include/configs/snowball.h

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2009
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * #define DEBUG 1
  12  */
  13
  14 #define CONFIG_SKIP_LOWLEVEL_INIT
  15 #define CONFIG_SNOWBALL
  16 #define CONFIG_SYS_ICACHE_OFF
  17 #define CONFIG_SYS_DCACHE_OFF
  18 #define CONFIG_ARCH_CPU_INIT
  19 #define CONFIG_BOARD_LATE_INIT
  20
  21 /*
  22  * High Level Configuration Options
  23  * (easy to change)
  24  */
  25 #define CONFIG_U8500
  26
  27 #define CONFIG_SYS_MEMTEST_START        0x00000000
  28 #define CONFIG_SYS_MEMTEST_END  0x1FFFFFFF
  29
  30 /*-----------------------------------------------------------------------
  31  * Size of environment and malloc() pool
  32  */
  33 /*
  34  * If you use U-Boot as crash kernel, make sure that it does not overwrite
  35  * information saved by kexec during panic. Kexec expects the start
  36  * address of the executable 32K above "crashkernel" address.
  37  */
  38 /*
  39  * Size of malloc() pool
  40  */
  41 #define CONFIG_ENV_SIZE         (8*1024)
  42 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 256*1024)
  43
  44 #define CONFIG_ENV_IS_IN_MMC
  45 #define CONFIG_CMD_ENV
  46 #define CONFIG_CMD_SAVEENV
  47 #define CONFIG_ENV_OFFSET               0x0118000
  48 #define CONFIG_SYS_MMC_ENV_DEV          0              /* SLOT2: eMMC */
  49
  50 /*
  51  * PL011 Configuration
  52  */
  53 #define CONFIG_PL011_SERIAL
  54 #define CONFIG_PL011_SERIAL_RLCR
  55 #define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
  56
  57 /*
  58  * U8500 UART registers base for 3 serial devices
  59  */
  60 #define CFG_UART0_BASE          0x80120000
  61 #define CFG_UART1_BASE          0x80121000
  62 #define CFG_UART2_BASE          0x80007000
  63 #define CFG_SERIAL0             CFG_UART0_BASE
  64 #define CFG_SERIAL1             CFG_UART1_BASE
  65 #define CFG_SERIAL2             CFG_UART2_BASE
  66 #define CONFIG_PL011_CLOCK      38400000
  67 #define CONFIG_PL01x_PORTS      { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
  68                                   (void *)CFG_SERIAL2 }
  69 #define CONFIG_CONS_INDEX       2
  70 #define CONFIG_BAUDRATE         115200
  71
  72 /*
  73  * Devices and file systems
  74  */
  75 #define CONFIG_MMC
  76 #define CONFIG_GENERIC_MMC
  77 #define CONFIG_DOS_PARTITION
  78
  79 /*
  80  * Commands
  81  */
  82 #define CONFIG_CMD_MEMORY
  83 #define CONFIG_CMD_BOOTD
  84 #define CONFIG_CMD_BDI
  85 #define CONFIG_CMD_IMI
  86 #define CONFIG_CMD_MISC
  87 #define CONFIG_CMD_RUN
  88 #define CONFIG_CMD_ECHO
  89 #define CONFIG_CMD_CONSOLE
  90 #define CONFIG_CMD_LOADS
  91 #define CONFIG_CMD_LOADB
  92 #define CONFIG_CMD_MMC
  93 #define CONFIG_CMD_FAT
  94 #define CONFIG_CMD_EXT2
  95 #define CONFIG_CMD_SOURCE
  96
  97 #ifndef CONFIG_BOOTDELAY
  98 #define CONFIG_BOOTDELAY        1
  99 #endif
 100 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 101
 102 #undef CONFIG_BOOTARGS
 103 #define CONFIG_BOOTCOMMAND \
 104 "mmc dev 1; "                                                           \
 105         "if run loadbootscript; "                                       \
 106                 "then run bootscript; "                                 \
 107         "else "                                                         \
 108                 "if run mmcload; "                                      \
 109                         "then run mmcboot; "                            \
 110                 "else "                                                 \
 111                         "mmc dev 0; "                                   \
 112                         "if run emmcloadbootscript; "                   \
 113                                 "then run bootscript; "                 \
 114                         "else "                                         \
 115                                 "if run emmcload; "                     \
 116                                         "then run emmcboot; "           \
 117                                 "else "                                 \
 118                                         "echo No media to boot from; "  \
 119                                 "fi; "                                  \
 120                         "fi; "                                          \
 121                 "fi; "                                                  \
 122         "fi; "
 123
 124 #define CONFIG_EXTRA_ENV_SETTINGS \
 125         "verify=n\0"                                                    \
 126         "loadaddr=0x00100000\0"                                         \
 127         "console=ttyAMA2,115200n8\0"                                    \
 128         "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0"         \
 129         "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0"     \
 130         "bootscript=echo Running bootscript "                           \
 131                 "from mmc ...; source ${loadaddr}\0"                    \
 132         "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M "          \
 133                 "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0"   \
 134         "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M "        \
