include/configs/siemens-am33x-common.h

   1 /*
   2  * siemens am33x common board options
   3  * (C) Copyright 2013 Siemens Schweiz AG
   4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * U-Boot file:/include/configs/am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
  15 #define __CONFIG_SIEMENS_AM33X_COMMON_H
  16
  17 #define CONFIG_AM33XX
  18 #define CONFIG_OMAP
  19 #define CONFIG_OMAP_COMMON
  20
  21 #include <asm/arch/omap.h>
  22
  23 #define CONFIG_DMA_COHERENT
  24 #define CONFIG_DMA_COHERENT_SIZE        (1 << 20)
  25
  26 #define CONFIG_ENV_SIZE                 (0x2000)
  27 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  28 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  29 #define CONFIG_BOARD_LATE_INIT
  30 #define CONFIG_SYS_NO_FLASH
  31 #ifdef CONFIG_SIEMENS_MACH_TYPE
  32 #define CONFIG_MACH_TYPE                CONFIG_SIEMENS_MACH_TYPE
  33 #endif
  34
  35 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  36 #define CONFIG_SETUP_MEMORY_TAGS
  37 #define CONFIG_INITRD_TAG
  38
  39 #define CONFIG_SYS_CACHELINE_SIZE       64
  40
  41 /* commands to include */
  42
  43 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  44 #ifndef CONFIG_SPL_BUILD
  45 #define CONFIG_ROOTPATH         "/opt/eldk"
  46 #endif
  47
  48 #define CONFIG_ENV_OVERWRITE            1
  49 #define CONFIG_ENV_IS_NOWHERE
  50
  51 #define CONFIG_SYS_LONGHELP
  52 #define CONFIG_CMDLINE_EDITING
  53 #define CONFIG_AUTO_COMPLETE
  54 #define CONFIG_SYS_AUTOLOAD     "yes"
  55
  56 /* Clock Defines */
  57 #define V_OSCK                          24000000  /* Clock output from T2 */
  58 #define V_SCLK                          (V_OSCK)
  59
  60 /* We set the max number of command args high to avoid HUSH bugs. */
  61 #define CONFIG_SYS_MAXARGS              32
  62
  63 /* Console I/O Buffer Size */
  64 #define CONFIG_SYS_CBSIZE               1024
  65
  66 /* Print Buffer Size */
  67 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
  68                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
  69
  70 /* Boot Argument Buffer Size */
  71 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  72
  73 /*
  74  * memtest works on 8 MB in DRAM after skipping 32MB from
  75  * start addr of ram disk
  76  */
  77 #define CONFIG_SYS_MEMTEST_START        (PHYS_DRAM_1 + (64 * 1024 * 1024))
  78 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START \
  79                                         + (8 * 1024 * 1024))
  80
  81 #define CONFIG_SYS_LOAD_ADDR            0x81000000 /* Default load address */
  82
  83 #define CONFIG_MMC
  84 #define CONFIG_GENERIC_MMC
  85 #define CONFIG_OMAP_HSMMC
  86 #define CONFIG_DOS_PARTITION
  87
  88 #define CONFIG_SPI
  89 #define CONFIG_OMAP3_SPI
  90 #define CONFIG_MTD_DEVICE
  91 #define CONFIG_SF_DEFAULT_SPEED         (75000000)
  92
  93  /* Physical Memory Map */
  94 #define CONFIG_NR_DRAM_BANKS            1               /*  1 bank of DRAM */
  95 #define PHYS_DRAM_1                     0x80000000      /* DRAM Bank #1 */
  96
  97 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  98 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  99                                                 GENERATED_GBL_DATA_SIZE)
 100  /* Platform/Board specific defs */
 101 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
 102 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 103
 104 /* NS16550 Configuration */
 105 #ifdef CONFIG_SPL_BUILD
 106 #define CONFIG_SYS_NS16550_SERIAL
 107 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
 108 #endif
 109 #define CONFIG_SYS_NS16550_CLK          (48000000)
 110 #define CONFIG_SYS_NS16550_COM1         0x44e09000
 111 #define CONFIG_SYS_NS16550_COM4         0x481a6000
 112
 113 #define CONFIG_BAUDRATE         115200
