2 * (C) Copyright 2009 DENX Software Engineering
\r
3 * Author: John Rigby <jrigby@gmail.com>
\r
5 * This program is free software; you can redistribute it and/or
\r
6 * modify it under the terms of the GNU General Public License as
\r
7 * published by the Free Software Foundation; either version 2 of
\r
8 * the License, or (at your option) any later version.
\r
10 * This program is distributed in the hope that it will be useful,
\r
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
13 * GNU General Public License for more details.
\r
15 * You should have received a copy of the GNU General Public License
\r
16 * along with this program; if not, write to the Free Software
\r
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
\r
23 #define CONFIG_SHARK_PAD_HW_V102
\r
24 //only used in fdl2 .in uart download, the debug infors from serial will break the download process.
\r
25 #define CONFIG_FDL2_PRINT 0
\r
26 #define BOOT_NATIVE_LINUX 1
\r
27 #define BOOT_NATIVE_LINUX_MODEM 1
\r
28 //#define CALIBRATION_FLAG 0x897FFC00
\r
29 //#define CALIBRATION_FLAG_WCDMA 0x93FFEC00
\r
30 #define CONFIG_SILENT_CONSOLE
\r
31 #define CONFIG_GPIOLIB 1
\r
32 //#define NAND_DEBUG
\r
34 #define U_BOOT_SPRD_VER 1
\r
35 /*#define SPRD_EVM_TAG_ON 1*/
\r
36 #ifdef SPRD_EVM_TAG_ON
\r
37 #define SPRD_EVM_ADDR_START 0x00026000
\r
38 #define SPRD_EVM_TAG(_x) (*(((unsigned long *)SPRD_EVM_ADDR_START)+_x) = *(volatile unsigned long *)0x87003004)
\r
40 #define CONFIG_L2_OFF 1
\r
42 #define BOOT_DEBUG 1
\r
44 #define CONFIG_YAFFS2 1
\r
46 #define BOOT_PART "boot"
\r
47 //#define BOOT_PART "kernel"
\r
48 #define RECOVERY_PART "recovery"
\r
50 * SPREADTRUM BIGPHONE board - SoC Configuration
\r
52 #define CONFIG_SP8830
\r
53 #define CONFIG_SC8830
\r
54 #define CONFIG_SP5735C1
\r
55 #define CONFIG_SC8830_LVDS //LiWei
\r
56 #define CONFIG_SP8830WCN
\r
57 #define CONFIG_SUPPORT_W
\r
58 #define WDSP_ADR 0x90020000
\r
59 #define WFIXNV_ADR 0x90240000
\r
60 #define WRUNTIMENV_ADR 0x90280000
\r
61 #define WMODEM_ADR 0x90300000
\r
63 #define CONFIG_SUPPORT_WIFI
\r
64 #define WCNMODEM_ADR 0x94060000
\r
65 #define WCNFIXNV_ADR 0x94000000
\r
66 #define WCNRUNTIMENV_ADR 0x94020000
\r
67 #define CHIP_ENDIAN_LITTLE
\r
68 #define _LITTLE_ENDIAN 1
\r
70 #define CONFIG_RAM512M
\r
72 #define CONFIG_EMMC_BOOT
\r
74 #ifdef CONFIG_EMMC_BOOT
\r
75 #define EMMC_SECTOR_SIZE 512
\r
78 #define CONFIG_FS_EXT4
\r
79 #define CONFIG_EXT4_WRITE
\r
80 #define CONFIG_CMD_EXT4
\r
81 #define CONFIG_CMD_EXT4_WRITE
\r
83 //#define CONFIG_TIGER_MMC
\r
84 #define CONFIG_UEFI_PARTITION
\r
85 #define CONFIG_EFI_PARTITION
\r
86 #define CONFIG_EXT4_SPARSE_DOWNLOAD
\r
87 //#define CONFIG_EMMC_SPL
\r
88 #define CONFIG_SYS_EMMC_U_BOOT_SECTOR_NUM ((CONFIG_SYS_NAND_U_BOOT_SIZE+EMMC_SECTOR_SIZE-1)/EMMC_SECTOR_SIZE)
\r
95 #define CONFIG_CMD_MMC
\r
96 #ifdef CONFIG_CMD_MMC
