2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_SYS_CACHELINE_SIZE 64
21 #define CONFIG_ARM_ARCH_CP15_ERRATA
22 #define CONFIG_ARM_ERRATA_454179
23 #define CONFIG_ARM_ERRATA_430973
24 #define CONFIG_ARM_ERRATA_621766
31 #define CONFIG_OMAP_COMMON
37 #define CONFIG_MISC_INIT_R
43 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
44 #define CONFIG_SYS_PTV 2
46 #define V_NS16550_CLK 48000000
47 #define V_OSCK 26000000
48 #define V_SCLK (V_OSCK >> 1)
55 #define CONFIG_NR_DRAM_BANKS 2
56 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
57 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
63 #define CONFIG_SYS_TEXT_BASE 0x80100000
64 #define CONFIG_SYS_SDRAM_BASE 0x80000000
65 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
66 GENERATED_GBL_DATA_SIZE)
68 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
74 #define CONFIG_OMAP_GPIO
75 #define CONFIG_OMAP3_GPIO_2
76 #define CONFIG_OMAP3_GPIO_3
77 #define CONFIG_OMAP3_GPIO_4
78 #define CONFIG_OMAP3_GPIO_5
79 #define CONFIG_OMAP3_GPIO_6
85 #define CONFIG_SYS_I2C
86 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
87 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
88 #define CONFIG_SYS_I2C_OMAP34XX
89 #define CONFIG_I2C_MULTI_BUS
95 #define CONFIG_SYS_NO_FLASH
102 #define CONFIG_GENERIC_MMC
103 #define CONFIG_OMAP_HSMMC
105 #define CONFIG_CMD_MMC
111 #define CONFIG_TWL4030_POWER
117 #define CONFIG_TWL4030_INPUT
123 #define CONFIG_PARTITION_UUIDS
124 #define CONFIG_CMD_PART
130 #define CONFIG_SPL_FRAMEWORK
132 #define CONFIG_SPL_TEXT_BASE 0x40200000
133 #define CONFIG_SPL_MAX_SIZE (54 * 1024)
134 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
135 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
136 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
137 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
138 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
140 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
141 #define CONFIG_SPL_BOARD_INIT
143 #define CONFIG_SPL_LIBGENERIC_SUPPORT
144 #define CONFIG_SPL_LIBCOMMON_SUPPORT
145 #define CONFIG_SPL_LIBDISK_SUPPORT
146 #define CONFIG_SPL_SERIAL_SUPPORT
147 #define CONFIG_SPL_POWER_SUPPORT
148 #define CONFIG_SPL_GPIO_SUPPORT
149 #define CONFIG_SPL_I2C_SUPPORT
150 #define CONFIG_SPL_MMC_SUPPORT
151 #define CONFIG_SPL_FAT_SUPPORT
153 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
155 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
156 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
162 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
164 #define CONFIG_DISPLAY_CPUINFO
165 #define CONFIG_DISPLAY_BOARDINFO
167 #define CONFIG_AUTO_COMPLETE
169 #define CONFIG_SYS_LONGHELP
171 #define CONFIG_SYS_MAXARGS 16
172 #define CONFIG_SYS_CBSIZE 512
173 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
180 #ifdef CONFIG_SPL_BUILD
181 #define CONFIG_SYS_NS16550_SERIAL
182 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
185 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
186 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
187 #define CONFIG_CONS_INDEX 3
189 #define CONFIG_BAUDRATE 115200
190 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
197 #define CONFIG_USB_MUSB_PIO_ONLY
198 #define CONFIG_USB_MUSB_OMAP2PLUS
199 #define CONFIG_TWL4030_USB
205 #define CONFIG_USB_FUNCTION_FASTBOOT
207 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
208 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
210 #define CONFIG_FASTBOOT_FLASH
211 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
213 #define CONFIG_CMD_FASTBOOT
219 #define CONFIG_ENV_SIZE (128 * 1024)
220 #define CONFIG_ENV_IS_NOWHERE
222 #define CONFIG_ENV_OVERWRITE
224 #define CONFIG_EXTRA_ENV_SETTINGS \
225 "kernel_addr_r=0x82000000\0" \
226 "loadaddr=0x82000000\0" \
227 "fdt_addr_r=0x88000000\0" \
228 "fdtaddr=0x88000000\0" \
229 "ramdisk_addr_r=0x88080000\0" \
230 "pxefile_addr_r=0x80100000\0" \
231 "scriptaddr=0x80000000\0" \
232 "bootm_size=0x10000000\0" \
234 "kernel_mmc_part=3\0" \
235 "recovery_mmc_part=4\0" \
236 "fdtfile=omap3-sniper.dtb\0" \
237 "bootfile=/boot/extlinux/extlinux.conf\0" \
238 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
244 #define CONFIG_SETUP_MEMORY_TAGS
245 #define CONFIG_CMDLINE_TAG
246 #define CONFIG_INITRD_TAG
247 #define CONFIG_REVISION_TAG
248 #define CONFIG_SERIAL_TAG
254 #define CONFIG_SYS_LOAD_ADDR 0x82000000
256 #define CONFIG_ANDROID_BOOT_IMAGE
258 #define CONFIG_BOOTCOMMAND \
259 "setenv boot_mmc_part ${kernel_mmc_part}; " \
260 "if test reboot-${reboot-mode} = reboot-r; then " \
261 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
262 "if test reboot-${reboot-mode} = reboot-b; then " \
263 "echo fastboot; fastboot 0; fi; " \
264 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
265 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
266 "mmc dev ${boot_mmc_dev}; " \
267 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
268 "bootm ${kernel_addr_r};"
274 #include <config_defaults.h>
275 #include <config_distro_defaults.h>