 114
 115 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 116 #define CONFIG_SERIAL1                  1
 117 #define CONFIG_CONS_INDEX               1
 118
 119 /* I2C Configuration */
 120 #define CONFIG_I2C
 121 #define CONFIG_SYS_I2C
 122 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 123 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 124 #define CONFIG_SYS_I2C_OMAP24XX
 125
 126 /* Defines for SPL */
 127 #define CONFIG_SPL_FRAMEWORK
 128 #define CONFIG_SPL_TEXT_BASE            0x402F0400
 129 #define CONFIG_SPL_MAX_SIZE             (101 * 1024)
 130
 131 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 132 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 133
 134 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 135 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 136 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 137 #define CONFIG_SPL_MMC_SUPPORT
 138 #define CONFIG_SPL_FAT_SUPPORT
 139 #define CONFIG_FS_FAT
 140 #define CONFIG_SPL_I2C_SUPPORT
 141
 142 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 143 #define CONFIG_SPL_LIBDISK_SUPPORT
 144 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 145 #define CONFIG_SPL_SERIAL_SUPPORT
 146 #define CONFIG_SPL_YMODEM_SUPPORT
 147
 148 #define CONFIG_SPL_GPIO_SUPPORT
 149 #define CONFIG_SPL_WATCHDOG_SUPPORT
 150
 151 #define CONFIG_SPL_SPI_SUPPORT
 152 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 153 #define CONFIG_SPL_SPI_LOAD
 154 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 155
 156 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/am33xx/u-boot-spl.lds"
 157
 158 #define CONFIG_SPL_BOARD_INIT
 159 #define CONFIG_SPL_NAND_AM33XX_BCH
 160 #define CONFIG_SPL_NAND_SUPPORT
 161 #define CONFIG_SPL_NAND_BASE
 162 #define CONFIG_SPL_NAND_DRIVERS
 163 #define CONFIG_SPL_NAND_ECC
 164 #define CONFIG_SYS_NAND_ONFI_DETECTION
 165 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 166 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 167                                          CONFIG_SYS_NAND_PAGE_SIZE)
 168 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 169 #define CONFIG_SYS_NAND_OOBSIZE         64
 170 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 171 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 172 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 173                                          10, 11, 12, 13, 14, 15, 16, 17, \
 174                                          18, 19, 20, 21, 22, 23, 24, 25, \
 175                                          26, 27, 28, 29, 30, 31, 32, 33, \
 176                                          34, 35, 36, 37, 38, 39, 40, 41, \
 177                                          42, 43, 44, 45, 46, 47, 48, 49, \
 178                                          50, 51, 52, 53, 54, 55, 56, 57, }
 179
 180 #define CONFIG_SYS_NAND_ECCSIZE         512
 181 #define CONFIG_SYS_NAND_ECCBYTES        14
 182 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 183
 184 #define CONFIG_SYS_NAND_ECCSTEPS        4
 185 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 186                                                 CONFIG_SYS_NAND_ECCSTEPS)
 187
 188 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 189
 190 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 191
 192 /*
 193  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 194  * 64 bytes before this address should be set aside for u-boot.img's
 195  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 196  * other needs.
 197  */
 198 #define CONFIG_SYS_TEXT_BASE            0x80100000
 199 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 200 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 201
 202 /*
 203  * Since SPL did pll and ddr initialization for us,
 204  * we don't need to do it twice.