\r
97 #define CONFIG_CMD_FAT 1
\r
98 #define CONFIG_FAT_WRITE 1
\r
99 #define CONFIG_MMC 1
\r
100 #define CONFIG_GENERIC_MMC 1
\r
101 #define CONFIG_SDHCI 1
\r
102 #define CONFIG_SDHCI_CTRL_NO_HISPD 1 /* disable high speed control */
\r
103 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 0x1000
\r
104 #define CONFIG_MMC_SDMA 1
\r
105 #define CONFIG_MV_SDHCI 1
\r
106 #define CONFIG_DOS_PARTITION 1
\r
107 #define CONFIG_EFI_PARTITION 1
\r
108 #define CONFIG_SYS_MMC_NUM 1
\r
109 #define CONFIG_SYS_MMC_BASE {0x20600000}
\r
110 #define CONFIG_SYS_SD_BASE 0x20300000
\r
113 #define BB_DRAM_TYPE_256MB_32BIT
\r
115 #define CONFIG_SYS_HZ 1000
\r
116 #define CONFIG_SPRD_TIMER_CLK 1000 /*32768*/
\r
118 //#define CONFIG_SYS_HUSH_PARSER
\r
120 #ifdef CONFIG_SYS_HUSH_PARSER
\r
121 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
\r
124 #define FIXNV_SIZE (2*128 * 1024)
\r
125 #define WMODEM_SIZE (0x800000)
\r
126 #define WDSP_SIZE (0x200000)
\r
127 #define WCNMODEM_SIZE (0x800000)
\r
128 #define VMJALUNA_SIZE (0x64000) /* 400K */
\r
129 #define RUNTIMENV_SIZE (3*128 * 1024)
\r
130 #define CONFIG_SPL_LOAD_LEN (0x6000)
\r
133 /*#define CMDLINE_NEED_CONV */
\r
135 #define WATCHDOG_LOAD_VALUE 0x4000
\r
136 #define CONFIG_SYS_STACK_SIZE 0x400
\r
137 //#define CONFIG_SYS_TEXT_BASZE 0x80f00000
\r
139 //#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */
\r
141 /* NAND BOOT is the only boot method */
\r
142 #define CONFIG_NAND_U_BOOT
\r
143 #define DYNAMIC_CRC_TABLE
\r
144 /* Start copying real U-boot from the second page */
\r
145 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
\r
146 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x8A000
\r
147 #define RAM_TYPPE_IS_SDRAM 0
\r
148 //#define FPGA_TRACE_DOWNLOAD //for download image from trace
\r
150 /* Load U-Boot to this address */
\r
151 #define CONFIG_SYS_NAND_U_BOOT_DST 0x8f800000
\r
152 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
\r
153 #define CONFIG_SYS_SDRAM_BASE 0x80000000
\r
154 #define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE + 256*1024*1024)
\r
156 #ifdef CONFIG_NAND_SPL
\r
157 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_END - 0x40000)
\r
160 #define CONFIG_MMU_TABLE_ADDR (0x00020000)
\r
161 #define CONFIG_SYS_INIT_SP_ADDR \
\r
162 (CONFIG_SYS_SDRAM_END - 0x10000 - GENERATED_GBL_DATA_SIZE)
\r
164 #define CONFIG_SKIP_LOWLEVEL_INIT
\r
167 #define CONFIG_HW_WATCHDOG
\r
168 //#define CONFIG_AUTOBOOT //used for FPGA test, auto boot other image
\r
169 //#define CONFIG_DISPLAY_CPUINFO
\r
171 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
\r
172 #define CONFIG_SETUP_MEMORY_TAGS 1
\r
173 #define CONFIG_INITRD_TAG 1
\r
179 #define CONFIG_SYS_MALLOC_LEN (2 << 20) /* 1 MiB */
\r
181 * Board has 2 32MB banks of DRAM but there is a bug when using
\r
182 * both so only the first is configured
\r
