2 * Copyright (C) 2013 Seco S.r.l
4 * Configuration settings for the Seco Boards.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include "mx6_common.h"
14 #define CONFIG_SYS_GENERIC_BOARD
15 #define CONFIG_DISPLAY_CPUINFO
16 #define CONFIG_DISPLAY_BOARDINFO
18 #define CONFIG_CMDLINE_TAG
19 #define CONFIG_SETUP_MEMORY_TAGS
20 #define CONFIG_INITRD_TAG
21 #define CONFIG_REVISION_TAG
22 #define CONFIG_BOARD_REVISION_TAG
24 /* Size of malloc() pool */
25 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
27 #define CONFIG_BOARD_EARLY_INIT_F
28 #define CONFIG_MXC_GPIO
30 #define CONFIG_MXC_UART
31 #define CONFIG_MXC_UART_BASE UART2_BASE
33 /* allow to overwrite serial and ethaddr */
34 #define CONFIG_ENV_OVERWRITE
35 #define CONFIG_CONS_INDEX 1
36 #define CONFIG_BAUDRATE 115200
38 /* Command definition */
40 #define CONFIG_CMD_BMODE
41 #define CONFIG_CMD_SETEXPR
43 #define CONFIG_BOOTDELAY 3
45 #define CONFIG_SYS_MEMTEST_START 0x10000000
46 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
47 #define CONFIG_LOADADDR 0x12000000
48 #define CONFIG_SYS_TEXT_BASE 0x17800000
50 /* MMC Configuration */
51 #define CONFIG_FSL_ESDHC
52 #define CONFIG_FSL_USDHC
53 #define CONFIG_SYS_FSL_USDHC_NUM 2
54 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
57 #define CONFIG_CMD_MMC
58 #define CONFIG_GENERIC_MMC
59 #define CONFIG_BOUNCE_BUFFER
60 #define CONFIG_CMD_EXT2
61 #define CONFIG_CMD_FAT
62 #define CONFIG_DOS_PARTITION
64 /* Ethernet Configuration */
65 #define CONFIG_CMD_PING
66 #define CONFIG_CMD_DHCP
67 #define CONFIG_CMD_MII
68 #define CONFIG_CMD_NET
69 #define CONFIG_FEC_MXC
71 #define IMX_FEC_BASE ENET_BASE_ADDR
72 #define CONFIG_FEC_XCV_TYPE RGMII
73 #define CONFIG_ETHPRIME "FEC"
74 #define CONFIG_FEC_MXC_PHYADDR 6
76 #define CONFIG_PHY_MICREL
78 #define CONFIG_EXTRA_ENV_SETTINGS \
83 "uboot=u-boot.bin\0" \
85 "nfsroot=/opt/eldk/arm\0" \
86 "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
87 "ip_server=10.0.0.1\0" \
88 "nfs_path=/targetfs \0" \
89 "memory=mem=1024M\0" \
90 "bootdev=mmc dev 0; ext2load mmc 0:1\0" \
91 "root=root=/dev/mmcblk0p1\0" \
92 "option=rootwait rw fixrtc rootflags=barrier=1\0" \
93 "cpu_freq=arm_freq=996\0" \
94 "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
95 " ${option} ${memory} ${cpu_freq}\0" \
96 "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
97 " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
98 " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
99 " ${memory} ${cpu_freq}\0" \
100 "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
101 "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
102 " bootm 0x10800000\0" \
108 /* Miscellaneous configurable options */
109 #define CONFIG_SYS_LONGHELP
110 #define CONFIG_SYS_HUSH_PARSER
111 #define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > "
113 #define CONFIG_AUTO_COMPLETE
114 #define CONFIG_SYS_CBSIZE 256
116 /* Print Buffer Size */
117 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
118 sizeof(CONFIG_SYS_PROMPT) + 16)
119 #define CONFIG_SYS_MAXARGS 16
120 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
122 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
123 #define CONFIG_SYS_HZ 1000
125 #define CONFIG_CMDLINE_EDITING
128 /* Physical Memory Map */
129 #define CONFIG_NR_DRAM_BANKS 1
130 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
131 #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
133 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
134 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
135 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
137 #define CONFIG_SYS_INIT_SP_OFFSET \
138 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
139 #define CONFIG_SYS_INIT_SP_ADDR \
140 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
142 /* Environment organization */
143 #define CONFIG_ENV_SIZE (8 * 1024)
145 #if defined(CONFIG_ENV_IS_IN_MMC)
146 #define CONFIG_ENV_OFFSET (6 * 128 * 1024)
147 #define CONFIG_SYS_MMC_ENV_DEV 0
148 #define CONFIG_DYNAMIC_MMC_DEVNO
151 #define CONFIG_OF_LIBFDT
152 #define CONFIG_CMD_BOOTZ
154 #ifndef CONFIG_SYS_DCACHE_OFF
155 #define CONFIG_CMD_CACHE
158 #endif /* __CONFIG_H */