 205  */
 206 #ifndef CONFIG_SPL_BUILD
 207 #define CONFIG_SKIP_LOWLEVEL_INIT
 208 #endif
 209
 210 #ifndef CONFIG_SPL_BUILD
 211 /*
 212  * USB configuration
 213  */
 214 #define CONFIG_USB_MUSB_DSPS
 215 #define CONFIG_ARCH_MISC_INIT
 216 #define CONFIG_USB_MUSB_PIO_ONLY
 217 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 218 #undef CONFIG_USB_GADGET_DUALSPEED
 219
 220 #define CONFIG_AM335X_USB0
 221 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 222 #define CONFIG_AM335X_USB1
 223 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 224 #ifdef CONFIG_USB_MUSB_HOST
 225 #define CONFIG_USB_STORAGE
 226 #endif
 227
 228 #ifdef CONFIG_USB_MUSB_GADGET
 229 #define CONFIG_USB_ETHER
 230 #define CONFIG_USB_ETH_RNDIS
 231 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
 232 #endif /* CONFIG_USB_MUSB_GADGET */
 233
 234 /* USB DRACO ID as default */
 235 #define CONFIG_USBD_HS
 236
 237 /* USB Device Firmware Update support */
 238 #define CONFIG_USB_FUNCTION_DFU
 239 #define CONFIG_DFU_NAND
 240 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (1 << 20)
 241 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 242
 243 #endif /* CONFIG_SPL_BUILD */
 244
 245 /*
 246  * Default to using SPI for environment, etc.  We have multiple copies
 247  * of SPL as the ROM will check these locations.
 248  * 0x0 - 0x20000 : First copy of SPL
 249  * 0x20000 - 0x40000 : Second copy of SPL
 250  * 0x40000 - 0x60000 : Third copy of SPL
 251  * 0x60000 - 0x80000 : Fourth copy of SPL
 252  * 0x80000 - 0xDF000 : U-Boot
 253  * 0xDF000 - 0xE0000 : U-Boot Environment
 254  * 0xE0000 - 0x442000 : Linux Kernel
 255  * 0x442000 - 0x800000 : Userland
 256  */
 257 #if defined(CONFIG_SPI_BOOT)
 258 # undef CONFIG_ENV_IS_NOWHERE
 259 # define CONFIG_ENV_IS_IN_SPI_FLASH
 260 # define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 261 # define CONFIG_ENV_OFFSET              (892 << 10) /* 892 KiB in */
 262 # define CONFIG_ENV_SECT_SIZE           (4 << 10) /* 4 KB sectors */
 263 #endif /* SPI support */
 264
 265 /* Unsupported features */
 266 #undef CONFIG_USE_IRQ
 267
 268 #define CONFIG_DRIVER_TI_CPSW
 269 #define CONFIG_MII
 270 #define CONFIG_PHY_GIGE
 271 #define CONFIG_PHYLIB
 272 #define CONFIG_BOOTP_DEFAULT
 273 #define CONFIG_BOOTP_DNS
 274 #define CONFIG_BOOTP_DNS2
 275 #define CONFIG_BOOTP_SEND_HOSTNAME
 276 #define CONFIG_BOOTP_GATEWAY
 277 #define CONFIG_BOOTP_SUBNETMASK
 278 #define CONFIG_NET_RETRY_COUNT         10
 279
 280 #define CONFIG_NAND
 281 /* NAND support */
 282 #ifdef CONFIG_NAND
 283 #define CONFIG_CMD_NAND
 284
 285 /* UBI Support */
 286 #ifndef CONFIG_SPL_BUILD
 287 #define CONFIG_CMD_MTDPARTS
 288 #define CONFIG_MTD_PARTITIONS
 289 #define CONFIG_MTD_DEVICE
 290 #define CONFIG_RBTREE
 291 #define CONFIG_LZO
 292 #define CONFIG_CMD_UBI
 293 #define CONFIG_CMD_UBIFS
 294 #define CONFIG_MTD_UBI_FASTMAP
 295 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT      1
 296 #endif
 297
 298 /* Commen environment */
 299 #define CONFIG_PREBOOT
 300 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 301                                 "setenv bootargs ${bootargs};" \
 302                                 "mtdparts default;" \
 303                                 "draco_led 1;" \
 304                                 "dfu 0 nand 0;" \
 305                                 "draco_led 0;\0" \
 306
 307 #define COMMON_ENV_NAND_BOOT \
 308                 "nand_boot=echo Booting from nand; " \
 309                 "if test ${upgrade_available} -eq 1; then " \
 310                         "if test ${bootcount} -gt ${bootlimit}; " \
 311                                 "then " \
 312                                 "setenv upgrade_available 0;" \
 313                                 "setenv ${partitionset_active} true;" \
 314                                 "if test -n ${A}; then " \
 315                                         "setenv partitionset_active B; " \
 316                                         "env delete A; " \
 317                                 "fi;" \
 318                                 "if test -n ${B}; then " \
 319                                         "setenv partitionset_active A; " \
 320                                         "env delete B; " \
 321                                 "fi;" \
 322                                 "saveenv; " \
 323                         "fi;" \
 324                 "fi;" \
 325                 "echo set ${partitionset_active}...;" \
 326                 "run nand_args; "
 327
 328 #define COMMON_ENV_NAND_CMDS    "flash_self=run nand_boot\0" \
