2 * Copyright (C) 2015 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
6 #ifndef __CONFIG_SOCFPGA_SR1500_H__
7 #define __CONFIG_SOCFPGA_SR1500_H__
9 #include <asm/arch/base_addr_ac5.h>
11 #define CONFIG_HW_WATCHDOG
13 /* Memory configurations */
14 #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */
17 #define CONFIG_LOADADDR 0x01000000
18 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
20 /* Ethernet on SoC (EMAC) */
21 #define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
22 /* The PHY is autodetected, so no MII PHY address is needed here */
23 #define CONFIG_PHY_MARVELL
24 #define PHY_ANEG_TIMEOUT 8000
27 #define CONFIG_ENV_IS_IN_SPI_FLASH
29 /* Enable SPI NOR flash reset, needed for SPI booting */
30 #define CONFIG_SPI_N25Q256A_RESET
35 #define CONFIG_BOOTCOUNT_LIMIT
36 /* last 2 lwords in OCRAM */
37 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8
38 #define CONFIG_SYS_BOOTCOUNT_BE
40 /* Environment setting for SPI flash */
41 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
42 #define CONFIG_ENV_SECT_SIZE (64 * 1024)
43 #define CONFIG_ENV_SIZE (16 * 1024)
44 #define CONFIG_ENV_OFFSET 0x000e0000
45 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
46 #define CONFIG_ENV_SPI_BUS 0
47 #define CONFIG_ENV_SPI_CS 0
48 #define CONFIG_ENV_SPI_MODE SPI_MODE_3
49 #define CONFIG_ENV_SPI_MAX_HZ 100000000 /* Use max of 100MHz */
50 #define CONFIG_SF_DEFAULT_SPEED 100000000
53 * The QSPI NOR flash layout on SR1500:
55 * 0000.0000 - 0003.ffff: SPL (4 times)
56 * 0004.0000 - 000d.ffff: U-Boot
57 * 000e.0000 - 000e.ffff: env1
58 * 000f.0000 - 000f.ffff: env2
61 /* The rest of the configuration is shared */
62 #include <configs/socfpga_common.h>
64 #endif /* __CONFIG_SOCFPGA_SR1500_H__ */