184 #define CONFIG_NR_DRAM_BANKS 1
\r
186 #define PHYS_SDRAM_1 0x80000000
\r
187 #define PHYS_SDRAM_1_SIZE 0x10000000
\r
188 #if (CONFIG_NR_DRAM_BANKS == 2)
\r
189 #define PHYS_SDRAM_2 0x90000000
\r
190 #define PHYS_SDRAM_2_SIZE 0x10000000
\r
192 /* 8MB DRAM test */
\r
193 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
\r
194 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000)
\r
195 #define CONFIG_STACKSIZE (256 * 1024) /* regular stack */
\r
200 #define CONFIG_SPRD_UART 1
\r
201 #define CONFIG_SYS_SC8800X_UART1 1
\r
202 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */
\r
203 #define CONFIG_BAUDRATE 115200 /* Default baud rate */
\r
204 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
\r
205 #define CONFIG_SPRD_SPI
\r
206 #define CONFIG_SPRD_I2C
\r
207 #define CONFIG_SC8830_I2C
\r
209 * Flash & Environment
\r
211 /* No NOR flash present */
\r
212 #define CONFIG_SYS_MONITOR_LEN ((CONFIG_SYS_NAND_U_BOOT_OFFS)+(CONFIG_SYS_NAND_U_BOOT_SIZE))
\r
213 #define CONFIG_SYS_NO_FLASH 1
\r
214 #define CONFIG_ENV_IS_NOWHERE
\r
215 #define CONFIG_ENV_SIZE (128 * 1024)
\r
217 #define CONFIG_ENV_IS_IN_NAND
\r
218 #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
\r
219 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
\r
224 #define DDR_CLK 384
\r
226 //---these three macro below,only one can be open
\r
227 //#define DDR_LPDDR1
\r
228 //#define DDR_LPDDR2
\r
231 //#define DDR_AUTO_DETECT
\r
232 //#define DDR_TYPE DRAM_LPDDR2_2CS_8G_X32
\r
233 //#define DDR_TYPE DRAM_LPDDR2_1CS_4G_X32
\r
234 //#define DDR_TYPE DRAM_LPDDR2_1CS_8G_X32
\r
235 //#define DDR_TYPE DRAM_LPDDR2_2CS_16G_X32
\r
236 //#define DDR_TYPE DRAM_DDR3_1CS_2G_X8_4P
\r
237 #define DDR_TYPE DRAM_DDR3_1CS_4G_X16_2P
\r
239 #define DDR3_DLL_ON TRUE
\r
240 //#define DLL_BYPASS
\r
241 #define DDR_APB_CLK 128
\r
242 #define DDR_DFS_SUPPORT
\r
243 #define DDR_DFS_VAL_BASE 0X1c00
\r
245 //#define DDR_SCAN_SUPPORT
\r
246 #define MEM_IO_DS LPDDR2_DS_40R
\r
248 #define PUBL_LPDDR1_DS PUBL_LPDDR1_DS_48OHM
\r
249 #define PUBL_LPDDR2_DS PUBL_LPDDR2_DS_40OHM
\r
250 #define PUBL_DDR3_DS PUBL_DDR3_DS_40OHM
\r
254 #define CONFIG_NAND_SC8830
\r
255 #define CONFIG_SPRD_NAND_REGS_BASE (0x21100000)
\r
256 #define CONFIG_SYS_MAX_NAND_DEVICE 1
\r
257 #define CONFIG_SYS_NAND_BASE (0x21100000)
\r
258 //#define CONFIG_JFFS2_NAND
\r
259 //#define CONFIG_SPRD_NAND_HWECC
\r
260 #define CONFIG_SYS_NAND_HW_ECC
\r
261 #define CONFIG_SYS_NAND_LARGEPAGE
\r
262 //#define CONFIG_SYS_NAND_5_ADDR_CYCLE
\r
264 #define CONFIG_SYS_64BIT_VSPRINTF
\r
266 #define CONFIG_CMD_MTDPARTS
\r
267 #define CONFIG_MTD_PARTITIONS
\r
268 #define CONFIG_MTD_DEVICE
\r
269 #define CONFIG_CMD_UBI
\r
270 #define CONFIG_RBTREE
\r
272 /* U-Boot general configuration */
\r
273 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
\r
274 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