 329                                 "flash_self_test=setenv testargs test; " \
 330                                         "run nand_boot\0" \
 331                                 "dfu_start=echo Preparing for dfu mode ...; " \
 332                                 "run dfu_args; \0"
 333
 334 #define COMMON_ENV_SETTINGS \
 335         "verify=no \0" \
 336         "project_dir=targetdir\0" \
 337         "upgrade_available=0\0" \
 338         "altbootcmd=run bootcmd\0" \
 339         "bootlimit=3\0" \
 340         "partitionset_active=A\0" \
 341         "loadaddr=0x82000000\0" \
 342         "kloadaddr=0x81000000\0" \
 343         "script_addr=0x81900000\0" \
 344         "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 345         "nfsopts=nolock rw\0" \
 346         "ip_method=none\0" \
 347         "bootenv=uEnv.txt\0" \
 348         "bootargs_defaults=setenv bootargs " \
 349                 "console=${console} " \
 350                 "${testargs} " \
 351                 "${optargs}\0" \
 352         "siemens_help=echo; "\
 353                 "echo Type 'run flash_self' to use kernel and root " \
 354                 "filesystem on memory; echo Type 'run flash_self_test' to " \
 355                 "use kernel and root filesystem on memory, boot in test " \
 356                 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 357                 "from memory and root filesystem over NFS; echo Type " \
 358                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 359                 "filesystem over NFS; " \
 360                 "echo Set partitionset_active variable to 'A' " \
 361                 "or 'B' to select kernel and rootfs partition; " \
 362                 "echo" \
 363                 "\0"
 364
 365 /*
 366  * Variant 1 partition layout
 367  * chip-size = 256MiB
 368  *|         name |        size |           address area |
 369  *-------------------------------------------------------
 370  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 371  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 372  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 373  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 374  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 375  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 376  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 377  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 378  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 379  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 380  *-------------------------------------------------------
 381  */
 382 #define MTDIDS_NAME_STR         "omap2-nand.0"
 383 #define MTDIDS_DEFAULT          "nand0=" MTDIDS_NAME_STR
 384 #define MTDPARTS_DEFAULT_V1     "mtdparts=" MTDIDS_NAME_STR ":" \
 385                                         "128k(spl),"            \
 386                                         "128k(spl.backup1),"    \
 387                                         "128k(spl.backup2),"    \
 388                                         "128k(spl.backup3),"    \
 389                                         "1920k(u-boot),"        \
 390                                         "128k(uboot.env),"      \
 391                                         "5120k(kernel_a),"      \
 392                                         "5120k(kernel_b),"      \
 393                                         "8192k(mtdoops),"       \
 394                                         "-(rootfs)"
 395
 396 #define DFU_ALT_INFO_NAND_V1 \
 397         "spl part 0 1;" \
 398         "spl.backup1 part 0 2;" \
 399         "spl.backup2 part 0 3;" \
 400         "spl.backup3 part 0 4;" \
 401         "u-boot part 0 5;" \
 402         "u-boot.env part 0 6;" \
 403         "kernel_a part 0 7;" \
 404         "kernel_b part 0 8;" \
 405         "rootfs partubi 0 10"
 406
 407 #define CONFIG_ENV_SETTINGS_NAND_V1 \
 408         "nand_active_ubi_vol=rootfs_a\0" \
 409         "nand_active_ubi_vol_A=rootfs_a\0" \
 410         "nand_active_ubi_vol_B=rootfs_b\0" \
 411         "nand_root_fs_type=ubifs rootwait=1\0" \
 412         "nand_src_addr=0x280000\0" \
 413         "nand_src_addr_A=0x280000\0" \
 414         "nand_src_addr_B=0x780000\0" \
 415         "nand_args=run bootargs_defaults;" \
 416                 "mtdparts default;" \
 417                 "setenv ${partitionset_active} true;" \
 418                 "if test -n ${A}; then " \
 419                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
 420                         "setenv nand_src_addr ${nand_src_addr_A};" \
