include/configs/socfpga_common.h

   1 /*
   2  * Copyright (C) 2012 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_COMMON_H__
   7 #define __CONFIG_SOCFPGA_COMMON_H__
   8
   9 /* Virtual target or real hardware */
  10 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET
  11
  12 /*
  13  * High level configuration
  14  */
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16 #define CONFIG_CLOCKS
  17
  18 #define CONFIG_SYS_BOOTMAPSZ            (64 * 1024 * 1024)
  19
  20 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  21
  22 /* add target to build it automatically upon "make" */
  23 #define CONFIG_BUILD_TARGET             "u-boot-with-spl.sfp"
  24
  25 /*
  26  * Memory configurations
  27  */
  28 #define CONFIG_NR_DRAM_BANKS            1
  29 #define PHYS_SDRAM_1                    0x0
  30 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  31 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  32 #define CONFIG_SYS_MEMTEST_END          PHYS_SDRAM_1_SIZE
  33 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
  34 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFFF0000
  35 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  36 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
  37 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFE00000
  38 #define CONFIG_SYS_INIT_RAM_SIZE        0x40000 /* 256KB */
  39 #endif
  40 #define CONFIG_SYS_INIT_SP_OFFSET               \
  41         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  42 #define CONFIG_SYS_INIT_SP_ADDR                 \
  43         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  44
  45 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  46 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
  47 #define CONFIG_SYS_TEXT_BASE            0x08000040
  48 #else
  49 #define CONFIG_SYS_TEXT_BASE            0x01000040
  50 #endif
  51
  52 /*
  53  * U-Boot general configurations
  54  */
  55 #define CONFIG_SYS_LONGHELP
  56 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  57                                                 /* Print buffer size */
  58 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  59 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  60                                                 /* Boot argument buffer size */
  61 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  62 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  63
  64 #ifndef CONFIG_SYS_HOSTNAME
  65 #define CONFIG_SYS_HOSTNAME     CONFIG_SYS_BOARD
  66 #endif
  67
  68 #define CONFIG_CMD_PXE
  69 #define CONFIG_MENU
  70
  71 /*
  72  * Cache
  73  */
  74 #define CONFIG_SYS_L2_PL310
  75 #define CONFIG_SYS_PL310_BASE           SOCFPGA_MPUL2_ADDRESS
  76
  77 /*
  78  * EPCS/EPCQx1 Serial Flash Controller
  79  */
  80 #ifdef CONFIG_ALTERA_SPI
  81 #define CONFIG_SF_DEFAULT_SPEED         30000000
  82 /*
  83  * The base address is configurable in QSys, each board must specify the
  84  * base address based on it's particular FPGA configuration. Please note
  85  * that the address here is incremented by  0x400  from the Base address
  86  * selected in QSys, since the SPI registers are at offset +0x400.
  87  * #define CONFIG_SYS_SPI_BASE          0xff240400
  88  */
  89 #endif
  90
  91 /*
  92  * Ethernet on SoC (EMAC)
  93  */
  94 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
  95 #define CONFIG_DW_ALTDESCRIPTOR
  96 #define CONFIG_MII
  97 #endif
  98
  99 /*
 100  * FPGA Driver
 101  */
 102 #ifdef CONFIG_CMD_FPGA
 103 #define CONFIG_FPGA_COUNT               1
 104 #endif
 105
 106 /*
 107  * L4 OSC1 Timer 0
 108  */
 109 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
 110 #define CONFIG_SYS_TIMERBASE            SOCFPGA_OSC1TIMER0_ADDRESS
 111 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 112 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
 113 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 114 #define CONFIG_SYS_TIMER_RATE           2400000
 115 #else
 116 #define CONFIG_SYS_TIMER_RATE           25000000
 117 #endif
 118
 119 /*
