PARTITIONS
  96 #define CONFIG_NAND_FSMC
  97 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  98 #define CONFIG_SYS_NAND_ONFI_DETECTION
  99
 100 /*
 101  * Command support defines
 102  */
 103 #define CONFIG_CMD_I2C
 104 #define CONFIG_CMD_NAND
 105 #define CONFIG_CMD_ENV
 106 #define CONFIG_CMD_SAVES
 107 #define CONFIG_CMD_MII
 108 #define CONFIG_CMD_PING
 109 #define CONFIG_CMD_DHCP
 110
 111 /*
 112  * Default Environment Varible definitions
 113  */
 114 #if defined(CONFIG_SPEAR_USBTTY)
 115 #define CONFIG_BOOTDELAY                        -1
 116 #else
 117 #define CONFIG_BOOTDELAY                        1
 118 #endif
 119
 120 #define CONFIG_ENV_OVERWRITE
 121
 122 /*
 123  * U-Boot Environment placing definitions.
 124  */
 125 #if defined(CONFIG_ENV_IS_IN_FLASH)
 126 #ifdef CONFIG_ST_SMI
 127 /*
 128  * Environment is in serial NOR flash
 129  */
 130 #define CONFIG_SYS_MONITOR_LEN                  0x00040000
 131 #define CONFIG_ENV_SECT_SIZE                    0x00010000
 132 #define CONFIG_FSMTDBLK                         "/dev/mtdblock3 "
 133
 134 #define CONFIG_BOOTCOMMAND                      "bootm 0xf8050000"
 135
 136 #elif defined(CONFIG_SPEAR_EMI)
 137 /*
 138  * Environment is in parallel NOR flash
 139  */
 140 #define CONFIG_SYS_MONITOR_LEN                  0x00060000
 141 #define CONFIG_ENV_SECT_SIZE                    0x00020000
 142 #define CONFIG_FSMTDBLK                         "/dev/mtdblock3 "
 143
 144 #define CONFIG_BOOTCOMMAND                      "cp.b 0x50080000 0x1600000 " \
 145                                                 "0x4C0000; bootm 0x1600000"
 146 #endif
 147
 148 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_FLASH_BASE + \
 149                                                 CONFIG_SYS_MONITOR_LEN)
 150 #elif defined(CONFIG_ENV_IS_IN_NAND)
 151 /*
 152  * Environment is in NAND
 153  */
 154
 155 #define CONFIG_ENV_OFFSET                       0x60000
 156 #define CONFIG_ENV_RANGE                        0x10000
 157 #define CONFIG_FSMTDBLK                         "/dev/mtdblock7 "
 158
 159 #define CONFIG_BOOTCOMMAND                      "nand read.jffs2 0x1600000 " \
 160                                                 "0x80000 0x4C0000; " \
 161                                                 "bootm 0x1600000"
 162 #endif
 163
 164 #define CONFIG_BOOTARGS                         "console=ttyAMA0,115200 " \
 165                                                 "mem=128M " \
 166                                                 "root="CONFIG_FSMTDBLK \
 167                                                 "rootfstype=jffs2"
 168
 169 #define CONFIG_NFSBOOTCOMMAND                                           \
 170         "bootp; "                                                       \
 171         "setenv bootargs root=/dev/nfs rw "                             \
 172         "nfsroot=$(serverip):$(rootpath) "                              \
 173         "ip=$(ipaddr):$(serverip):$(gatewayip):"                        \
 174                         "$(netmask):$(hostname):$(netdev):off "         \
 175                         "console=ttyAMA0,115200 $(othbootargs);"        \
 176         "bootm; "
 177
 178 #define CONFIG_RAMBOOTCOMMAND                                           \
 179         "setenv bootargs root=/dev/ram rw "                             \
 180                 "console=ttyAMA0,115200 $(othbootargs);"                \
 181         CONFIG_BOOTCOMMAND
 182
 183
 184 #define CONFIG_ENV_SIZE                         0x02000
 185 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_TEXT_BASE
 186
 187 /* Miscellaneous configurable options */
 188 #define CONFIG_ARCH_CPU_INIT
 189 #define CONFIG_BOARD_EARLY_INIT_F
 190 #define CONFIG_DISPLAY_CPUINFO
 191 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
 192 #define CONFIG_CMDLINE_TAG
 193 #define CONFIG_SETUP_MEMORY_TAGS
 194 #define CONFIG_MISC_INIT_R
 195 #define CONFIG_ZERO_BOOTDELAY_CHECK
 196
 197 #define CONFIG_SYS_MEMTEST_START                0x00800000
 198 #define CONFIG_SYS_MEMTEST_END                  0x04000000
 199 #define CONFIG_SYS_MALLOC_LEN                   (1024*1024)
 200 #define CONFIG_IDENT_STRING                     "-SPEAr"
 201 #define CONFIG_SYS_LONGHELP
 202 #define CONFIG_CMDLINE_EDITING
 203 #define CONFIG_SYS_CBSIZE                       256
 204 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
 205                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 206 #define CONFIG_SYS_MAXARGS                      16
 207 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
 208 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
 209 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 210
 211 #define CONFIG_SYS_FLASH_EMPTY_INFO
 212
 213 /* Physical Memory Map */
 214 #define CONFIG_NR_DRAM_BANKS                    1
 215 #define PHYS_SDRAM_1                            0x00000000
 216 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
 217
 218 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
 219 #define CONFIG_SYS_INIT_RAM_ADDR                0xD2800000
 220 #define CONFIG_SYS_INIT_RAM_SIZE                0x2000
 221
 222 #define CONFIG_SYS_INIT_SP_OFFSET               \
 223         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 224
 225 #define CONFIG_SYS_INIT_SP_ADDR                 \
 226         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 227
 228 #endif