 421                 "fi;" \
 422                 "if test -n ${B}; then " \
 423                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
 424                         "setenv nand_src_addr ${nand_src_addr_B};" \
 425                 "fi;" \
 426                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 427                 "ubi.mtd=9,${ubi_off};" \
 428                 "setenv bootargs ${bootargs} " \
 429                 "root=${nand_root} noinitrd ${mtdparts} " \
 430                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 431                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 432                 "=mtdoops\0" \
 433         COMMON_ENV_DFU_ARGS \
 434                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
 435         COMMON_ENV_NAND_BOOT \
 436                 "nand read.i ${kloadaddr} ${nand_src_addr} " \
 437                 "${nand_img_size}; bootm ${kloadaddr}\0" \
 438         COMMON_ENV_NAND_CMDS
 439
 440 #define CONFIG_ENV_SETTINGS_V1 \
 441                 COMMON_ENV_SETTINGS \
 442         "net_args=run bootargs_defaults;" \
 443                 "mtdparts default;" \
 444                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 445                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 446                 "setenv bootargs ${bootargs} " \
 447                 "root=/dev/nfs ${mtdparts} " \
 448                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 449                 "ip=${ipaddr}:${serverip}:" \
 450                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 451         "net_nfs=echo Booting from network ...; " \
 452                 "run net_args; " \
 453                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 454                 "bootm ${kloadaddr}\0"
 455
 456 /*
 457  * Variant 2 partition layout
 458  * chip-size = 256MiB or 512 MiB
 459  *|         name |        size |           address area |
 460  *-------------------------------------------------------
 461  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 462  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 463  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 464  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 465  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 466  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 467  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 468  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 469  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 470  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 471  *-------------------------------------------------------
 472  */
 473
 474 #define MTDPARTS_DEFAULT_V2     "mtdparts=" MTDIDS_NAME_STR ":" \
 475                                         "128k(spl)," \
 476                                         "128k(spl.backup1)," \
 477                                         "128k(spl.backup2)," \
 478                                         "128k(spl.backup3)," \
 479                                         "1920k(u-boot)," \
 480                                         "512k(u-boot.env0)," \
 481                                         "512k(u-boot.env1)," \
 482                                         "512k(mtdoops)," \
 483                                         "-(rootfs)"
 484
 485 #define DFU_ALT_INFO_NAND_V2 \
 486         "spl part 0 1;" \
 487         "spl.backup1 part 0 2;" \
 488         "spl.backup2 part 0 3;" \
 489         "spl.backup3 part 0 4;" \
 490         "u-boot part 0 5;" \
 491         "u-boot.env0 part 0 6;" \
 492         "u-boot.env1 part 0 7;" \
 493         "rootfs partubi 0 9" \
 494
 495 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 496         "nand_active_ubi_vol=rootfs_a\0" \
 497         "rootfs_name=rootfs\0" \
 498         "kernel_name=uImage\0"\
 499         "nand_root_fs_type=ubifs rootwait=1\0" \
 500         "nand_args=run bootargs_defaults;" \
 501                 "mtdparts default;" \
 502                 "setenv ${partitionset_active} true;" \
 503                 "if test -n ${A}; then " \
 504                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 505                 "fi;" \
 506                 "if test -n ${B}; then " \
 507                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 508                 "fi;" \
 509                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 510                 "ubi.mtd=rootfs,2048;" \
 511                 "setenv bootargs ${bootargs} " \
 512                 "root=${nand_root} noinitrd ${mtdparts} " \