\r
275 /* Print buffer sz */
\r
276 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
\r
277 sizeof(CONFIG_SYS_PROMPT) + 16)
\r
278 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
\r
279 /* Boot Argument Buffer Size */
\r
280 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
\r
281 #define CONFIG_CMDLINE_EDITING
\r
282 #define CONFIG_SYS_LONGHELP
\r
284 /* support OS choose */
\r
285 #undef CONFIG_BOOTM_NETBSD
\r
286 #undef CONFIG_BOOTM_RTEMS
\r
288 /* U-Boot commands */
\r
290 #include <config_cmd_default.h>
\r
291 #define CONFIG_CMD_NAND
\r
292 #undef CONFIG_CMD_FPGA
\r
293 #undef CONFIG_CMD_LOADS
\r
294 #undef CONFIG_CMD_NET
\r
295 #undef CONFIG_CMD_NFS
\r
296 #undef CONFIG_CMD_SETGETDCR
\r
298 #define CONFIG_ENV_OVERWRITE
\r
300 #ifdef SPRD_EVM_TAG_ON
\r
301 #define CONFIG_BOOTDELAY 0
\r
303 #define CONFIG_BOOTDELAY 0
\r
304 #define CONFIG_ZERO_BOOTDELAY_CHECK
\r
307 #define CONFIG_LOADADDR (CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN - 4*1024*1024) /* loadaddr env var */
\r
308 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
\r
310 #define xstr(s) str(s)
\r
313 #define MTDIDS_DEFAULT "nand0=sprd-nand"
\r
314 #define MTDPARTS_DEFAULT "mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),250m(system),180m(userdata),20m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic)"
\r
315 #define CONFIG_BOOTARGS "mem=512M loglevel=1 console=ttyS1,115200n8 init=/init " MTDPARTS_DEFAULT
\r
317 #define COPY_LINUX_KERNEL_SIZE (0x600000)
\r
318 #define LINUX_INITRD_NAME "modem"
\r
320 #define CONFIG_BOOTCOMMAND "cboot normal"
\r
321 #define CONFIG_EXTRA_ENV_SETTINGS ""
\r
323 #ifdef CONFIG_CMD_NET
\r
324 #define CONFIG_IPADDR 192.168.10.2
\r
325 #define CONFIG_SERVERIP 192.168.10.5
\r
326 #define CONFIG_NETMASK 255.255.255.0
\r
327 #define CONFIG_USBNET_DEVADDR 26:03:ee:00:87:9f
\r
328 #define CONFIG_USBNET_HOSTADDR 9a:04:c7:d6:30:d0
\r
331 #define CONFIG_NET_MULTI
\r
332 #define CONFIG_CMD_DNS
\r
333 #define CONFIG_CMD_NFS
\r
334 #define CONFIG_CMD_RARP
\r
335 #define CONFIG_CMD_PING
\r
336 /*#define CONFIG_CMD_SNTP */
\r
339 #define CONFIG_USB_CORE_IP_293A
\r
340 #define CONFIG_USB_GADGET_SC8800G
\r
341 #define CONFIG_USB_DWC
\r
342 #define CONFIG_USB_GADGET_DUALSPEED
\r
343 //#define CONFIG_USB_ETHER
\r
344 #define CONFIG_CMD_FASTBOOT
\r
345 #define SCRATCH_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100000)
\r
346 #define FB_DOWNLOAD_BUF_SIZE (250*1024*1024)
\r
348 #define CONFIG_MODEM_CALIBERATE
\r
352 #define CONFIG_SPLASH_SCREEN
\r
353 #define LCD_BPP LCD_COLOR16
\r
354 //#define CONFIG_LCD_HVGA 1
\r
355 //#define CONFIG_LCD_QVGA 1
\r
356 //#define CONFIG_LCD_QHD 1//LiWei delete
\r
357 //#define CONFIG_LCD_720P 1
\r
358 #define CONFIG_LCD_HD 1 //LiWei add
\r
359 //#define CONFIG_LCD_INFO
\r
360 //#define LCD_TEST_PATTERN
\r