 120  * L4 Watchdog
 121  */
 122 #ifdef CONFIG_HW_WATCHDOG
 123 #define CONFIG_DESIGNWARE_WATCHDOG
 124 #define CONFIG_DW_WDT_BASE              SOCFPGA_L4WD0_ADDRESS
 125 #define CONFIG_DW_WDT_CLOCK_KHZ         25000
 126 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   30000
 127 #endif
 128
 129 /*
 130  * MMC Driver
 131  */
 132 #ifdef CONFIG_CMD_MMC
 133 #define CONFIG_BOUNCE_BUFFER
 134 /* FIXME */
 135 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 136 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    256     /* FIXME -- SPL only? */
 137 #endif
 138
 139 /*
 140  * NAND Support
 141  */
 142 #ifdef CONFIG_NAND_DENALI
 143 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 144 #define CONFIG_SYS_NAND_ONFI_DETECTION
 145 #define CONFIG_NAND_DENALI_ECC_SIZE     512
 146 #define CONFIG_SYS_NAND_REGS_BASE       SOCFPGA_NANDREGS_ADDRESS
 147 #define CONFIG_SYS_NAND_DATA_BASE       SOCFPGA_NANDDATA_ADDRESS
 148 #endif
 149
 150 /*
 151  * I2C support
 152  */
 153 #define CONFIG_SYS_I2C
 154 #define CONFIG_SYS_I2C_BASE             SOCFPGA_I2C0_ADDRESS
 155 #define CONFIG_SYS_I2C_BASE1            SOCFPGA_I2C1_ADDRESS
 156 #define CONFIG_SYS_I2C_BASE2            SOCFPGA_I2C2_ADDRESS
 157 #define CONFIG_SYS_I2C_BASE3            SOCFPGA_I2C3_ADDRESS
 158 /* Using standard mode which the speed up to 100Kb/s */
 159 #define CONFIG_SYS_I2C_SPEED            100000
 160 #define CONFIG_SYS_I2C_SPEED1           100000
 161 #define CONFIG_SYS_I2C_SPEED2           100000
 162 #define CONFIG_SYS_I2C_SPEED3           100000
 163 /* Address of device when used as slave */
 164 #define CONFIG_SYS_I2C_SLAVE            0x02
 165 #define CONFIG_SYS_I2C_SLAVE1           0x02
 166 #define CONFIG_SYS_I2C_SLAVE2           0x02
 167 #define CONFIG_SYS_I2C_SLAVE3           0x02
 168 #ifndef __ASSEMBLY__
 169 /* Clock supplied to I2C controller in unit of MHz */
 170 unsigned int cm_get_l4_sp_clk_hz(void);
 171 #define IC_CLK                          (cm_get_l4_sp_clk_hz() / 1000000)
 172 #endif
 173
 174 /*
 175  * QSPI support
 176  */
 177 /* Enable multiple SPI NOR flash manufacturers */
 178 #ifndef CONFIG_SPL_BUILD
 179 #define CONFIG_SPI_FLASH_MTD
 180 #define CONFIG_MTD_DEVICE
 181 #define CONFIG_MTD_PARTITIONS
 182 #define MTDIDS_DEFAULT                  "nor0=ff705000.spi.0"
 183 #endif
 184 /* QSPI reference clock */
 185 #ifndef __ASSEMBLY__
 186 unsigned int cm_get_qspi_controller_clk_hz(void);
 187 #define CONFIG_CQSPI_REF_CLK            cm_get_qspi_controller_clk_hz()
 188 #endif
 189 #define CONFIG_CQSPI_DECODER            0
 190 #define CONFIG_BOUNCE_BUFFER
 191
 192 /*
 193  * Designware SPI support
 194  */
 195
 196 /*
 197  * Serial Driver
 198  */
 199 #define CONFIG_SYS_NS16550_SERIAL
 200 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 201 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 202 #define CONFIG_SYS_NS16550_CLK          1000000
 203 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 204 #define CONFIG_SYS_NS16550_COM1         SOCFPGA_UART0_ADDRESS
 205 #define CONFIG_SYS_NS16550_CLK          100000000
 206 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 207 #define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
 208 #define CONFIG_SYS_NS16550_CLK          50000000
 209 #endif
 210 #define CONFIG_CONS_INDEX               1
 211
 212 /*
 213  * USB
 214  */
 215
 216 /*
 217  * USB Gadget (DFU, UMS)
 218  */
 219 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 220 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 221
 222 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (16 * 1024 * 1024)
 223 #define DFU_DEFAULT_POLL_TIMEOUT        300
 224
 225 /* USB IDs */
 226 #define CONFIG_G_DNL_UMS_VENDOR_NUM     0x0525
 227 #define CONFIG_G_DNL_UMS_PRODUCT_NUM    0xA4A5
 228 #endif
 229
 230 /*
 231  * U-Boot environment
 232  */
 233 #if !defined(CONFIG_ENV_SIZE)
 234 #define CONFIG_ENV_SIZE                 (8 * 1024)
 235 #endif
 236
 237 /* Environment for SDMMC boot */
 238 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
