include/configs/sc_sps_1.h

   1 /*
   2  * SchulerControl GmbH, SC_SPS_1 module config
   3  *
   4  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
   5  * on behalf of DENX Software Engineering GmbH
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 #ifndef __CONFIGS_SC_SPS_1_H__
  10 #define __CONFIGS_SC_SPS_1_H__
  11
  12 /* System configuration */
  13 #define CONFIG_MX28                             /* i.MX28 SoC */
  14 #define MACH_TYPE_SC_SPS_1      4172
  15 #define CONFIG_MACH_TYPE        MACH_TYPE_SC_SPS_1
  16
  17 /* U-Boot Commands */
  18 #define CONFIG_SYS_NO_FLASH
  19 #define CONFIG_DISPLAY_CPUINFO
  20 #define CONFIG_DOS_PARTITION
  21
  22 #define CONFIG_CMD_CACHE
  23 #define CONFIG_CMD_DHCP
  24 #define CONFIG_CMD_EXT2
  25 #define CONFIG_CMD_FAT
  26 #define CONFIG_CMD_GPIO
  27 #define CONFIG_CMD_MII
  28 #define CONFIG_CMD_MMC
  29 #define CONFIG_CMD_PING
  30 #define CONFIG_CMD_USB
  31
  32 /* Memory configuration */
  33 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  34 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  35 #define PHYS_SDRAM_1_SIZE               0x40000000      /* Max 1 GB RAM */
  36 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  37
  38 /* Environment */
  39 #define CONFIG_ENV_SIZE                 (16 * 1024)
  40 #define CONFIG_ENV_IS_IN_MMC
  41
  42 /* Environment is in MMC */
  43 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
  44 #define CONFIG_ENV_OFFSET               (256 * 1024)
  45 #define CONFIG_SYS_MMC_ENV_DEV          0
  46 #else
  47 #define CONFIG_ENV_IS_NOWHERE
  48 #endif
  49
  50 /* FEC Ethernet on SoC */
  51 #ifdef CONFIG_CMD_NET
  52 #define CONFIG_FEC_MXC
  53 #define CONFIG_PHYLIB
  54 #define CONFIG_PHY_SMSC
  55 #endif
  56
  57 /* USB */
  58 #ifdef CONFIG_CMD_USB
  59 #define CONFIG_EHCI_MXS_PORT0
  60 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  61 #define CONFIG_USB_STORAGE
  62 #endif
  63
  64 /* Booting Linux */
  65 #define CONFIG_BOOTDELAY        3
  66 #define CONFIG_BOOTFILE         "uImage"
  67 #define CONFIG_BOOTARGS         "console=ttyAMA0,115200"
  68 #define CONFIG_BOOTCOMMAND      "bootm"
  69 #define CONFIG_LOADADDR         0x42000000
  70 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  71
  72 /* Extra Environment */
  73 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  74         "update_sd_firmware_filename=u-boot.sd\0"                       \
  75         "update_sd_firmware="           /* Update the SD firmware partition */ \
  76                 "if mmc rescan ; then "                                 \
  77                 "if tftp ${update_sd_firmware_filename} ; then "        \
  78                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  79                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
  80                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; "               \
  81                 "fi ; "                                                 \
  82                 "fi\0"
  83
  84 /* The rest of the configuration is shared */
  85 #include <configs/mxs.h>
  86
  87 #endif /* __CONFIGS_SC_SPS_1_H__ */