361 //#define CONFIG_LCD_LOGO
\r
362 //#define CONFIG_FB_LCD_S6D0139
\r
363 #define CONFIG_FB_LCD_SSD2075_MIPI
\r
364 #define CONFIG_FB_LCD_NT35516_MIPI
\r
365 #define CONFIG_FB_LCD_NT51017_LVDS //LiWei add
\r
366 #define CONFIG_SYS_WHITE_ON_BLACK
\r
367 #ifdef LCD_TEST_PATTERN
\r
368 #define CONSOLE_COLOR_RED 0xf800
\r
369 #define CONSOLE_COLOR_GREEN 0x07e0
\r
370 #define CONSOLE_COLOR_YELLOW 0x07e0
\r
371 #define CONSOLE_COLOR_BLUE 0x001f
\r
372 #define CONSOLE_COLOR_MAGENTA 0x001f
\r
373 #define CONSOLE_COLOR_CYAN 0x001f
\r
375 #endif // CONFIG_LCD
\r
377 #define CONFIG_SPRD_SYSDUMP
\r
378 #include <asm/sizes.h>
\r
379 #define SPRD_SYSDUMP_MAGIC ((PHYS_OFFSET_ADDR & (~(SZ_512M - 1))) + SZ_512M - SZ_1M)
\r
383 #define CALIBRATE_ENUM_MS 15000
\r
384 #define CALIBRATE_IO_MS 10000
\r
386 //#define LOW_BAT_ADC_LEVEL 782 /*phone battery adc value low than this value will not boot up*/
\r
387 #define LOW_BAT_VOL 3500 /*phone battery voltage low than this value will not boot up*/
\r
388 #define LOW_BAT_VOL_CHG 3200 //3.3V charger connect
\r
390 #define PWR_KEY_DETECT_CNT 12 /*this should match the count of boot_pwr_check() function */
\r
391 #define ALARM_LEAD_SET_MS 0 /* time set for alarm boot in advancd */
\r
393 #define PHYS_OFFSET_ADDR 0x80000000
\r
394 #define TD_CP_OFFSET_ADDR 0x8000000 /*128*/
\r
395 #define TD_CP_SDRAM_SIZE 0x1800000 /*24M*/
\r
396 #define WCDMA_CP_OFFSET_ADDR 0x10000000 /*256M*/
\r
397 #define WCDMA_CP_SDRAM_SIZE 0x2100000 /*33M*/
\r
398 #define WCN_CP_OFFSET_ADDR 0x14000000 /*320M*/
\r
399 #define WCN_CP_SDRAM_SIZE 0x281000//0x400000 /*4M*/
\r
401 #define SIPC_APCP_RESET_ADDR_SIZE 0xC00 /*3K*/
\r
402 #define SIPC_APCP_RESET_SIZE 0x1000 /*4K*/
\r
403 #define SIPC_TD_APCP_START_ADDR (PHYS_OFFSET_ADDR + TD_CP_OFFSET_ADDR + TD_CP_SDRAM_SIZE - SIPC_APCP_RESET_SIZE) /*0x897FF000*/
\r
404 #define SIPC_WCDMA_APCP_START_ADDR (PHYS_OFFSET_ADDR + WCDMA_CP_OFFSET_ADDR + WCDMA_CP_SDRAM_SIZE - SIPC_APCP_RESET_SIZE) /*0x93FFF000*/
\r
405 #define SIPC_WCN_APCP_START_ADDR (PHYS_OFFSET_ADDR + WCN_CP_OFFSET_ADDR + WCN_CP_SDRAM_SIZE - SIPC_APCP_RESET_SIZE) /*0x94EFF000*/
\r
407 #define CALIBRATION_FLAG_WCDMA (PHYS_OFFSET_ADDR + WCDMA_CP_OFFSET_ADDR + WCDMA_CP_SDRAM_SIZE - 0x400) /*the last 1K of modem memory area*/
\r
408 #define CALIBRATION_FLAG CALIBRATION_FLAG_WCDMA
\r
410 //#define CALIBRATION_FLAG 0x89700000
\r
412 #define CONFIG_CMD_SOUND 1
\r
413 #define CONFIG_CMD_FOR_HTC 1
\r
414 #define CONFIG_SOUND_CODEC_SPRD_V3 1
\r
415 #define CONFIG_SOUND_DAI_VBC_R2P0 1
\r
416 /* #define CONFIG_SPRD_AUDIO_DEBUG */
\r
418 #define CONFIG_RAMDUMP_NO_SPLIT 1 /* Don't split sysdump file */
\r
419 #define USB_PHY_TUNE_VALUE 0x44073e33
\r
422 /* For pad hardware v0.2 */
\r
423 #ifdef CONFIG_SHARK_PAD_HW_V102
\r
424 #define EIC_USB_DETECT EIC_PBINT2
\r
425 #define USB_CHG_EN 83
\r
427 #endif /* __CONFIG_H */
\r