 513                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 514                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 515                 "=mtdoops\0" \
 516         COMMON_ENV_DFU_ARGS \
 517                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 518         COMMON_ENV_NAND_BOOT \
 519                 "ubi part rootfs ${ubi_off};" \
 520                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
 521                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
 522                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 523                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 524         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 525                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 526         COMMON_ENV_NAND_CMDS
 527
 528 #define CONFIG_ENV_SETTINGS_V2 \
 529                 COMMON_ENV_SETTINGS \
 530         "net_args=run bootargs_defaults;" \
 531                 "mtdparts default;" \
 532                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 533                 "setenv bootdtb ${project_dir}/kernel/dtb;" \
 534                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 535                 "setenv bootargs ${bootargs} " \
 536                 "root=/dev/nfs ${mtdparts} " \
 537                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 538                 "ip=${ipaddr}:${serverip}:" \
 539                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 540         "net_nfs=echo Booting from network ...; " \
 541                 "run net_args; " \
 542                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 543                 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
 544                 "bootm ${kloadaddr} - ${loadaddr}\0"
 545
 546 /*
 547  * Variant 3 partition layout
 548  * chip-size = 512MiB
 549  *|         name |        size |           address area |
 550  *-------------------------------------------------------
 551  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 552  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 553  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 554  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 555  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 556  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 557  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 558  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 559  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 560  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 561  *-------------------------------------------------------
 562  */
 563
 564 #define MTDPARTS_DEFAULT_V3     "mtdparts=" MTDIDS_NAME_STR ":" \
 565                                         "128k(spl),"            \
 566                                         "128k(spl.backup1),"    \
 567                                         "128k(spl.backup2),"    \
 568                                         "128k(spl.backup3),"    \
 569                                         "1920k(u-boot),"        \
 570                                         "512k(u-boot.env0),"    \
 571                                         "512k(u-boot.env1),"    \
 572                                         "300m(rootfs),"         \
 573                                         "512k(mtdoops),"        \
 574                                         "-(configuration)"
 575
 576 #define CONFIG_NAND_OMAP_GPMC
 577 #define CONFIG_NAND_OMAP_ELM
 578 #define CONFIG_SYS_NAND_BASE            (0x08000000)    /* physical address */
 579                                                         /* to access nand at */
 580                                                         /* CS0 */
 581 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND
 582                                                            devices */
 583 #if !defined(CONFIG_SPI_BOOT)
 584 #undef CONFIG_ENV_IS_NOWHERE
 585 #define CONFIG_ENV_IS_IN_NAND
 586 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 587 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 588 #endif
 589 #endif
 590
 591 #define CONFIG_OMAP_GPIO
 592
 593 /* Gpio cmd support */
 594
 595 /* Watchdog */
 596 #define CONFIG_HW_WATCHDOG
 597
 598 /* Reboot after 60 sec if bootcmd fails */
 599 #define CONFIG_RESET_TO_RETRY
 600 #define CONFIG_BOOT_RETRY_TIME 60
 601
 602 #define CONFIG_BOOTCOUNT_LIMIT
 603 #define CONFIG_BOOTCOUNT_ENV
 604
 605 #endif  /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */