include/configs/spear-common.h

   1 /*
   2  * (C) Copyright 2009
   3  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _SPEAR_COMMON_H
   9 #define _SPEAR_COMMON_H
  10 /*
  11  * Common configurations used for both spear3xx as well as spear6xx
  12  */
  13
  14 /* U-boot Load Address */
  15 #define CONFIG_SYS_TEXT_BASE                    0x00700000
  16
  17 /* Ethernet driver configuration */
  18 #define CONFIG_MII
  19 #define CONFIG_DESIGNWARE_ETH
  20 #define CONFIG_NET_MULTI
  21 #define CONFIG_PHYLIB
  22 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
  23 #define CONFIG_PHY_GIGE                 /* Include GbE speed/duplex detection */
  24
  25 /* USBD driver configuration */
  26 #if defined(CONFIG_SPEAR_USBTTY)
  27 #define CONFIG_DW_UDC
  28 #define CONFIG_USB_DEVICE
  29 #define CONFIG_USBD_HS
  30 #define CONFIG_USB_TTY
  31
  32 #define CONFIG_USBD_PRODUCT_NAME                "SPEAr SoC"
  33 #define CONFIG_USBD_MANUFACTURER                "ST Microelectronics"
  34
  35 #endif
  36
  37 #define CONFIG_EXTRA_ENV_USBTTY                 "usbtty=cdc_acm\0"
  38
  39 /* I2C driver configuration */
  40 #define CONFIG_HARD_I2C
  41 #define CONFIG_DW_I2C
  42 #if defined(CONFIG_SPEAR600)
  43 #define CONFIG_SYS_I2C_BASE                     0xD0200000
  44 #elif defined(CONFIG_SPEAR300)
  45 #define CONFIG_SYS_I2C_BASE                     0xD0180000
  46 #elif defined(CONFIG_SPEAR310)
  47 #define CONFIG_SYS_I2C_BASE                     0xD0180000
  48 #elif defined(CONFIG_SPEAR320)
  49 #define CONFIG_SYS_I2C_BASE                     0xD0180000
  50 #endif
  51 #define CONFIG_SYS_I2C_SPEED                    400000
  52 #define CONFIG_SYS_I2C_SLAVE                    0x02
  53
  54 #define CONFIG_I2C_CHIPADDRESS                  0x50
  55
  56 /* Timer, HZ specific defines */
  57
  58 /* Flash configuration */
  59 #if defined(CONFIG_FLASH_PNOR)
  60 #define CONFIG_SPEAR_EMI
  61 #else
  62 #define CONFIG_ST_SMI
  63 #endif
  64
  65 #if defined(CONFIG_ST_SMI)
  66
  67 #define CONFIG_SYS_MAX_FLASH_BANKS              2
  68 #define CONFIG_SYS_FLASH_BASE                   0xF8000000
  69 #define CONFIG_SYS_CS1_FLASH_BASE               0xF9000000
  70 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
  71 #define CONFIG_SYS_FLASH_ADDR_BASE              {CONFIG_SYS_FLASH_BASE, \
  72                                                 CONFIG_SYS_CS1_FLASH_BASE}
  73 #define CONFIG_SYS_MAX_FLASH_SECT               128
  74
  75 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
  76 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
  77
  78 #endif
  79
  80 /*
  81  * Serial Configuration (PL011)
  82  * CONFIG_PL01x_PORTS is defined in specific files
  83  */
  84 #define CONFIG_PL011_SERIAL
  85 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
  86 #define CONFIG_CONS_INDEX                       0
  87 #define CONFIG_BAUDRATE                         115200
  88 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
  89                                                 57600, 115200 }
  90
  91 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  92
  93 /* NAND FLASH Configuration */
  94 #define CONFIG_SYS_NAND_SELF_INIT
  95 #define CONFIG_MTD_DEVICE
  96 #define CONFIG_MTD_PARTITIONS
  97 #define CONFIG_NAND_FSMC
  98 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  99 #define CONFIG_SYS_NAND_ONFI_DETECTION
 100 #define CONFIG_SYS_NAND_QUIET_TEST
 101
 102 /*
 103  * Command support defines
 104  */
 105 #define CONFIG_CMD_I2C
 106 #define CONFIG_CMD_NAND
 107 #define CONFIG_CMD_ENV
 108 #define CONFIG_CMD_MEMORY
 109 #define CONFIG_CMD_RUN
 110 #define CONFIG_CMD_SAVES
 111 #define CONFIG_CMD_NET
 112 #define CONFIG_CMD_MII
 113 #define CONFIG_CMD_PING
 114 #define CONFIG_CMD_DHCP
 115
 116 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 117 #include <config_cmd_default.h>
 118
 119 /*
 120  * Default Environment Varible definitions
 121  */
 122 #if defined(CONFIG_SPEAR_USBTTY)
 123 #define CONFIG_BOOTDELAY                        -1
 124 #else
 125 #define CONFIG_BOOTDELAY                        1
 126 #endif
 127
 128 #define CONFIG_ENV_OVERWRITE
 129
 130 /*
 131  * U-Boot Environment placing definitions.