 135                 "mem=64M@160M mem_mali=32M@224M "                       \
 136                 "pmem_hwb=128M@256M mem=128M@384M\0"                    \
 137         "memargs1024=mem=128M@0 mali.mali_mem=32M@128M "                \
 138                 "hwmem=168M@M160M mem=48M@328M "                        \
 139                 "mem_issw=1M@383M mem=640M@384M\0"                      \
 140         "memargs=setenv bootargs ${bootargs} ${memargs1024}\0"          \
 141         "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0"                 \
 142         "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0"                  \
 143         "commonargs=setenv bootargs console=${console} "                \
 144         "vmalloc=300M\0"                                                \
 145         "emmcargs=setenv bootargs ${bootargs} "                         \
 146                 "root=/dev/mmcblk0p3 "                                  \
 147                 "rootwait\0"                                            \
 148         "addcons=setenv bootargs ${bootargs} "                          \
 149                 "console=${console}\0"                                  \
 150         "emmcboot=echo Booting from eMMC ...; "                         \
 151                 "run commonargs emmcargs memargs; "                     \
 152                 "bootm ${loadaddr}\0"                                   \
 153         "mmcargs=setenv bootargs ${bootargs} "                          \
 154                 "root=/dev/mmcblk1p2 "                                  \
 155                 "rootwait earlyprintk\0"                                \
 156         "mmcboot=echo Booting from external MMC ...; "                  \
 157                 "run commonargs mmcargs memargs; "                      \
 158                 "bootm ${loadaddr}\0"                                   \
 159         "fdt_high=0x2BC00000\0"                                         \
 160         "stdout=serial,usbtty\0"                                        \
 161         "stdin=serial,usbtty\0"                                         \
 162         "stderr=serial,usbtty\0"
 163
 164 /*-----------------------------------------------------------------------
 165  * Miscellaneous configurable options
 166  */
 167
 168 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 169 #define CONFIG_SYS_PROMPT       "U8500 $ "      /* Monitor Command Prompt   */
 170 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size  */
 171
 172 /* Print Buffer Size */
 173 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 174                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 175 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
 176 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 177
 178 #undef  CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
 179 #define CONFIG_SYS_LOAD_ADDR            0x00100000 /* default load address */
 180 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1
 181
 182 #define CONFIG_SYS_HUSH_PARSER          1
 183 #define CONFIG_CMDLINE_EDITING
 184
 185 #define CONFIG_SETUP_MEMORY_TAGS        2
 186 #define CONFIG_INITRD_TAG               1
 187 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs  */
 188
 189 /*
 190  * Physical Memory Map
 191  */
 192 #define CONFIG_NR_DRAM_BANKS            1
 193 #define PHYS_SDRAM_1                    0x00000000      /* DDR-SDRAM Bank #1 */
 194
 195 /*
 196  * additions for new relocation code
 197  */
 198 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 199 #define CONFIG_SYS_MAX_RAM_SIZE 0x40000000
 200 #define CONFIG_SYS_INIT_RAM_SIZE        0x100000
 201 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_SDRAM_BASE + \
 202                                          CONFIG_SYS_INIT_RAM_SIZE - \
 203                                          GENERATED_GBL_DATA_SIZE)
 204 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_GBL_DATA_OFFSET
 205
 206 /* landing address before relocation */
 207 #ifndef CONFIG_SYS_TEXT_BASE
 208 #define CONFIG_SYS_TEXT_BASE            0x0
 209 #endif
 210
 211 /*
 212  * MMC related configs
 213  */
 214 #define CONFIG_ARM_PL180_MMCI
 215 #define MMC_BLOCK_SIZE                  512
 216 #define CFG_EMMC_BASE                   0x80114000
 217 #define CFG_MMC_BASE                    0x80126000
 218
 219 /*
 220  * FLASH and environment organization
 221  */
 222 #define CONFIG_SYS_NO_FLASH
 223
 224 /*
 225  * base register values for U8500
 226  */
 227 #define CFG_PRCMU_BASE          0x80157000      /* Power, reset and clock */
 228
 229
 230 /*
 231  * U8500 GPIO register base for 9 banks
 232  */
 233 #define CONFIG_DB8500_GPIO
 234 #define CFG_GPIO_0_BASE                 0x8012E000
 235 #define CFG_GPIO_1_BASE                 0x8012E080
 236 #define CFG_GPIO_2_BASE                 0x8000E000
 237 #define CFG_GPIO_3_BASE                 0x8000E080
 238 #define CFG_GPIO_4_BASE                 0x8000E100
 239 #define CFG_GPIO_5_BASE                 0x8000E180
 240 #define CFG_GPIO_6_BASE                 0x8011E000
 241 #define CFG_GPIO_7_BASE                 0x8011E080
 242 #define CFG_GPIO_8_BASE                 0xA03FE000
 243
 244 #define CFG_FSMC_BASE           0x80000000      /* FSMC Controller */
 245
 246 #endif  /* __CONFIG_H */