2 * (C) Copyright 2009-2014
3 * Gerald Kerma <dreagle@doukki.net>
4 * Marvell Semiconductor <www.marvell.com>
5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef _CONFIG_SHEEVAPLUG_H
11 #define _CONFIG_SHEEVAPLUG_H
15 * Version number information
17 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
20 * High Level Configuration Options (easy to change)
22 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
23 #define CONFIG_KW88F6281 1 /* SOC Name */
24 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27 /* Add target to build it automatically upon "make" */
28 #define CONFIG_BUILD_TARGET "u-boot.kwb"
31 * Compression configuration
38 * Enable device tree support
40 #define CONFIG_OF_LIBFDT
43 * Commands configuration
45 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
46 #define CONFIG_CMD_BOOTZ
47 #define CONFIG_CMD_DATE
48 #define CONFIG_CMD_ENV
49 #define CONFIG_CMD_IDE
50 #define CONFIG_CMD_MII
51 #define CONFIG_CMD_MMC
54 * mv-common.h should be defined after CMD configs since it used them
55 * to enable certain macros
57 #include "mv-common.h"
60 * Environment variables configurations
62 #ifdef CONFIG_CMD_NAND
63 #define CONFIG_ENV_IS_IN_NAND 1
64 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
66 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
69 * max 4k env size is enough, but in case of nand
70 * it has to be rounded to sector size
72 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
73 #define CONFIG_ENV_ADDR 0x80000
74 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
77 * Default environment variables
79 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
80 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
81 "${x_bootcmd_usb}; bootm 0x6400000;"
83 #define CONFIG_MTDPARTS \
84 "mtdparts=orion_nand:512K(uboot)," \
85 "512K(env),1M(script),6M(kernel)," \
86 "12M(ramdisk),4M(spare),-(rootfs)"
88 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
89 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
90 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
91 "x_bootcmd_usb=usb start\0" \
92 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
94 #define MTDIDS_DEFAULT "nand0=orion_nand"
96 #define MTDPARTS_DEFAULT \
97 "mtdparts="CONFIG_MTDPARTS
100 * Ethernet Driver configuration
102 #ifdef CONFIG_CMD_NET
103 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
104 #define CONFIG_PHY_BASE_ADR 0
105 #endif /* CONFIG_CMD_NET */
108 * SDIO/MMC Card Configuration
110 #ifdef CONFIG_CMD_MMC
112 #define CONFIG_GENERIC_MMC
113 #define CONFIG_MVEBU_MMC
114 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
115 #endif /* CONFIG_CMD_MMC */
118 * SATA driver configuration
120 #ifdef CONFIG_CMD_IDE
122 #define CONFIG_IDE_PREINIT
123 #define CONFIG_DOS_PARTITION
124 #define CONFIG_MVSATA_IDE_USE_PORT0
125 #define CONFIG_MVSATA_IDE_USE_PORT1
126 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
127 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
128 #endif /* CONFIG_CMD_IDE */
131 * RTC driver configuration
133 #ifdef CONFIG_CMD_DATE
134 #define CONFIG_RTC_MV
135 #endif /* CONFIG_CMD_DATE */
140 #define CONFIG_CMD_EXT2
141 #define CONFIG_CMD_EXT4
142 #define CONFIG_CMD_FAT
143 #define CONFIG_CMD_JFFS2
144 #define CONFIG_CMD_UBI
145 #define CONFIG_CMD_UBIFS
146 #define CONFIG_RBTREE
147 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
148 #define CONFIG_MTD_PARTITIONS
149 #define CONFIG_CMD_MTDPARTS
151 #define CONFIG_SYS_ALT_MEMTEST
153 #endif /* _CONFIG_SHEEVAPLUG_H */