 132  */
 133 #if defined(CONFIG_ENV_IS_IN_FLASH)
 134 #ifdef CONFIG_ST_SMI
 135 /*
 136  * Environment is in serial NOR flash
 137  */
 138 #define CONFIG_SYS_MONITOR_LEN                  0x00040000
 139 #define CONFIG_ENV_SECT_SIZE                    0x00010000
 140 #define CONFIG_FSMTDBLK                         "/dev/mtdblock3 "
 141
 142 #define CONFIG_BOOTCOMMAND                      "bootm 0xf8050000"
 143
 144 #elif defined(CONFIG_SPEAR_EMI)
 145 /*
 146  * Environment is in parallel NOR flash
 147  */
 148 #define CONFIG_SYS_MONITOR_LEN                  0x00060000
 149 #define CONFIG_ENV_SECT_SIZE                    0x00020000
 150 #define CONFIG_FSMTDBLK                         "/dev/mtdblock3 "
 151
 152 #define CONFIG_BOOTCOMMAND                      "cp.b 0x50080000 0x1600000 " \
 153                                                 "0x4C0000; bootm 0x1600000"
 154 #endif
 155
 156 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_FLASH_BASE + \
 157                                                 CONFIG_SYS_MONITOR_LEN)
 158 #elif defined(CONFIG_ENV_IS_IN_NAND)
 159 /*
 160  * Environment is in NAND
 161  */
 162
 163 #define CONFIG_ENV_OFFSET                       0x60000
 164 #define CONFIG_ENV_RANGE                        0x10000
 165 #define CONFIG_FSMTDBLK                         "/dev/mtdblock7 "
 166
 167 #define CONFIG_BOOTCOMMAND                      "nand read.jffs2 0x1600000 " \
 168                                                 "0x80000 0x4C0000; " \
 169                                                 "bootm 0x1600000"
 170 #endif
 171
 172 #define CONFIG_BOOTARGS                         "console=ttyAMA0,115200 " \
 173                                                 "mem=128M " \
 174                                                 "root="CONFIG_FSMTDBLK \
 175                                                 "rootfstype=jffs2"
 176
 177 #define CONFIG_NFSBOOTCOMMAND                                           \
 178         "bootp; "                                                       \
 179         "setenv bootargs root=/dev/nfs rw "                             \
 180         "nfsroot=$(serverip):$(rootpath) "                              \
 181         "ip=$(ipaddr):$(serverip):$(gatewayip):"                        \
 182                         "$(netmask):$(hostname):$(netdev):off "         \
 183                         "console=ttyAMA0,115200 $(othbootargs);"        \
 184         "bootm; "
 185
 186 #define CONFIG_RAMBOOTCOMMAND                                           \
 187         "setenv bootargs root=/dev/ram rw "                             \
 188                 "console=ttyAMA0,115200 $(othbootargs);"                \
 189         CONFIG_BOOTCOMMAND
 190
 191
 192 #define CONFIG_ENV_SIZE                         0x02000
 193 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_TEXT_BASE
 194
 195 /* Miscellaneous configurable options */
 196 #define CONFIG_ARCH_CPU_INIT
 197 #define CONFIG_BOARD_EARLY_INIT_F
 198 #define CONFIG_DISPLAY_CPUINFO
 199 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
 200 #define CONFIG_CMDLINE_TAG
 201 #define CONFIG_SETUP_MEMORY_TAGS
 202 #define CONFIG_MISC_INIT_R
 203 #define CONFIG_ZERO_BOOTDELAY_CHECK
 204 #define CONFIG_AUTOBOOT_KEYED
 205 #define CONFIG_AUTOBOOT_STOP_STR                " "
 206 #define CONFIG_AUTOBOOT_PROMPT                  \
 207                 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
 208
 209 #define CONFIG_SYS_MEMTEST_START                0x00800000
 210 #define CONFIG_SYS_MEMTEST_END                  0x04000000
 211 #define CONFIG_SYS_MALLOC_LEN                   (1024*1024)
 212 #define CONFIG_IDENT_STRING                     "-SPEAr"
 213 #define CONFIG_SYS_LONGHELP
 214 #define CONFIG_SYS_PROMPT                       "u-boot> "
 215 #define CONFIG_CMDLINE_EDITING
 216 #define CONFIG_SYS_CBSIZE                       256
 217 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
 218                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 219 #define CONFIG_SYS_MAXARGS                      16
 220 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
 221 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
 222 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 223
 224 #define CONFIG_SYS_FLASH_EMPTY_INFO
 225
 226 /* Physical Memory Map */
 227 #define CONFIG_NR_DRAM_BANKS                    1
 228 #define PHYS_SDRAM_1                            0x00000000
 229 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
 230
 231 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
 232 #define CONFIG_SYS_INIT_RAM_ADDR                0xD2800000
 233 #define CONFIG_SYS_INIT_RAM_SIZE                0x2000
 234
 235 #define CONFIG_SYS_INIT_SP_OFFSET               \
 236         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 237
 238 #define CONFIG_SYS_INIT_SP_ADDR                 \
 239         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 240
 241 #endif