 239 #define CONFIG_SYS_MMC_ENV_DEV          0 /* device 0 */
 240 #define CONFIG_ENV_OFFSET               (34 * 512) /* just after the GPT */
 241 #endif
 242
 243 /* Environment for QSPI boot */
 244 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
 245 #define CONFIG_ENV_OFFSET               0x00100000
 246 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 247 #endif
 248
 249 /*
 250  * mtd partitioning for serial NOR flash
 251  *
 252  * device nor0 <ff705000.spi.0>, # parts = 6
 253  * #: name                size            offset          mask_flags
 254  * 0: u-boot              0x00100000      0x00000000      0
 255  * 1: env1                0x00040000      0x00100000      0
 256  * 2: env2                0x00040000      0x00140000      0
 257  * 3: UBI                 0x03e80000      0x00180000      0
 258  * 4: boot                0x00e80000      0x00180000      0
 259  * 5: rootfs              0x01000000      0x01000000      0
 260  *
 261  */
 262 #if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
 263 #define MTDPARTS_DEFAULT        "mtdparts=ff705000.spi.0:"\
 264                                 "1m(u-boot),"           \
 265                                 "256k(env1),"           \
 266                                 "256k(env2),"           \
 267                                 "14848k(boot),"         \
 268                                 "16m(rootfs),"          \
 269                                 "-@1536k(UBI)\0"
 270 #endif
 271
 272 /*
 273  * SPL
 274  *
 275  * SRAM Memory layout:
 276  *
 277  * 0xFFFF_0000 ...... Start of SRAM
 278  * 0xFFFF_xxxx ...... Top of stack (grows down)
 279  * 0xFFFF_yyyy ...... Malloc area
 280  * 0xFFFF_zzzz ...... Global Data
 281  * 0xFFFF_FF00 ...... End of SRAM
 282  */
 283 #define CONFIG_SPL_FRAMEWORK
 284 #define CONFIG_SPL_TEXT_BASE            CONFIG_SYS_INIT_RAM_ADDR
 285 #define CONFIG_SPL_MAX_SIZE             CONFIG_SYS_INIT_RAM_SIZE
 286
 287 /* SPL SDMMC boot support */
 288 #ifdef CONFIG_SPL_MMC_SUPPORT
 289 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 290 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot-dtb.img"
 291 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 292 #endif
 293 #else
 294 #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 295 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION      1
 296 #endif
 297 #endif
 298
 299 /* SPL QSPI boot support */
 300 #ifdef CONFIG_SPL_SPI_SUPPORT
 301 #define CONFIG_SPL_SPI_LOAD
 302 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x40000
 303 #endif
 304
 305 /* SPL NAND boot support */
 306 #ifdef CONFIG_SPL_NAND_SUPPORT
 307 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 308 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 309 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 310 #endif
 311
 312 /*
 313  * Stack setup
 314  */
 315 #define CONFIG_SPL_STACK                CONFIG_SYS_INIT_SP_ADDR
 316
 317 /* Extra Environment */
 318 #ifndef CONFIG_SPL_BUILD
 319 #include <config_distro_defaults.h>
 320
 321 #ifdef CONFIG_CMD_PXE
 322 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 323 #else
 324 #define BOOT_TARGET_DEVICES_PXE(func)
 325 #endif
 326
 327 #ifdef CONFIG_CMD_MMC
 328 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 329 #else
 330 #define BOOT_TARGET_DEVICES_MMC(func)
 331 #endif
 332
 333 #define BOOT_TARGET_DEVICES(func) \
 334         BOOT_TARGET_DEVICES_MMC(func) \
 335         BOOT_TARGET_DEVICES_PXE(func) \
 336         func(DHCP, dhcp, na)
 337
 338 #include <config_distro_bootcmd.h>
 339
 340 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 341 #define CONFIG_EXTRA_ENV_SETTINGS \
 342         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 343         "bootm_size=0xa000000\0" \
 344         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
 345         "fdt_addr_r=0x02000000\0" \
 346         "scriptaddr=0x02100000\0" \
 347         "pxefile_addr_r=0x02200000\0" \
 348         "ramdisk_addr_r=0x02300000\0" \
 349         BOOTENV
 350
 351 #endif
 352 #endif
 353
 354 #endif  /* __CONFIG_SOCFPGA_COMMON_H__ */