include/configs/sniper.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * LG Optimus Black codename sniper config
   4  *
   5  * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <asm/arch/cpu.h>
  12 #include <asm/arch/omap.h>
  13
  14 /*
  15  * CPU
  16  */
  17
  18 #define CONFIG_ARM_ARCH_CP15_ERRATA
  19
  20 /*
  21  * Board
  22  */
  23
  24 #define CONFIG_MISC_INIT_R
  25
  26 /*
  27  * Clocks
  28  */
  29
  30 #define CONFIG_SYS_TIMERBASE    OMAP34XX_GPT2
  31 #define CONFIG_SYS_PTV          2
  32
  33 #define V_NS16550_CLK           48000000
  34 #define V_OSCK                  26000000
  35 #define V_SCLK                  (V_OSCK >> 1)
  36
  37 /*
  38  * DRAM
  39  */
  40
  41 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
  42 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
  43
  44 /*
  45  * Memory
  46  */
  47
  48 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  49 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  50                                          GENERATED_GBL_DATA_SIZE)
  51
  52 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024 + CONFIG_ENV_SIZE)
  53
  54 /*
  55  * I2C
  56  */
  57
  58 #define CONFIG_SYS_I2C
  59 #define CONFIG_I2C_MULTI_BUS
  60
  61 /*
  62  * Input
  63  */
  64
  65 #define CONFIG_TWL4030_INPUT
  66
  67 /*
  68  * SPL
  69  */
  70
  71 #define CONFIG_SPL_TEXT_BASE            0x40200000
  72 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  73                                          CONFIG_SPL_TEXT_BASE)
  74 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
  75 #define CONFIG_SPL_BSS_MAX_SIZE         (512 * 1024)
  76 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  77 #define CONFIG_SYS_SPL_MALLOC_SIZE      (1024 * 1024)
  78 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
  79
  80 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION              1
  81 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                 "u-boot.img"
  82
  83 #define CONFIG_SYS_CBSIZE       512
  84
  85 /*
  86  * Serial
  87  */
  88
  89 #ifdef CONFIG_SPL_BUILD
  90 #define CONFIG_SYS_NS16550_SERIAL
  91 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  92 #endif
  93
  94 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  95 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  96
  97 #define CONFIG_SYS_BAUDRATE_TABLE       { 4800, 9600, 19200, 38400, 57600, \
  98                                           115200 }
  99
 100 /*
 101  * Environment
 102  */
 103
 104 #define CONFIG_ENV_SIZE         (128 * 1024)
 105
 106 #define CONFIG_ENV_OVERWRITE
 107
 108 #define CONFIG_EXTRA_ENV_SETTINGS \
 109         "kernel_addr_r=0x82000000\0" \
 110         "loadaddr=0x82000000\0" \
 111         "fdt_addr_r=0x88000000\0" \
 112         "fdtaddr=0x88000000\0" \
 113         "ramdisk_addr_r=0x88080000\0" \
 114         "pxefile_addr_r=0x80100000\0" \
 115         "scriptaddr=0x80000000\0" \
 116         "bootm_size=0x10000000\0" \
 117         "boot_mmc_dev=0\0" \
 118         "kernel_mmc_part=3\0" \
 119         "recovery_mmc_part=4\0" \
 120         "fdtfile=omap3-sniper.dtb\0" \
 121         "bootfile=/boot/extlinux/extlinux.conf\0" \
 122         "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
 123
 124 /*
 125  * ATAGs
 126  */
 127
 128 #define CONFIG_SETUP_MEMORY_TAGS
 129 #define CONFIG_CMDLINE_TAG
 130 #define CONFIG_INITRD_TAG
 131 #define CONFIG_REVISION_TAG
 132 #define CONFIG_SERIAL_TAG
 133
 134 /*
 135  * Boot
 136  */
 137
 138 #define CONFIG_SYS_LOAD_ADDR    0x82000000
 139
 140 #define CONFIG_BOOTCOMMAND \
 141         "setenv boot_mmc_part ${kernel_mmc_part}; " \
 142         "if test reboot-${reboot-mode} = reboot-r; then " \
 143         "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
 144         "if test reboot-${reboot-mode} = reboot-b; then " \
 145         "echo fastboot; fastboot 0; fi; " \
 146         "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
 147         "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
 148         "mmc dev ${boot_mmc_dev}; " \
 149         "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
 150         "bootm ${kernel_addr_r};"
 151
 152 /*
 153  * Defaults
 154  */
 155
 156 #include <config_defaults.h>
 157
 158 #endif